Download or read book Development of UV Optical Measurements of Nitric Oxide and Hydroxyl Radical at the Exit of High Pressure Gas Turbine Combustors written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-02 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurements of nitric oxide (NO) and hydroxyl radical (OR) have been made in a laboratory flat flame at pressures up to 30 atm using line-of-sight resonant absorption. Data are reported at equivalence ratios of 0.98 and 1.3 and pressures of 1, 5, 10, 20 and 30 atm. The performance of the in-situ LTV absorption technique with assessed at these elevated pressures by comparing the measured absorption with those predicted by detailed theoretical spectroscopic models for NO and OH. Previous to this experiment the resonant models had not been verified at pressures greater than two atmospheres. Agreement within 25% was found between the measurements and predictions with only slight modification of the existing models for both NO and OH to account for line center shifting and pressure broadening. Continuum interference of hot oxygen (O2) on the NO absorption spectra was not significant in the interpretation of the data. The optical methods used in this study are distinct from laser-based diagnostics such as laser induced fluorescence and, hence, have the potential to provide independent verification of the laser-based measurements. The methodology is also of sufficient simplicity to be hardened into a portable optical measurement system that can be deployed in gas turbine engine test cells. A miniature fiber optic couple portable instrument is described. Liscinsky, D. S. and Knight, B. A. and Shirley, J. A. Glenn Research Center NAS3-27593; RTOP 538-08-12...
Download or read book Development of UV Optical Measurements of Nitric Oxide and Hydroxyl Radical at the Exit of High Pressure Gas Turbine Combustors written by and published by . This book was released on 1998 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1999-07 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New and Future Developments in Catalysis written by Steven L Suib and published by Newnes. This book was released on 2013-07-19 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: New and Future Developments in Catalysis is a package of seven books that compile the latest ideas concerning alternate and renewable energy sources and the role that catalysis plays in converting new renewable feedstock into biofuels and biochemicals. Both homogeneous and heterogeneous catalysts and catalytic processes will be discussed in a unified and comprehensive approach. There will be extensive cross-referencing within all volumes.The use of solar energy during various catalytic chemical processes for the production of an array of chemical products is the theme of this volume. Photocatalysis is a topic of increasing importance due to its essential role in many of today's environmental and energy source problems. The use of solar energy for catalytic reactions results in a carbon dioxide–neutral process. All photocatalytic processes and the future developments in this area are discussed, including an economic analysis of the various processes. - Offers in-depth coverage of all catalytic topics of current interest and outlines future challenges and research areas - A clear and visual description of all parameters and conditions, enabling the reader to draw conclusions for a particular case - Outlines the catalytic processes applicable to energy generation and design of green processes
Download or read book Combustion Engines Development written by Günter P. Merker and published by Springer Science & Business Media. This book was released on 2011-09-24 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engines Development nowadays is based on simulation, not only of the transient reaction of vehicles or of the complete driveshaft, but also of the highly unsteady processes in the carburation process and the combustion chamber of an engine. Different physical and chemical approaches are described to show the potentials and limits of the models used for simulation.
Download or read book Industrial Burners Handbook written by Jr., Charles E. Baukal and published by CRC Press. This book was released on 2003-10-29 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid development in the field precipitated by the increased demand for clean burner systems has made the Industrial Burners Handbook into the fields go-to resource. With this resource, bestselling author, editor, and combustion expert Charles Baukal, Jr. has put together a comprehensive reference dedicated to the design and applications of indust
Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Download or read book Flow and Combustion in Advanced Gas Turbine Combustors written by Johannes Janicka and published by Springer Science & Business Media. This book was released on 2012-10-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: With regard to both the environmental sustainability and operating efficiency demands, modern combustion research has to face two main objectives, the optimization of combustion efficiency and the reduction of pollutants. This book reports on the combustion research activities carried out within the Collaborative Research Center (SFB) 568 “Flow and Combustion in Future Gas Turbine Combustion Chambers” funded by the German Research Foundation (DFG). This aimed at designing a completely integrated modeling and numerical simulation of the occurring very complex, coupled and interacting physico-chemical processes, such as turbulent heat and mass transport, single or multi-phase flows phenomena, chemical reactions/combustion and radiation, able to support the development of advanced gas turbine chamber concepts
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book Laser Diagnostics for Combustion Temperature and Species written by Alan C. Eckbreth and published by CRC Press. This book was released on 1996-10-10 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on spectroscopically-based, spatially-precise, laser techniques for temperature and chemical composition measurements in reacting and non-reacting flows, this book makes these powerful and important new tools in combustion research
Download or read book Air Quality Criteria for Nitrogen Oxides written by United States. Environmental Protection Agency. Air Pollution Control Office and published by . This book was released on 1971 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Techno Economic Challenges of Green Ammonia as an Energy Vector written by Agustin Valera-Medina and published by Academic Press. This book was released on 2020-09-30 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techno-Economic Challenges of Green Ammonia as an Energy Vector presents the fundamentals, techno-economic challenges, applications, and state-of-the-art research in using green ammonia as a route toward the hydrogen economy. This book presents practical implications and case studies of a great variety of methods to recover stored energy from ammonia and use it for power, along with transport and heating applications, including its production, storage, transportation, regulations, public perception, and safety aspects. As a unique reference in this field, this book can be used both as a handbook by researchers and a source of background knowledge by graduate students developing technologies in the fields of hydrogen economy, hydrogen energy, and energy storage. - Includes glossaries, case studies, practical concepts, and legal, public perception, and policy viewpoints that allow for thorough, practical understanding of the use of ammonia as energy carrier - Presents its content in a modular structure that can be used in sequence, as a handbook, in individual parts or as a field reference - Explores the use of ammonia, both as a medium for hydrogen storage and an energy vector unto itself
Download or read book Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants written by R. A. Nadkarni and published by Astm International. This book was released on 2000 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes the essential elements of all analytical tests used to characterize petroleum products. The 350 plus entries are alphabetically arranged by chemical and physical properties, such as apparent viscosity, density, metal analysis, sulfur determination, vapor pressure, and water. Each entry co
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book Oxyfuel Combustion for Clean Energy Applications written by Medhat A. Nemitallah and published by Springer. This book was released on 2019-02-11 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to be the reference book in the area of oxyfuel combustion, covering the fundamentals, design considerations and current challenges in the field. Its first part provides an overview of the greenhouse gas emission problem and the current carbon capture and sequestration technologies. The second part introduces oxy-fuel combustion technologies with emphasis on system efficiency, combustion and emission characteristics, applications and related challenges. The third part focuses on the recent developments in ion transport membranes and their performance in both oxygen separation units and oxygen transport reactors (OTRs). The fourth part presents novel approaches for clean combustion in gas turbines and boilers. Computational modelling and optimization of combustion in gas turbine combustors and boiler furnaces are presented in the fifth part with some numerical results and detailed analyses.
