Download or read book Model Uncertainties in Foundation Design written by Chong Tang and published by CRC Press. This book was released on 2021-03-16 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Uncertainties in Foundation Design is unique in the compilation of the largest and the most diverse load test databases to date, covering many foundation types (shallow foundations, spudcans, driven piles, drilled shafts, rock sockets and helical piles) and a wide range of ground conditions (soil to soft rock). All databases with names prefixed by NUS are available upon request. This book presents a comprehensive evaluation of the model factor mean (bias) and coefficient of variation (COV) for ultimate and serviceability limit state based on these databases. These statistics can be used directly for AASHTO LRFD calibration. Besides load test databases, performance databases for other geo-structures and their model factor statistics are provided. Based on this extensive literature survey, a practical three-tier scheme for classifying the model uncertainty of geo-structures according to the model factor mean and COV is proposed. This empirically grounded scheme can underpin the calibration of resistance factors as a function of the degree of understanding – a concept already adopted in the Canadian Highway Bridge Design Code and being considered for the new draft for Eurocode 7 Part 1 (EN 1997-1:202x). The helical pile research in Chapter 7 was recognised by the 2020 ASCE Norman Medal.
Download or read book The Engineering of Foundations Slopes and Retaining Structures written by Rodrigo Salgado and published by CRC Press. This book was released on 2022-06-01 with total page 995 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineering of Foundations, Slopes and Retaining Structures rigorously covers the construction, analysis, and design of shallow and deep foundations, as well as retaining structures and slopes. It includes complete coverage of soil mechanics and site investigations. This new edition is a well-designed balance of theory and practice, emphasizing conceptual understanding and design applications. It contains illustrations, applications, and hands-on examples that continue across chapters. Soil mechanics is examined with full explanation of drained versus undrained loading, friction and dilatancy as sources of shear strength, phase transformation, development of peak effective stress ratios, and critical-state and residual shear strength. The design and execution of site investigations is evaluated with complete discussion of the CPT and SPT. Additional topics include the construction, settlement and bearing capacity of shallow foundations, as well as the installation, ultimate resistance and settlement of deep foundations. Both traditional knowledge and methods and approaches based on recent progress are available. Analysis and design of retaining structures and slopes, such as the use of slope stability software stability calculations, is included. The book is ideal for advanced undergraduate students, graduate students and practicing engineers and researchers.
Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-12-21 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stability of rock slopes is an important issue in both civil and mining engineering. On civil projects, rock cuts must be safe from rock falls and large-scale slope instability during both construction and operation. In open pit mining, where slope heights can be many hundreds of meters, the economics of the operation are closely related to the steepest stable slope angle that can be mined. This extensively updated version of the classic text, Rock Slope Engineering by Hoek and Bray, deals comprehensively with the investigation, design and operation of rock slopes. Investigation methods include the collection and interpretation of geological and groundwater data, and determination of rock strength properties, including the Hoek Brown rock mass strength criterion. Slope design methods include the theoretical basis for the design of plane, wedge, circular and toppling failures, and design charts are provided to enable rapid checks of stability to be carried out. New material contained in this book includes the latest developments in earthquake engineering related to slope stability, probabilistic analysis, numerical analysis, blasting, slope movement monitoring and stabilization methods. The types of stabilization include rock anchors, shotcrete, drainage and scaling, as well as rock fall protecting methods involving barriers, ditches, nets and sheds. Rock Slopes: Civil and Mining Engineering contains both worked examples illustrating data interpretation and design methods, and chapters on civil and mining case studies. The case studies demonstrate the application of design methods to the construction of stable slopes in a wide variety of geological conditions. The book provides over 300 carefully selected references for those who wish to study the subject in greater detail. It also includes an introduction by Dr. Evert Hoek.
Download or read book Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design written by Y. Honjo and published by CRC Press. This book was released on 2002-01-01 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions contained in these proceedings are divided into three main sections: theme lectures presented during the pre-workshop lecture series; keynote lectures and other contributed papers; and a translation of the Japanese geotechnical design code.
Download or read book Geotechnical Engineering in the XXI Century Lessons learned and future challenges written by N.P. López-Acosta and published by IOS Press. This book was released on 2019-11-26 with total page 3006 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Pan-American Conference on Soil Mechanics and Geotechnical Engineering (PCSMGE) was held in Mexico in 1959. Every 4 years since then, PCSMGE has brought together the geotechnical engineering community from all over the world to discuss the problems, solutions and future challenges facing this engineering sector. Sixty years after the first conference, the 2019 edition returns to Mexico. This book, Geotechnical Engineering in the XXI Century: Lessons learned and future challenges, presents the proceedings of the XVI Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XVI PCSMGE), held in Cancun, Mexico, from 17 – 20 November 2019. Of the 393 full papers submitted, 335 were accepted for publication after peer review. They are included here organized into 19 technical sessions, and cover a wide range of themes related to geotechnical engineering in the 21st century. Topics covered include: laboratory and in-situ testing; analytical and physical modeling in geotechnics; numerical modeling in geotechnics; unsaturated soils; soft soils; foundations and retaining structures; excavations and tunnels; offshore geotechnics; transportation in geotechnics; natural hazards; embankments and tailings dams; soils dynamics and earthquake engineering; ground improvement; sustainability and geo-environment; preservation of historic sites; forensics engineering; rock mechanics; education; and energy geotechnics. Providing a state-of-the-art overview of research into innovative and challenging applications in the field, the book will be of interest to all those working in soil mechanics and geotechnical engineering. In this proceedings, 58% of the contributions are in English, and 42% of the contributions are in Spanish or Portuguese.
Download or read book Geotechnical Engineering for Disaster Mitigation and Rehabilitation written by Han-Long Liu and published by Springer Science & Business Media. This book was released on 2009-02-18 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Geotechnical Engineering for Disaster Mitigation and Rehabilitation" presents the latest developments and case studies in the field. All contributions to this proceedings were rigorously reviewed to cover the newest developments in disasters related to earthquakes, landslides and slopes, soil dynamics, risk assessment and management, disaster mitigation and rehabilitation, and others. The book will be a useful reference for geotechnical scientists, engineers and professionals in these areas.
Download or read book Reliability of Geotechnical Structures in ISO2394 written by K.K. Phoon and published by CRC Press. This book was released on 2016-11-25 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest 4th edition of the international standard on the principles of reliability for load bearing structures (ISO2394:2015) includes a new Annex D dedicated to the reliability of geotechnical structures. The emphasis in Annex D is to identify and characterize critical elements of the geotechnical reliability-based design process. This book contains a wealth of data and information to assist geotechnical engineers with the implementation of semi-probabilistic or full probabilistic design approaches within the context of established geotechnical knowledge, principles, and experience. The introduction to the book presents an overview on how reliability can play a complementary role within prevailing norms in geotechnical practice to address situations where some measured data and/or past experience exist for limited site-specifi c data to be supplemented by both objective regional data and subjective judgment derived from comparable sites elsewhere. The principles of reliability as presented in ISO2394:2015 provides the common basis for harmonization of structural and geotechnical design. The balance of the chapters describes the uncertainty representation of geotechnical design parameters, the statistical characterization of multivariate geotechnical data and model factors, semi-probabilistic and direct probability-based design methods in accordance to the outline of Annex D. This book elaborates and reinforces the goal of Annex D to advance geotechnical reliability-based design with geotechnical needs at the forefront while complying with the general principles of reliability given by ISO2394:2015. It serves as a supplementary reference to Annex D and it is a must-read for designing geotechnical structures in compliance with ISO2394:2015.
Download or read book Cone Penetration Testing 2022 written by Guido Gottardi and published by CRC Press. This book was released on 2022-11-11 with total page 2784 pages. Available in PDF, EPUB and Kindle. Book excerpt: This abstracts volume (including full keynote and invited papers) contains the proceedings of the 5th International Symposium on Cone Penetration Testing (CPT’22), held in Bologna, Italy, 8-10 June 2022. More than 500 authors - academics, researchers, practitioners and manufacturers – contributed to the peer-reviewed papers included in this book, which includes three keynote lectures, four invited lectures and 169 technical papers. The contributions provide a full picture of the current knowledge and major trends in CPT research and development, with respect to innovations in instrumentation, latest advances in data interpretation, and emerging fields of CPT application. The paper topics encompass three well-established topic categories typically addressed in CPT events: - Equipment and Procedures - Data Interpretation - Applications. Emphasis is placed on the use of statistical approaches and innovative numerical strategies for CPT data interpretation, liquefaction studies, application of CPT to offshore engineering, comparative studies between CPT and other in-situ tests. Cone Penetration Testing 2022 contains a wealth of information that could be useful for researchers, practitioners and all those working in the broad and dynamic field of cone penetration testing.
Download or read book Proceedings written by and published by . This book was released on 1990 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability and Statistics in Geotechnical Engineering written by Gregory B. Baecher and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk and reliability analysis is an area of growing importance in geotechnical engineering, where many variables have to be considered. Statistics, reliability modeling and engineering judgement are employed together to develop risk and decision analyses for civil engineering systems. The resulting engineering models are used to make probabilistic predictions, which are applied to geotechnical problems. Reliability & Statistics in Geotechnical Engineering comprehensively covers the subject of risk and reliability in both practical and research terms * Includes extensive use of case studies * Presents topics not covered elsewhere--spatial variability and stochastic properties of geological materials * No comparable texts available Practicing engineers will find this an essential resource as will graduates in geotechnical engineering programmes.
Download or read book Transportation Research Record written by and published by . This book was released on 1996 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: "For more than 50 years, the Transportation Research Record has been internationally recognized as one of the preeminent peer-reviewed journals for transportation research papers from authors in the United States and from around the world. One of the most cited transportation journals, the TRR offers unparalleled depth and breadth in the coverage of transportation topics from both academic and practitioner perspectives. All modes of passenger and freight transportation are addressed in papers covering a wide array of disciplines, including policy, planning, administration, economics and financing, operations, construction, design, maintenance, safety, and more."--Publisher's website
Download or read book Risk Management for Geotechnical Engineering written by Duncan C. C. Wyllie and published by CRC Press. This book was released on 2023-11-24 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk Management for Geotechnical Engineering: Hazard, Risks and Consequences covers the application of risk management for soil and rock engineering projects, and the preparation of reliable designs that account for uncertainty. The book discusses qualitative risk assessments based on experience and judgement, as well as quantitative risk analysis using probabilistic methods and decision analysis to optimize designs. Many examples are included of how risk management can be applied to geotechnical engineering, with case studies presented for debris flows, rock falls, tunnel stability, and dam foundations. Also discussed are issues of liability insurance and contract law related to geotechnical engineering. This comprehensive book is ideal for practicing geotechnical engineers, addressing the challenges of making decisions in circumstances where uncertainties exist in site conditions, material properties and analysis methods.
Download or read book Load and Resistance Factor Design LRFD for Deep Foundations written by Samuel G. Paikowsky and published by Transportation Research Board. This book was released on 2004 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and research approach -- Findings -- Interpretation, appraisal, and applications -- Conclusions and suggested research -- Bibliography -- Appendixes.
Download or read book Proceedings of the International workshop on the Evaluation of Eurocode 7 written by International Workshop on the Evaluation of Eurocode 7 and published by . This book was released on 2005 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book LRFD Design and Construction of Shallow Foundations for Highway Bridge Structures written by and published by Transportation Research Board. This book was released on 2010 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report develops and calibrates procedures and modifies the AASHTO LRFD Bridge Design Specifications, Section 10-Foundations for the Strength Limit State Design of Shallow Foundations. The material in this report will be of immediate interest to bridge engineers and geotechnical engineers involved in the design of shallow foundations.
Download or read book Handbook of International Bridge Engineering written by Wai-Fah Chen and published by CRC Press. This book was released on 2013-10-11 with total page 1413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and up-to-date reference work and resource book covers state-of-the-art and state-of-the-practice for bridge engineering worldwide. Countries covered include Canada and the United States in North America; Argentina and Brazil in South America; Bosnia, Bulgaria, Croatia, Czech Republic, Denmark, Finland, France, Greece, Macedonia, Poland, Russia, Serbia, Slovakia, and Ukraine in the European continent; China, Indonesia, Japan, Chinese Taipei, and Thailand in Asia; and Egypt, Iran, and Turkey in the Middle East. The book examines the use of different materials for each region, including stone, timber, concrete, steel, and composite. It examines various bridge types, including slab, girder, segmental, truss, arch, suspension, and cable-stayed. A color insert illustrates select landmark bridges. It also presents ten benchmark comparisons for highway composite girder design from different countries; the highest bridges; the top 100 longest bridges, and the top 20 longest bridge spans for various bridge types including suspension, cable-stayed, extradosed, arch, girder, movable bridges (vertical lift, swing, and bascule), floating, stress ribbon, and timber; and bridge construction methods.
Download or read book Modern Geotechnical Design Codes of Practice written by Patrick Arnold and published by IOS Press. This book was released on 2013 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods site understanding and to safety levels acceptable to society, will therefore vary between different regions.The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering
