Download or read book Development of an Integrated Computer Controlled High Speed Data Acquisition and Potentiostat System written by Thomas Heinrich Nadermann and published by . This book was released on 1989 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Development of a Computer Controlled Data Acquisition System written by Robert Herman Lusk and published by . This book was released on 1973 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development of a High speed Data Acquisition System and Its Interface with a Personal Computer written by Gregory Millington Jones and published by . This book was released on 2001 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Data Acquisition Techniques Using PCs written by Howard Austerlitz and published by Academic Press. This book was released on 2002-12-04 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this highly successful text focuses on the major changes that have taken place in this field in recent times. Data Acquisition Techniques Using PCs, Second Edition, recognises that data acquisition is the core of most engineering and many life science systems in measurement and instrumentation. It will prove invaluable to scientists, engineers, students and technicians wishing to keep up with the latest technological developments. - Teaches the reader how to set up a PC-based system that measures, analyzes, and controls experiments and processes through detailed design examples - Geared for beginning and advanced users, with many tutorials for less experienced readers, and detailed standards references for more experienced readers - Fully revised new edition discusses latest programming languages and includes a list of over 80 product manufacurers to save valuable time

Download or read book DEVELOPMENT OF A SMALL DATA ACQUISITION AND CONTROL COMPUTER SYSTEM written by and published by . This book was released on 1972 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Computer Controlled Data Acquisition System written by Joseph Wayne Beyers and published by . This book was released on 1975 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CAPTAN written by and published by . This book was released on 2008 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electronic Systems Engineering Department of the Computing Division at the Fermi National Accelerator Laboratory has developed a data acquisition system flexible and powerful enough to meet the needs of a variety of high energy physics applications. The system described in this paper is called CAPTAN (Compact And Programmable daTa Acquisition Node) and its architecture and capabilities are presented in detail here. The three most important characteristics of this system are flexibility, versatility and scalability. These three main features are supported by key architectural features; a vertical bus that permits the user to stack multiple boards, a gigabit Ethernet link that permits high speed communications to the system and the core group of boards that provide specific capabilities for the system. In this paper, we describe the system architecture, give an overview of its capabilities and point out possible applications.

Download or read book Study and Implementation of Data Acquisition Tools in an Industrial Automation System written by Anshul Saxena and published by . This book was released on 2007 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: As global price competition intensifies and complexity of the product increases, machine processes push the physical and operational limits of the system manufacturers. The most important result is increasingly narrow tolerances for the parameters controlling the machine process. In the present study the various parameters of a deposition machine such as flow rate, gas pressures, RF voltage etc. are controlled and regulated with narrow tolerances using a software tool and a high resolution data acquisition board (DAQ). A comparative study is made of two of the most widely-used data acquisition software tools in the industry, Matlab and LabView. A qualitative analysis is performed, and it is found that LabView is better suited towards the case in point, due to its higher flexibility, better driver support and wide-ranging I/O capabilities. To accomplish the objectives a user interface and a block diagram for each parameter is developed in LabView using NI-DAQmx programming. DAQ board is used to make the analog interface between the instruments and the personal computer. The acquired data can be seen in real time in LabView for instant calibration. Simulations for controlling and regulating all the parameters using LabView were performed to account for any discrepancies in the automation of the machine. Using TDMS File Viewer and Microsoft Excel, a database was created to load the real time data for export into graphs for later comparison. Modular development style also allows future improvements and advancements as one can easily remove or substitute industry systems in LabView. It was found that automation of an industrial machine with sophisticated data acquisition and control process can be accomplished using low cost Personal Computer (PC). Also, the system integration and software development are greatly simplified, and the total cost can be reduced. In addition, interfacing the software with the database for storage, recall of all the machine configuration parameters, and measurement results helps the user to search and sort the resulting database files in highly flexible and customizable data management architecture. The motivation of the study came from the need to develop an automated machine which can be controlled, regulated and able to store the data for later purposes. Display of real time data from the parameters also helps user to visualize the data flow of each parameter separately.

Download or read book Development and Application of a High speed High resolution Data Acquisition System for Monitoring Power at the Service Entrance to Buildings written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Computer controlled Central Digital Data Acquisition System written by Charles Mealey and published by . This book was released on 1967 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Development and Application of a Data Acquisition Control System written by Lei Ji and published by . This book was released on 1992 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thomas Register of American Manufacturers and Thomas Register Catalog File written by and published by . This book was released on 1997 with total page 2124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1970-71 includes manufacturers catalogs.

Download or read book Trade Catalogs on Custom designed Digital Data Acquisition Systems Multi point Temperature Logging and Control System Automatic Data Recording System High speed Data Recording System Sequence of Events Recorder Integrating Digital Data Printout System Three axis Coordinate Digitizing System Analog Data Preparation Unit and A D Recording System Digital Desk top Computers and Electronic Calculators Counters Digital Clocks Block Tape Readers Digital Encoders and Logarithmic Computing Instruments written by Wang Laboratories, Inc and published by . This book was released on 1966* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Speed Data Acquisition System written by Mack Taylor Elliott and published by . This book was released on 1978 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the expansion and modification of an existing data acquisition system to effect extensive improvements in speed and flexibility. A microprocessor, flexible disk drive, analog to digital converter, direct memory access module, and high-speed line printer were integrated and interfaced to an IBM 360 digital computer with a high-speed data transmission line. The resultant system provided the capability of digitizing up to sixteen analog inputs simultaneously at rates in excess of 45,000 samples per second. The experimental data could be transmitted expeditiously to the IBM 360 computer for efficient manipulation. Additional benefits gained from the system were its capabilities as a remote terminal for the IBM 360 and a typewriter-quality word processor. The data acquisition and reduction system was qualified for functional performance and speed through a series of test exercises. The word processor was demonstrated in the production of this document. (Author).

Download or read book Analog and Digital Hardware Development for a Microcomputer Controlled Data Acquisition System for Acoustical Imaging written by Reid Owen Carlock and published by . This book was released on 1979 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the design and testing of a microcomputer controlled data acquisition system for an acoustical imaging system. Analog sinusoidal signals are processed through a 256 channel analog multiplexer to high speed phase and amplitude detection channels. Analog to digital conversion is accomplished with a microputer peripheral module. Data storage then follows in a 64k byte peripheral memory. Interface with a cassette tape recording system is accomplished for data transferral. (Author).

Download or read book Computer Based Data Acquisition Systems written by James L. Taylor and published by . This book was released on 1990-01-01 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: