Download or read book Energy Related Material Flow Simulation in Production and Logistics written by Sigrid Wenzel and published by Springer Nature. This book was released on 2024-01-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides for the first time an overview on the current approaches and applications of energy aspects in production and logistics by the use of simulation techniques. During the last decade, the importance of energy in the material flow processes has become more and more important. The pressure to reduce the environmental footprint of production and logistics systems will even intensify in future. Therefore, enterprises have started to integrate the use of energy into their planning processes much more than before, even designing feedback loops, e.g., from energy control to production control. This receives additional attention with the increasing use of renewable, but less reliable, energy sources. Care must be taken to establish processes that aim to use energy when it is available. As an example, many industrial processes like melting or coating have significant energy demands, but could vary the point of time of its consumption within specific limits, leading to a very high complexity. ​ It discusses the construction and application of energy-specific performance indicators and analyzes the input information that needs to be acquired before implementing suitable models. On this basis, concrete technical solutions are introduced.

Download or read book International Symposium on Computer and Information Sciences written by Erol Gelenbe and published by CRC Press. This book was released on 2022-09-16 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from an October 2002 symposium describe research in areas including algorithms, artificial intelligence, computer graphics, computer networks, databases, evolutionary computation, graph theory, image processing, multimedia technology, software engineering, and software performance engineering

Download or read book Tecnomatix Plant Simulation written by Steffen Bangsow and published by Springer. This book was released on 2015-06-09 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces the development of simulation models as well as the implementation and evaluation of simulation experiments with Tecnomatix Plant Simulation. It deals with all users of Plant Simulation, who have more complex tasks to handle. It also looks for an easy entry into the program. Particular attention has been paid to introduce the simulation flow language SimTalk and its use in various areas of the simulation. The author demonstrates with over 200 examples how to combine the blocks for simulation models and how to deal with SimTalk for complex control and analysis tasks. The contents of this book ranges from a description of the basic functions of the material flow blocks to demanding topics such as the realization of a database-supported warehouse control by using the SQLite interface or the exchange of data by using XML, ActiveX, COM or DDE.

Download or read book Progress in Materials Handling and Logistics written by John A. White and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material handling and logistics have become especially important to industrialists because of the competitive advantage that results from using the right methods to provide the right amount of the right material at the right place, at the right time, in the right condition, in the right sequence, in the right orientation, and at the right cost. But, what are the right methods? The emergence of sophisticated control systems, coupled with advances in hardware design, has resulted in a wide variety oftechno logical alternatives availablefor practically any application. Yet, with the emergence of just-in-time methods and the apparent success of the firms that have relied on the use of people and" simple" rules, rather than technology, the proper role of hardware and software in material handling and logistics is open to debate. Despite all that has been accomplished to date, the design of material handling and logistics systems remains an art as well as a science. Regardless of whether it is people, conveyors, lift trucks, robots, guided vehicles, laser scanners, storage/retrieval machines, carousels, voice encoding, machine vision, automatic palletizers, or other methods that are appropriate, selecting the right methods for moving, storing, and controlling material is vital. It is important that the selection decision be made after consideration is given to the requirements for amount, material, place, time, condition, sequence, orientation, and cost.

Download or read book Manufacturing Systems and Technologies for the New Frontier written by Mamoru Mitsuishi and published by Springer Science & Business Media. This book was released on 2008-05-14 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collected here are 112 papers concerned with all manner of new directions in manufacturing systems given at the 41st CIRP Conference on Manufacturing Systems. The high-quality material presented in this volume includes reports of work from both scientific and engineering standpoints and several invited and keynote papers addressing the current cutting edge and likely future trends in manufacturing systems. The book’s subjects include: (1) new trends in manufacturing systems design: sustainable design, ubiquitous manufacturing, emergent synthesis, service engineering, value creation, cost engineering, human and social aspects of manufacturing, etc.; (2) new applications for manufacturing systems – medical, life-science, optics, NEMS, etc.; (3) intelligent use of advanced methods and new materials – new manufacturing process technologies, high-hardness materials, bio-medical materials, etc.; (4) integration and control for new machines – compound machine tools, rapid prototyping, printing process integration, etc.

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.

Download or read book Virtual Product Creation in Industry written by Rainer Stark and published by Springer Nature. This book was released on 2022-01-01 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, digital technologies represent an absolute must when it comes to creating new products and factories. However, day-to-day product development and manufacturing engineering operations have still only unlocked roughly fifty percent of the "digital potential". The question is why? This book provides compelling answers and remedies to that question. Its goal is to identify the main strengths and weaknesses of today’s set-up for digital engineering working solutions, and to outline important trends and developments for the future. The book concentrates on explaining the critical basics of the individual technologies, before going into deeper analysis of the virtual solution interdependencies and guidelines on how to best align them for productive deployment in industrial and collaborative networks. Moreover, it addresses the changes needed in both, technical and management skills, in order to avoid fundamental breakdowns in running information technologies for virtual product creation in the future.

Download or read book Design and Operation of Automated Container Storage Systems written by Nils Kemme and published by Springer Science & Business Media. This book was released on 2012-11-07 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The storage yard is the operational and geographical centre of most seaport container terminals. Therefore, it is of particular importance for the whole terminal system and plays a major role for trade and transport flows. One of the latest trends in container-storage operations is the automated Rail-Mounted-Gantry-Crane system, which offers dense stacking, and offers low labour costs. This book investigates whether the operational performance of container terminals is influenced by the design of these storage systems and to what extent the performance is affected by the terminal's framework conditions, and discusses the strategies applied for container stacking and crane scheduling. A detailed simulation model is presented to compare the performance effects of alternative storage designs, innovative planning strategies, and other influencing factors. The results have useful implications future research, practical terminal planning and optimisation.

Download or read book Advanced Manufacturing and Automation XIII written by Yi Wang and published by Springer Nature. This book was released on with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Realising CIM s Industrial Potential written by C. Kooij and published by IOS Press. This book was released on 1993 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CIM-Europe provides a focal point for reporting on progress in Computer Integrated Manufacturing (CIM). CIM practitioners, decision makers and researchers exchange experiences gained in developing and implementing CIM technologies. This work deals with the application of technology innovation to industrial demand.

Download or read book Defense Science Board task force report engineering in the manufacturing process written by United States. Defense Science Board. Task Force on Engineering in the Manufacturing Process and published by DIANE Publishing. This book was released on 1993 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Discrete and Continuous Simulation written by Susmita Bandyopadhyay and published by CRC Press. This book was released on 2014-06-25 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: When it comes to discovering glitches inherent in complex systems—be it a railway or banking, chemical production, medical, manufacturing, or inventory control system—developing a simulation of a system can identify problems with less time, effort, and disruption than it would take to employ the original. Advantageous to both academic and industrial practitioners, Discrete and Continuous Simulation: Theory and Practice offers a detailed view of simulation that is useful in several fields of study. This text concentrates on the simulation of complex systems, covering the basics in detail and exploring the diverse aspects, including continuous event simulation and optimization with simulation. It explores the connections between discrete and continuous simulation, and applies a specific focus to simulation in the supply chain and manufacturing field. It discusses the Monte Carlo simulation, which is the basic and traditional form of simulation. It addresses future trends and technologies for simulation, with particular emphasis given to .NET technologies and cloud computing, and proposes various simulation optimization algorithms from existing literature. Includes chapters on input modeling and hybrid simulation Introduces general probability theory Contains a chapter on Microsoft® ExcelTM and MATLAB®/Simulink® Discusses various probability distributions required for simulation Describes essential random number generators Discrete and Continuous Simulation: Theory and Practice defines the simulation of complex systems. This text benefits academic researchers in industrial/manufacturing/systems engineering, computer sciences, operations research, and researchers in transportation, operations management, healthcare systems, and human–machine systems.

Download or read book Multiproduct Plants written by Joachim Rauch and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the chemical industry, just in time delivery and ever more efficient processes are prime requisites for competitiveness. High end products require a wide product diversity resulting in lower quantities of each single product. The answer to the problem are multiproduct plants designed to meet changing requirements. Already at design stage, different potential requirements are taken into consideration allowing technical equipment to be installed according to the desired product. Reconfiguration can be achieved quickly through exchange of readily available components without costly refitting ot the entire plant. This is the first comprehensive source of information on this modern topic, treating the different concepts known for multiproduct plants, their technical realization, possible uses for the production of chemicals, the choice of the construction materials, as well as safety considerations.

Download or read book Advances in Production Management Systems Towards Smart Production Management Systems written by Farhad Ameri and published by Springer Nature. This book was released on 2019-08-23 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 566 and 567 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2019, held in Austin, TX, USA. The 161 revised full papers presented were carefully reviewed and selected from 184 submissions. They discuss globally pressing issues in smart manufacturing, operations management, supply chain management, and Industry 4.0. The papers are organized in the following topical sections: lean production; production management in food supply chains; sustainability and reconfigurability of manufacturing systems; product and asset life cycle management in smart factories of industry 4.0; variety and complexity management in the era of industry 4.0; participatory methods for supporting the career choices in industrial engineering and management education; blockchain in supply chain management; designing and delivering smart services in the digital age; operations management in engineer-to-order manufacturing; the operator 4.0 and the Internet of Things, services and people; intelligent diagnostics and maintenance solutions for smart manufacturing; smart supply networks; production management theory and methodology; data-driven production management; industry 4.0 implementations; smart factory and IIOT; cyber-physical systems; knowledge management in design and manufacturing; collaborative product development; ICT for collaborative manufacturing; collaborative technoloy; applications of machine learning in production management; and collaborative technology.

Download or read book Advanced Manufacturing and Sustainable Logistics written by Wilhelm Dangelmaier and published by Springer. This book was released on 2010-04-15 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 8th International Heinz Nixdorf Symposium, IHNS 2010, held in Paderborn, Germany, April 21-22, 2010, under the title "Changing Paradigms: Advanced Manufacturing and Sustainable Logistics". The 27 full and two short papers presented in this book were carefully reviewed and selected from a total of 63 submissions. They are grouped in five parts on Supply Chain Management, Production Logistics and Industrial Engineering, Operations Research Techniques, Humanitarian Logistics, and Simulation. The presentation is completed by nine invited keynote papers from renowned international experts in these fields.

Download or read book Directory of Federal Laboratory Technology Resources written by and published by . This book was released on 1993 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Directory of Federal Laboratory and Technology Resources written by and published by DIANE Publishing. This book was released on 1994 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the individual capabilities of each of 1,900 unique resources in the federal laboratory system, and provides the name and phone number of each contact. Includes government laboratories, research centers, testing facilities, and special technology information centers. Also includes a list of all federal laboratory technology transfer offices. Organized into 72 subject areas. Detailed indices.