Download or read book Development of Nanoimprint Lithography and Its Applications in Device Fabrication written by Xing Cheng and published by . This book was released on 2005 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoimprint Lithography An Enabling Process for Nanofabrication written by Weimin Zhou and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoimprint Lithography: An enabling process for nanofabrication presents a comprehensive description of nanotechnology that is one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures, and an emerging lithography candidates for 22, 16 and 11 nm nodes. It provides the exciting, multidisciplinary field, offering a wide range of topics covering: principles, process, material and application. This book would be of specific interest for researchers and graduate students in the field of nanoscience, nanotechnology and nanofabrication, material, physical, chemical, electric engineering and biology. Dr. Weimin Zhou is an associate professor at Shanghai Nanotechnology Promotion Center, China.
Download or read book Nanofabrication written by Ampere A. Tseng and published by World Scientific. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. This is the first book solely dedicated to the manufacturing technology in nanoscale structures, devices, and systems and is designed to satisfy the growing demands of researchers, professionals, and graduate students.Both conventional and non-conventional fabrication technologies are introduced with emphasis on multidisciplinary principles, methodologies, and practical applications. While conventional technologies consider the emerging techniques developed for next generation lithography, non-conventional techniques include scanning probe microscopy lithography, self-assembly, and imprint lithography, as well as techniques specifically developed for making carbon tubes and molecular circuits and devices.
Download or read book Recent Advances in Nanofabrication Techniques and Applications written by Bo Cui and published by BoD – Books on Demand. This book was released on 2011-12-02 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has experienced a rapid growth in the past decade, largely owing to the rapid advances in nanofabrication techniques employed to fabricate nano-devices. Nanofabrication can be divided into two categories: "bottom up" approach using chemical synthesis or self assembly, and "top down" approach using nanolithography, thin film deposition and etching techniques. Both topics are covered, though with a focus on the second category. This book contains twenty nine chapters and aims to provide the fundamentals and recent advances of nanofabrication techniques, as well as its device applications. Most chapters focus on in-depth studies of a particular research field, and are thus targeted for researchers, though some chapters focus on the basics of lithographic techniques accessible for upper year undergraduate students. Divided into five parts, this book covers electron beam, focused ion beam, nanoimprint, deep and extreme UV, X-ray, scanning probe, interference, two-photon, and nanosphere lithography.
Download or read book Nanoimprint Lithography written by Hongbo Lan and published by Nova Science Publishers. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lithography, the fundamental fabrication process of semiconductor devices, has been playing a critical role in micro-nanofabrication technologies and manufacturing of Integrated Circuits (IC). Traditional optical lithography including contact and project photolithography has contributed significantly to the semiconductor device advancements. Currently, maintaining the rapid pace of half-pitch reduction requires overcoming the challenge of improving and extending the incumbent optical projection lithography technology while simultaneously developing alternative, next generation lithography (NGL) technologies to be used when optical projection lithography is no longer more economical than the alternatives. Furthermore, NIL is also one of the most promising low-cost, high-throughput technologies for manufacturing nanostructures as this highly technical book will give new insight to.
Download or read book Nanolithography written by M Feldman and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated circuits, and devices fabricated using the techniques developed for integrated circuits, have steadily gotten smaller, more complex, and more powerful. The rate of shrinking is astonishing – some components are now just a few dozen atoms wide. This book attempts to answer the questions, “What comes next? and “How do we get there? Nanolithography outlines the present state of the art in lithographic techniques, including optical projection in both deep and extreme ultraviolet, electron and ion beams, and imprinting. Special attention is paid to related issues, such as the resists used in lithography, the masks (or lack thereof), the metrology needed for nano-features, modeling, and the limitations caused by feature edge roughness. In addition emerging technologies are described, including the directed assembly of wafer features, nanostructures and devices, nano-photonics, and nano-fluidics. This book is intended as a guide to the researcher new to this field, reading related journals or facing the complexities of a technical conference. Its goal is to give enough background information to enable such a researcher to understand, and appreciate, new developments in nanolithography, and to go on to make advances of his/her own. Outlines the current state of the art in alternative nanolithography technologies in order to cope with the future reduction in size of semiconductor chips to nanoscale dimensions Covers lithographic techniques, including optical projection, extreme ultraviolet (EUV), nanoimprint, electron beam and ion beam lithography Describes the emerging applications of nanolithography in nanoelectronics, nanophotonics and microfluidics
Download or read book Alternative Lithography written by Clivia M. Sotomayor Torres and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good old Gutenberg could not have imagined that his revolutionary printing concept which so greatly contributed to dissemination of knowledge and thus today 's wealth, would have been a source of inspiration five hundred years later. Now, it seems intuitive that a simple way to produce a large number of replicates is using a mold to emboss pattern you need, but at the nanoscale nothing is simple: the devil is in the detail. And this book is about the "devil". In the following 17 chapters, the authors-all of them well recognized and active actors in this emerging field-describe the state-of-the-art, today 's technological bottlenecks and the prospects for micro-contact printing and nanoimprint lithography. Many results of this book originate from projects funded by the European Com mission through its "Nanotechnology Information Devices" (NID) initiative. NID was launched with the objective to develop nanoscale devices for the time when the red brick scenario of the ITRS roadmap would be reached. It became soon clear however, that there was no point to investigate only alternative devices to CMOS, but what was really needed was an integrated approach that took into account more facets of this difficult undertaking. Technologically speaking , this meant to have a coherent strategy to develop novel devices, nanofabrication tools and circuit & system architectures at the same time.
Download or read book Micro Nanolithography written by Jagannathan Thirumalai and published by BoD – Books on Demand. This book was released on 2018-05-02 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to give proficient people a comprehensive review of up-to-date global improvements in hypothetical and experimental evidences, perspectives and prospects of some newsworthy instrumentation and its numerous technological applications for a wide range of lithographic fabrication techniques. The present theme of this book is concomitant with the lithographic ways and means of deposition, optimization parameters and their wide technological applications. This book consists of six chapters comprehending with eminence of lithography, fabrication and reproduction of periodic nanopyramid structures using UV nanoimprint lithography for solar cell applications, large-area nanoimprint lithography and applications, micro-/nanopatterning on polymers, OPC under immersion lithography associated to novel luminescence applications, achromatic Talbot lithography (ATL) and the soft X-ray interference lithography. Individual chapters provide a base for a wide range of readers from different fiels, students and researchers, who may be doing research pertinent to the topics discussed in this book and find basic as well as advanced principles of designated subjects related to these phenomena explained plainly. The book contains six chapters by experts in different fields of lithographic fabrication and technology from over 15 research institutes across the globe.
Download or read book Nanofabrication written by Maria Stepanova and published by Springer Science & Business Media. This book was released on 2011-11-08 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended to update scientists and engineers on the current state of the art in a variety of key techniques used extensively in the fabrication of structures at the nanoscale. The present work covers the essential technologies for creating sub 25 nm features lithographically, depositing layers with nanometer control, and etching patterns and structures at the nanoscale. A distinguishing feature of this book is a focus not on extension of microelectronics fabrication, but rather on techniques applicable for building NEMS, biosensors, nanomaterials, photonic crystals, and other novel devices and structures that will revolutionize society in the coming years.
Download or read book Recent Advances in Nanofabrication Techniques and Applications written by Bo Cui and published by IntechOpen. This book was released on 2011-12-02 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has experienced a rapid growth in the past decade, largely owing to the rapid advances in nanofabrication techniques employed to fabricate nano-devices. Nanofabrication can be divided into two categories: "bottom up" approach using chemical synthesis or self assembly, and "top down" approach using nanolithography, thin film deposition and etching techniques. Both topics are covered, though with a focus on the second category. This book contains twenty nine chapters and aims to provide the fundamentals and recent advances of nanofabrication techniques, as well as its device applications. Most chapters focus on in-depth studies of a particular research field, and are thus targeted for researchers, though some chapters focus on the basics of lithographic techniques accessible for upper year undergraduate students. Divided into five parts, this book covers electron beam, focused ion beam, nanoimprint, deep and extreme UV, X-ray, scanning probe, interference, two-photon, and nanosphere lithography.
Download or read book Microfabrication and Nanomanufacturing written by Mark J. Jackson and published by CRC Press. This book was released on 2005-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small products are made. Microfabrication and Nanomanufacturing focuses on the technology of fabrication and manufacturing of engineering materials at these levels. The book provides an overview of techniques used in the semiconductor industry. It also discusses scaling and manufacturing processes operating at the nanoscale for non-semiconductor applications; the construction of nanoscale components using established lithographic techniques; bulk and surface micromachining techniques used for etching, machining, and molding procedures; and manufacturing techniques such as injection molding and hot embossing. This authoritative compilation describes non-traditional micro and nanoscale processing that uses a newly developed technique called pulsed water jet machining as well as the efficient removal of materials using optical energy. Additional chapters focus on the development of nanoscale processes for producing products other than semiconductors; the use of abrasive particles embedded in porous tools; and the deposition and application of nanocrystalline diamond. Economic factors are also presented and concern the promotion and commercialization of micro and nanoscale products and how demand will eventually drive the market.
Download or read book Nanoimprinting and its Applications written by Akihiro Miyauchi and published by CRC Press. This book was released on 2019-06-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoimprinting has grown rapidly since it was proposed in 1995 by Prof. Chou. Now machines, resins, and molds for nanoimprinting are commercially available worldwide. The application fields of nanoimprinting are expanding to not only electronics but also optics, biology, and energy because nanoimprinting is a simple and convenient method for nanofabrication, and some devices are now being mass-produced. In the near future, the application of nanoimprinting in display and semiconductor fields is expected. This book explains the fundamentals of nanoimprinting in terms of materials, processes, and machines. It also describes the applications of nanoimprinting in optics, biology, energy, and electronics. In addition, it includes as many practical examples of nanoimprinting as possible. The fundamentals will help advanced undergraduate and graduate students understand nanoimprinting. The examples will be useful for both researchers working in nanoimprinting for the first time and engineers involved in research and development of various devices using nanostructures.
Download or read book Nanophotonic Devices Applications and Fabrication by Nanoimprint Lithography written by Shufeng Bai and published by . This book was released on 2007 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Nanoimprint Lithography for Nano devices and Nanofabrication written by Wei Wu and published by . This book was released on 2003 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microlithography written by Bruce W. Smith and published by CRC Press. This book was released on 2018-10-03 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the bestselling Microlithography: Science and Technology provides a balanced treatment of theoretical and operational considerations, from elementary concepts to advanced aspects of modern submicron microlithography. Each chapter reflects the current research and practices from the world's leading academic and industrial laboratories detailed by a stellar panel of international experts. New in the Second Edition In addition to updated information on existing material, this new edition features coverage of technologies developed over the last decade since the first edition appeared, including: Immersion Lithography 157nm Lithography Electron Projection Lithography (EPL) Extreme Ultraviolet (EUV) Lithography Imprint Lithography Photoresists for 193nm and Immersion Lithography Scatterometry Microlithography: Science and Technology, Second Edition authoritatively covers the physics, chemistry, optics, metrology tools and techniques, resist processing and materials, and fabrication methods involved in the latest generations of microlithography such as immersion lithography and extreme ultraviolet (EUV) lithography. It also looks ahead to the possible future systems and technologies that will bring the next generations to fruition. Loaded with illustrations, equations, tables, and time-saving references to the most current literature, this book is the most comprehensive and reliable source for anyone, from student to seasoned professional, looking to achieve robust, accurate, and cost-effective microlithography processes and systems.
Download or read book Annual Review of Nano Research written by C. Jeffrey Brinker and published by World Scientific. This book was released on 2010 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annual Review of Nano Research, Volume 3 focuses mainly on nanofabrication, nanomaterials and nanostructures, and energy application of nanomaterials. All the review chapters are contributed by well-published scientists and bring the most recent advancement in selected topics to the readers. This review volume will serve dual purposes: either as an excellent introduction to scientists whose expertise lie in different fields but who are interested in learning about nanotechnology, or as a quick reference for experts active in the field of nanoscience and nanotechnology. Sample Chapter(s). Chapter 1: Nanoscale Biosensors and Biochips (64 KB). Contents: Nanoscale Biosensors and Biochips (W R Leifert et al.); Surface Modifications and Applications of Magnetic and Selective Nonmagnetic Nanoparticles (R Shen & H Yang); Progress in Bionanocomposite Materials (E Ruiz-Hitzky et al.); Mesoporous Silica Nanoparticles: Synthesis and Applications (J L Vivero-Escoto et al.); Nanostructured Mesoporous Materials as Drug Delivery Systems (I Izquierdo-Barba et al.); Chemical Synthesis, Self-Assembly and Applications of Magnetic Nanoparticles (S Peng et al.); Recent Development and Applications of Nanoimprint Technology (X Cheng & L J Guo); Three-Dimensional Nanostructure Fabrication by Focused-Ion-Beam Chemical-Vapor-Deposition (S Matsui); Dye-Sensitized Solar Cells Based on Nanostructured Zinc Oxide (Q-F Zhang & G-Z Cao); Nanocomposites as High Efficiency Thermoelectric Materials (S J Thiagarajan et al.); Nanostructured Materials for Hydrogen Storage (S Sepehri & G-Z Cao); Recent Advances in the Characterization of Mesoporous Materials by Physical Adsorption (M Thommes). Readership: Research scientists and engineers in academia, research institutes and industry, as well as graduate students and upper-level undergraduate students in the physical sciences and engineering.
Download or read book Nanofabrication written by José María de Teresa and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive edited volume on important and up-to-date nanolithography techniques and applications. The book includes an introduction on the importance of nanolithography in today's research and technology, providing examples of its applications. The remainder of the book is split into two sections. The first section contains the most important and established nanolithography techniques. As well as a detailed description of each technique, the reader can obtain useful information about the main advantages and drawbacks of each technique in terms of resolution, throughput, number of steps needed, cost, etc. At the end of this section, the reader will be able to decide which technique to use for different applications. The second section explores more specific applications of the nanolithography techniques previously described; as well as new techniques and applications. In some cases, the processes described in these chapters involve a combination of several nanolithography techniques. This section is less general but provides the reader with real examples.
