Download or read book Development of Annual Daylight Performance Metrics written by Amir Nezamdoost and published by . This book was released on 2015 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the latest published version LEED (v4), and the IES codifying two recommended annual-climate-based daylighting metrics and performance criteria, annual daylighting simulation has become even more important to the design professions than ever before. However, interpretation and application of annual-climate-based daylighting data are still relatively novel. Moreover, there remains a lack of consensus regarding the proper behavioral patterns that annual-climate-based daylighting simulation should employ regarding operation of interior manually-controlled window blinds. This study documents a 8-year human factors daylighting field research project using students' daylit area drawings and qualitative assessments of daylight sufficiency and corresponding point-in-time and annual-climate-based daylighting simulation in a variety of building types (n=24) in order to provide insight to the building performance simulation community about application of these new annual daylighting metrics.
Download or read book Annual Dynamics of Daylight Variability and Contrast written by Siobhan Rockcastle and published by Springer Science & Business Media. This book was released on 2013-06-25 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Daylight is a dynamic source of illumination in architectural space, creating diverse and ephemeral configurations of light and shadow within the built environment. Perceptual qualities of daylight, such as contrast and temporal variability, are essential to our understanding of both material and visual effects in architecture. Although spatial contrast and light variability are fundamental to the visual experience of architecture, architects still rely primarily on intuition to evaluate their designs because there are few metrics that address these factors. Through an analysis of contemporary architecture, this work develops a new typological language that categorizes architectural space in terms of contrast and temporal variation. This research proposes a new family of metrics that quantify the magnitude of contrast-based visual effects and time-based variation within daylit space through the use of time-segmented daylight renderings to provide a more holistic analysis of daylight performance.
Download or read book Daylighting Architecture and Health written by Mohamed Boubekri and published by Routledge. This book was released on 2008 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential read for all whose work impinges on daylighting practice, this book examines research into daylighting and health, and its implications for architecture and building design.
Download or read book Building Performance Simulation for Design and Operation written by Jan L.M. Hensen and published by Routledge. This book was released on 2019-04-24 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: When used appropriately, building performance simulation has the potential to reduce the environmental impact of the built environment, to improve indoor quality and productivity, as well as to facilitate future innovation and technological progress in construction. Since publication of the first edition of Building Performance Simulation for Design and Operation, the discussion has shifted from a focus on software features to a new agenda, which centres on the effectiveness of building performance simulation in building life cycle processes. This new edition provides a unique and comprehensive overview of building performance simulation for the complete building life cycle from conception to demolition, and from a single building to district level. It contains new chapters on building information modelling, occupant behaviour modelling, urban physics modelling, urban building energy modelling and renewable energy systems modelling. This new edition keeps the same chapter structure throughout including learning objectives, chapter summaries and assignments. Moreover, the book: • Provides unique insights into the techniques of building performance modelling and simulation and their application to performance-based design and operation of buildings and the systems which service them. • Provides readers with the essential concepts of computational support of performance-based design and operation. • Provides examples of how to use building simulation techniques for practical design, management and operation, their limitations and future direction. It is primarily intended for building and systems designers and operators, and postgraduate architectural, environmental or mechanical engineering students.
Download or read book Daylight Metrics PIER Daylighting Plus Research Program written by and published by . This book was released on 2012 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rendering with Radiance written by Greg Ward Larson and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Artificial Intelligence in Performance Driven Design written by Narjes Abbasabadi and published by John Wiley & Sons. This book was released on 2024-05-29 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: ARTIFICIAL INTELLIGENCE IN PERFORMANCE-DRIVEN DESIGN A definitive, interdisciplinary reference to using artificial intelligence technology and data-driven methodologies for sustainable design Artificial Intelligence in Performance-Driven Design: Theories, Methods, and Tools explores the application of artificial intelligence (AI), specifically machine learning (ML), for performance modeling within the built environment. This work develops the theoretical foundations and methodological frameworks for utilizing AI/ML, with an emphasis on multi-scale modeling encompassing energy flows, environmental quality, and human systems. The book examines relevant practices, case studies, and computational tools that harness AI’s capabilities in modeling frameworks, enhancing the efficiency, accuracy, and integration of physics-based simulation, optimization, and automation processes. Furthermore, it highlights the integration of intelligent systems and digital twins throughout the lifecycle of the built environment, to enhance our understanding and management of these complex environments. This book also: Incorporates emerging technologies into practical ideas to improve performance analysis and sustainable design Presents data-driven methodologies and technologies that integrate into modeling and design platforms Shares valuable insights and tools for developing decarbonization pathways in urban buildings Includes contributions from expert researchers and educators across a range of related fields Artificial Intelligence in Performance-Driven Design is ideal for architects, engineers, planners, and researchers involved in sustainable design and the built environment. It’s also of interest to students of architecture, building science and technology, urban design and planning, environmental engineering, and computer science and engineering.
Download or read book Effective Daylighting with High Performance Facades written by Kyle Konis and published by Springer. This book was released on 2017-05-09 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores advanced building-facade daylighting design practices based on diverse energy and human-factor performance metrics. It also defines effective daylighting by rethinking the simplified approach to glazing and facade systems to incorporate the local climate and the needs of building occupants as critical drivers of building performance, design solutions and technological innovation. It discusses state-of-the-art approaches in the context of simulation-based design workflows, innovative technologies and real project case studies, all targeting low and net-zero energy solutions that enhance occupant comfort. Readers benefit from a comprehensive approach that improves the feedback loop between design intent and performance in use. The book is intended for architects, lighting designers, facade engineers, manufacturers and building owners/operators, as well as advanced students.
Download or read book Daylighting written by Peter Tregenza and published by Routledge. This book was released on 2013-01-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative and multi-disciplinary book provides architects, lighting specialists, and anyone else working daylight into design, with all the tools needed to incorporate this most fundamental element of architecture. It includes: an overview of current practice of daylighting in architecture and urban planning a review of recent research on daylighting and what this means to the practitioner a global vision of architectural lighting which is linked to the climates of the world and which integrates view, sunlight, diffuse skylight and electric lighting up-to-date tools for design in practice delivery of information in a variety of ways for interdisciplinary readers: graphics, mathematics, text, photographs and in-depth illustrations a clear structure: eleven chapters covering different aspects of lighting, a set of worksheets giving step-by-step examples of calculations and design procedures for use in practice, and a collection of algorithms and equations for reference by specialists and software designers. This book should trigger creative thought. It recognizes that good lighting design needs both knowledge and imagination.
Download or read book Comprehensive Performance Metrics for Complex Fenestration Systems Using a Relative Approach written by Shreya H. Dave and published by . This book was released on 2012 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Buildings account for over 40% of the energy consumption in the United States, nearly 40% of which is attributed to lighting. The selection of a fenestration system for a building is a critical decision as it offsets electric lighting use as well as impacts energy performance through heating and cooling systems. Further, the fenestration system contributes to both occupant comfort and ambiance of the space. Complex Fenestration Systems (CFS) address these factors with a variety of innovative technologies but the language to describe, discuss, and compare them does not exist. Existing traditional metrics for fenestration systems are unable to reveal the benefits that characterize complex fenestration systems because they are rigid, do not reflect annual performance, and were developed for a different purpose. The framework presented in this research offers a solution to this problem by using an annual climate-based methodology to provide a comprehensive evaluation of a system by incorporating three of the most relevant performance aspects: energy efficiency, occupant visual comfort, and ability to view through. Three metrics, the Relative Energy Impact (REI), the Extent of Comfortable Daylight (ECD), and the View Through Potential (VTP), were derived from these three criteria to express, in relative terms, a fagade's contribution to building energy use, comfortable daylight conditions, and the degree of transparency, respectively. Several practical matters were considered when developing a policy-relevant set of metrics, including both ease of calculation for manufacturers and usability for consumers. As such, the calculation methodology evolved from its initial proposal into a simplified approach, analytical where possible, and into a label-like concept for visual representation. These metrics are intended to exist as a mechanism by which manufacturers can evaluate and compare facade systems, provide high-level intuition of relative performance for designers and contractors, and enable the balance of performance objectives based on user preference. Ultimately, the creation of this comprehensive language is intended to stimulate innovation in fenestration systems and encourage their use in both new and retrofit building applications.
Download or read book Architecture Sustainable Development vol 1 written by Magali Bodart and published by Presses univ. de Louvain. This book was released on 2011-07 with total page 917 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of Proceedings presents the latest thinking and research in the rapidly evolving world of architecture and sustainable development through 255 selected papers by authors coming from over 60 countries.
Download or read book Daylighting and Integrated Lighting Design written by Christopher Meek and published by Routledge. This book was released on 2014-10-17 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Daylighting and Integrated Lighting Design provides architects, building designers, and students clear direction for the successful inclusion of daylight and integrated electric light in buildings. It presents design teams with the performance analysis resources, energy saving estimates and user satisfaction results they need in order to make informed decisions regarding daylighting and lighting design. Written by two well-known experts in the field, the book provides: critical geometric and material relationships along with proven design process activities, offered in a quick-reference format, with sufficient context to address the range of associated issues present in any building project both the "fundamentals" and "applications" which cover design concepts and practice activities applicable to all integrated lighting projects specific directives for how the concepts covered are applied in a range of common design scenarios, including architectural rules-of-thumb, instructions for ensuring visual comfort, and preferred approaches for electric lighting control integration. In demonstrating these necessary insights to designers, the authors employ an iterative analysis of common "daylighting patterns" and illustrate and annotate both successful and unsuccessful examples via built form and simulation. Part of the PocketArchitecture series, this is the ideal pocketbook for any designer serious about reducing the energy impact of their buildings.
Download or read book Flexible Automation and Intelligent Manufacturing Establishing Bridges for More Sustainable Manufacturing Systems written by Francisco J. G. Silva and published by Springer Nature. This book was released on 2023-08-23 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation and sustainability. Topics cover manufacturing process optimization, remanufacturing, machines and mechanical design, CAD/CAM/CAE, materials characterization and processing, measurement and predictive maintenance techniques. Further topics include artificial intelligence and IoT in manufacturing, robotics, and cutting-edge issues in Industry 4.0/5.0. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18 – 22, 2023, in Porto, Portugal, this first volume of a 2-volume set provides academics and professionals with extensive, technical information on trends and technologies in manufacturing, yet it also discusses challenges and practice-oriented experience in all the above-mentioned areas.
Download or read book Visual Delight in Architecture written by Lisa Heschong and published by Routledge. This book was released on 2021-03-11 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visual Delight in Architecture examines the many ways that our lives are enriched by the presence of natural daylight and window views within our buildings. It makes a compelling case that daily exposure to the rhythms of daylight is essential to our health and well-being, tied to the very genetic foundations of our physiology and cognitive function. It describes all the subtlety, beauty, and pleasures of well-daylit spaces and attractive window views, and explains how these are woven into the fabric of both our everyday sensory experience and enduring cultural perspectives. All types of environmental designers, along with anyone interested in human health and well- being, will fi nd new insights offered by Visual Delight in Architecture. The book is both accessible and provocative, full of personal stories and persuasive research, helping designers to gain a deeper understanding of the scientific basis of their designs, scientists to better grasp the real-world implications of their work, and everyone to more fully appreciate the role of windows in their lives.
Download or read book Construction 4 0 written by Marco Casini and published by Woodhead Publishing. This book was released on 2021-11-24 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in data acquisition technologies, digital information and analysis, automated construction processes, and advanced materials and products have finally started to move the construction industry - traditionally reluctant to innovation and slow in adopting new technologies - toward a new era. Massive changes are occurring because of the possibilities created by Building information modeling, Extended reality, Internet of Things, Artificial intelligence and Machine Learning, Big data, Nanotechnology, 3D printing, and other advanced technologies, which are strongly interconnected and are driving the capabilities for much more efficient construction at scale. Construction 4.0: Advanced Technology, Tools and Materials for the Digital Transformation of the Construction Industry provides readers with a state-of-the-art review of the ongoing digital transformation of the sector within the new 4.0 framework, presenting a thorough investigation of the emerging trends, technologies, and strategies in the fields of smart building design, construction, and operation and providing a comprehensive guideline on how to exploit the new possibilities offered by the digital revolution. It will be an essential reference resource for academic researchers, material scientists and civil engineers, undergraduate and graduate students, and other professionals working in the field of smart ecoefficient construction and cutting-edge technologies applied to construction. - Provides an overview of the Construction 4.0 framework to address the global challenges of the buildingsector in the 21st century and an in-depth analysis of the most advanced digital technologies and systems forthe operation and maintenance of infrastructure, real estate, and other built assets - Covers major innovations across the value chain, including building design, fabrication, construction, operationand maintenance, and end-of-life - Illustrates the most advanced digital tools and methods to support the building design activity, includinggenerative design, virtual reality, and digital fabrication - Presents a thorough review of the most advanced construction materials, building methods, and techniquesfor a new connected and automated construction model - Explores the digital transformation for smart energy buildings and their integration with emerging smartgrids and smart cities - Reflects upon major findings and identifies emerging market opportunities for the whole AECO sector
Download or read book Building Performance Simulation for Design and Operation written by Jan L.M. Hensen and published by Routledge. This book was released on 2012-09-10 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective building performance simulation can reduce the environmental impact of the built environment, improve indoor quality and productivity, and facilitate future innovation and technological progress in construction. It draws on many disciplines, including physics, mathematics, material science, biophysics and human behavioural, environmental and computational sciences. The discipline itself is continuously evolving and maturing, and improvements in model robustness and fidelity are constantly being made. This has sparked a new agenda focusing on the effectiveness of simulation in building life-cycle processes. Building Performance Simulation for Design and Operation begins with an introduction to the concepts of performance indicators and targets, followed by a discussion on the role of building simulation in performance-based building design and operation. This sets the ground for in-depth discussion of performance prediction for energy demand, indoor environmental quality (including thermal, visual, indoor air quality and moisture phenomena), HVAC and renewable system performance, urban level modelling, building operational optimization and automation. Produced in cooperation with the International Building Performance Simulation Association (IBPSA), and featuring contributions from fourteen internationally recognised experts in this field, this book provides a unique and comprehensive overview of building performance simulation for the complete building life-cycle from conception to demolition. It is primarily intended for advanced students in building services engineering, and in architectural, environmental or mechanical engineering; and will be useful for building and systems designers and operators.
Download or read book Advanced water splitting technologies development Best practices and protocols written by Ellen B. Stechel and published by Frontiers Media SA. This book was released on 2023-04-04 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt:
