Download or read book Development of an ASTM Standard Glass Durability Test the Product Consistency Test PCT for High Level Radioactive Waste Glass written by and published by . This book was released on 1994 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nation's first, and the world's largest, facility to immobilize high-level nuclear waste in durable borosilicate glass has started operation at the Savannah River Site (SRS) in Aiken, South Carolina. The product specifications on the glass wasteform produced in the Defense Waste Processing Facility (DWPF) required extensive characterization of the glass product before actual production began and for continued characterization during production. To aid in this characterization, a glass durability (leach) test was needed that was easily reproducible, could be performed remotely on highly radioactive samples, and could yield results rapidly. Several standard leach tests were examined with a variety of test configurations. Using existing tests as a starting point, the DWPF Product Consistency Test (PCT was developed in which crushed glass samples are exposed to 90 " 2°C deionized water for seven days. Based on extensive testing, including a seven-laboratory round robin and confirmatory testing with radioactive samples, the PCT is very reproducible, yields reliable results rapidly, and can be performed in shielded cell facilities with radioactive samples.

Download or read book The Product Consistency Test How and Why IT Was Developed written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Product Consistency Test (PCT), American Society for Testing Materials (ASTM) Standard C1285, is currently used world wide for testing glass and glass-ceramic waste forms for high level waste (HLW), low level waste (LLW), and hazardous wastes. Development of the PCT was initiated in 1986 because HLW glass waste forms required extensive characterization before actual production began and required continued characterization during production (≥25 years). Non-radioactive startup was in 1994 and radioactive startup was in 1996. The PCT underwent extensive development from 1986-1994 and became an ASTM consensus standard in 1994. During the extensive laboratory testing and inter- and intra-laboratory round robins using non-radioactive and radioactive glasses, the PCT was shown to be very reproducible, to yield reliable results rapidly, to distinguish between glasses of different durability and homogeneity, and to easily be performed in shielded cell facilities with radioactive samples. In 1997, the scope was broadened to include hazardous and mixed (radioactive and hazardous) waste glasses. In 2002, the scope was broadened to include glass-ceramic waste forms which are currently being recommended for second generation nuclear wastes yet to be generated in the nuclear renaissance. Since the PCT has proven useful for glass-ceramics with up to 75% ceramic component and has been used to evaluate Pu ceramic waste forms, the use of this test for other ceramic/mineral waste forms such as geopolymers, hydroceramics, and fluidized bed steam reformer mineralized product is under investigation.

Download or read book Nuclear Waste Glass Product Consistency Test PCT Version 3 0 written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Preliminary Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Product Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radioactive Waste Management and Contaminated Site Clean Up written by William E Lee and published by Elsevier. This book was released on 2013-10-31 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radioactive waste management and contaminated site clean-up reviews radioactive waste management processes, technologies, and international experiences. Part one explores the fundamentals of radioactive waste including sources, characterisation, and processing strategies. International safety standards, risk assessment of radioactive wastes and remediation of contaminated sites and irradiated nuclear fuel management are also reviewed. Part two highlights the current international situation across Africa, Asia, Europe, and North America. The experience in Japan, with a specific chapter on Fukushima, is also covered. Finally, part three explores the clean-up of sites contaminated by weapons programmes including the USA and former USSR. Radioactive waste management and contaminated site clean-up is a comprehensive resource for professionals, researchers, scientists and academics in radioactive waste management, governmental and other regulatory bodies and the nuclear power industry. Explores the fundamentals of radioactive waste including sources, characterisation, and processing strategies Reviews international safety standards, risk assessment of radioactive wastes and remediation of contaminated sites and irradiated nuclear fuel management Highlights the current international situation across Africa, Asia, Europe, and North America specifically including a chapter on the experience in Fukushima, Japan

Download or read book Nuclear Waste Glass Product Consistency Test PCT Version 5 0 written by and published by . This book was released on 1992 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Preliminary Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Produce Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples. Version 5.0 of the PCT procedure is attached.

Download or read book Nuclear Waste Glass Product Consistency Test PCT written by and published by . This book was released on 1994 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Product Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Product Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples. Version 7.0 of the PCT procedure is attached. This draft version has been submitted to ASTM for full committee (C26, Nuclear Fuel Cycle) ballot after being balloted successfully through subcommittee C26.13 on Repository Waste Package Materials Testing.

Download or read book Waste Forms Technology and Performance written by National Research Council and published by National Academies Press. This book was released on 2011-09-05 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Energy's Office of Environmental Management (DOE-EM) is responsible for cleaning up radioactive waste and environmental contamination resulting from five decades of nuclear weapons production and testing. A major focus of this program involves the retrieval, processing, and immobilization of waste into stable, solid waste forms for disposal. Waste Forms Technology and Performance, a report requested by DOE-EM, examines requirements for waste form technology and performance in the cleanup program. The report provides information to DOE-EM to support improvements in methods for processing waste and selecting and fabricating waste forms. Waste Forms Technology and Performance places particular emphasis on processing technologies for high-level radioactive waste, DOE's most expensive and arguably most difficult cleanup challenge. The report's key messages are presented in ten findings and one recommendation.

Download or read book Nuclear Waste Glass Product Consistency Test PCT Version 5 0 Revision 2 written by and published by . This book was released on 1992 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid high-level nuclear waste will be immobilized at the Savannah River Site (SRS) by vitrification in borosilicate glass. The glass will be produced in the Defense Waste Processing Facility (DWPF), poured into stainless steel canisters, and eventually disposed of in a geologic repository. In order to comply with the Waste Acceptance Preliminary Specifications (WAPS), the durability of the glass needs to be measured during production to assure its long term stability and radionuclide release properties. A durability test, designated the Produce Consistency Test (PCT), was developed for DWPF glass in order to meet the WAPS requirements. The response of the PCT procedure was based on extensive testing with glasses of widely different compositions. The PCT was determined to be very reproducible, to yield reliable results rapidly, and to be easily performed in shielded cell facilities with radioactive samples. Version 5.0 of the PCT procedure is attached.

Download or read book Radioactive Waste Management written by and published by . This book was released on 1981 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Waste Glass Product Consistence Test PCT Version 3 0 written by C. M. Jantzen and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Remediation of Legacy Hazardous and Nuclear Industrial Sites written by Stuart T. Arm and published by CRC Press. This book was released on 2024-09-12 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remediation of Legacy Hazardous and Nuclear Industrial Sites provides an overview of the key elements involved in remediating complex waste sites using the Hanford nuclear site as a case study. Hanford is one of the most complex waste sites in the world and has examples of most, if not all, characteristics of the complex waste sites that exist globally. This book is aimed at a non-technical audience and describes the stages of remediation based on general RCRA/CERCLA processes, from establishing a strategy that includes all stakeholders to site assessment, waste treatment and disposal, and long-term monitoring. Features: Informs a non-technical audience of the important elements involved in complex waste site remediation Employs the Hanford Site as a case study throughout to explain real-world applications of remediation steps Connects the “human” element to the technical aspects through interviews with key current and retired individuals at the Hanford Site Includes discussion of stakeholders and the engagement process in remediation Demonstrates how all elements of complex waste site remediation from demolition of buildings to groundwater management are interrelated Focuses on broader technical and sociopolitical challenges for remediation of a contaminated site Aimed at a broad audience, this book offers approachable guidance to technical and non-technical readers through a series of real-world examples that cover each important step in the complex waste cleanup process.

Download or read book Performing a Chemical Durability Test on Radioactive High level Nuclear Waste Glass written by and published by . This book was released on 1990 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Savannah River Site (SRS), currently is storing (approximately)30 million gallons of highly radioactive nuclear wastes. The Defense Waste Processing Facility (DWPF) nearing completion at SRS will incorporate the radionuclides in these wastes into solid borosilicate glass for final disposal in a geologic repository. Because of the variability of the wastes in the tanks, borosilicate glasses of different compositions will be produced by the DWPF during the 20--25 years required to solidify all the wastes at SRS. A chemical durability test, the Product Consistency Test (PCT), has been developed at SRS to measure the consistency of the durability of these glasses. This paper describes the remote and hands-on procedures for performing the PCT on these radioactive glasses. Results will be presented that indicate the good precision of the PCT and indicate some of the chemistry involved in leaching radioactive elements from the glass. 9 refs., 1 fig., 4 tabs.

Download or read book Standard Test Methods for Determining Chemical Durability of Nuclear Hazardous and Mixed Waste Glasses and Multiphase Glass Ceramics written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries XI written by Connie C. Herman and published by John Wiley & Sons. This book was released on 2012-04-11 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains papers presented at the Ceramic/Glass Science and Technology for Nuclear and Environmental Industries symposium. Topics include nuclear and environmental technology applications in the ceramic industry; nuclear waste forms and fuels processing and technology - ceramic forms; nuclear waste forms processing and technology - steam reforming; panel discussion on nuclear waste forms durability, testing, and disposal status; nuclear waste forms and fuels processing and technology - glass forms; and advances in nuclear waste form testing and characterization methods.

Download or read book Advances in Glass and Glass Ceramics written by Atiar R. Molla and published by Springer Nature. This book was released on with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Advanced Radioactive Waste Conditioning Technologies written by Michael I. Ojovan and published by Elsevier. This book was released on 2011-01-24 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radioactive wastes are generated from a wide range of sources, including the power industry, and medical and scientific research institutions, presenting a range of challenges in dealing with a diverse set of radionuclides of varying concentrations. Conditioning technologies are essential for the encapsulation and immobilisation of these radioactive wastes, forming the initial engineered barrier required for their transportation, storage and disposal. The need to ensure the long term performance of radioactive waste forms is a key driver of the development of advanced conditioning technologies. The Handbook of advanced radioactive waste conditioning technologies provides a comprehensive and systematic reference on the various options available and under development for the treatment and immobilisation of radioactive wastes. The book opens with an introductory chapter on radioactive waste characterisation and selection of conditioning technologies. Part one reviews the main radioactive waste treatment processes and conditioning technologies, including volume reduction techniques such as compaction, incineration and plasma treatment, as well as encapsulation methods such as cementation, calcination and vitrification. This coverage is extended in part two, with in-depth reviews of the development of advanced materials for radioactive waste conditioning, including geopolymers, glass and ceramic matrices for nuclear waste immobilisation, and waste packages and containers for disposal. Finally, part three reviews the long-term performance assessment and knowledge management techniques applicable to both spent nuclear fuels and solid radioactive waste forms. With its distinguished international team of contributors, the Handbook of advanced radioactive waste conditioning technologies is a standard reference for all radioactive waste management professionals, radiochemists, academics and researchers involved in the development of the nuclear fuel cycle. Provides a comprehensive and systematic reference on the various options available and under development for the treatment and immobilisation of radioactive wastes Explores radioactive waste characterisation and selection of conditioning technologies including the development of advanced materials for radioactive waste conditioning Assesses the main radioactive waste treatment processes and conditioning technologies, including volume reduction techniques such as compaction