Download or read book Development of a Numerical Model for High Temperature Shape Memory Alloys written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-27 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thermomechanical hysteresis model for a high-temperature shape memory alloy (HTSMA) actuator material is presented. The model is capable of predicting strain output of a tensile-loaded HTSMA when excited by arbitrary temperature-stress inputs for the purpose of actuator and controls design. Common quasi-static generalized Preisach hysteresis models available in the literature require large sets of experimental data for model identification at a particular operating point, and substantially more data for multiple operating points. The novel algorithm introduced here proposes an alternate approach to Preisach methods that is better suited for research-stage alloys, such as recently-developed HTSMAs, for which a complete database is not yet available. A detailed description of the minor loop hysteresis model is presented in this paper, as well as a methodology for determination of model parameters. The model is then qualitatively evaluated with respect to well-established Preisach properties and against a set of low-temperature cycled loading data using a modified form of the one-dimensional Brinson constitutive equation. The computationally efficient algorithm demonstrates adherence to Preisach properties and excellent agreement to the validation data set. DeCastro, Jonathan A. and Melcher, Kevin J. and Noebe, Ronald D. and Gaydosh, Darrell J. Glenn Research Center NASA/TM-2006-214356, E-15631

Download or read book Shape Memory Alloy Engineering written by Antonio Concilio and published by Elsevier. This book was released on 2014-09-25 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloy Engineering introduces materials, mechanical, and aerospace engineers to shape memory alloys (SMAs), providing a unique perspective that combines fundamental theory with new approaches to design and modeling of actual SMAs as compact and inexpensive actuators for use in aerospace and other applications. With this book readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams, allowing them to design innovative compact actuation systems for applications from aerospace and aeronautics to ships, cars, and trucks. The book realistically discusses both the potential of these fascinating materials as well as their limitations in everyday life, and how to overcome some of those limitations in order to achieve proper design of useful SMA mechanisms. Discusses material characterization processes and results for a number of newer SMAs Incorporates numerical (FE) simulation and integration procedures into commercial codes (Msc/Nastran, Abaqus, and others) Provides detailed examples on design procedures and optimization of SMA-based actuation systems for real cases, from specs to verification lab tests on physical demonstrators One of the few SMA books to include design and set-up of demonstrator characterization tests and correlation with numerical models

Download or read book Engineering Aspects of Shape Memory Alloys written by T W Duerig and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Aspects of Shape Memory Alloys provides an understanding of shape memory by defining terms, properties, and applications. It includes tutorials, overviews, and specific design examples—all written with the intention of minimizing the science and maximizing the engineering aspects. Although the individual chapters have been written by many different authors, each one of the best in their fields, the overall tone and intent of the book is not that of a proceedings, but that of a textbook. The book consists of five parts. Part I deals with the mechanism of shape memory and the alloys that exhibit the effect. It also defines many essential terms that will be used in later parts. Part II deals primarily with constrained recovery, but to some extent with free recovery. There is an introductory paper which defines terms and principles, then several specific examples of products based on constrained recovery. Both Parts III and IV deal with actuators. Part III introduces engineering principles while Part IV presents several of the specific examples. Finally, Part V deals with superelasticity, with an introductory paper and then several specific examples of product engineering.

Download or read book Shape Memory Alloys written by M. Fremond and published by Springer. This book was released on 2014-05-04 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of two chapters. The first chapter deals with the thermomechanical macroscopic theory describing the transformation and deformation behavior of shape memory alloys. The second chapter deals with the extensive and fundamental review of the experimental works which include crystallography, transformations and mechanical characteristics in Ti-Ni, Cu-base and ferrous shape memory alloys.

Download or read book Advanced Materials XVI written by Muhammad Muneeb Asim and published by Trans Tech Publications Ltd. This book was released on 2021-02-04 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text research papers from the 16th International Symposium on Advanced Materials (16th ISAM) Selected, peer-reviewed papers from the 16th International Symposium on Advanced Materials (ISAM), October 21-25, 2019, Islamabad, Pakistan

Download or read book Smart Structures Theory written by Inderjit Chopra and published by Cambridge University Press. This book was released on 2014 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on smart materials and structures, which are also referred to as intelligent, adaptive, active, sensory, and metamorphic. The ultimate goal is to develop biologically inspired multifunctional materials with the capability to adapt their structural characteristics, monitor their health condition, perform self-diagnosis and self-repair, morph their shape, and undergo significant controlled motion.

Download or read book Direct Methods in the Calculus of Variations written by Bernard Dacorogna and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years there has been a considerable renewal of interest in the clas sical problems of the calculus of variations, both from the point of view of mathematics and of applications. Some of the most powerful tools for proving existence of minima for such problems are known as direct methods. They are often the only available ones, particularly for vectorial problems. It is the aim of this book to present them. These methods were introduced by Tonelli, following earlier work of Hilbert and Lebesgue. Although there are excellent books on calculus of variations and on direct methods, there are recent important developments which cannot be found in these books; in particular, those dealing with vector valued functions and relaxation of non convex problems. These two last ones are important in appli cations to nonlinear elasticity, optimal design . . . . In these fields the variational methods are particularly effective. Part of the mathematical developments and of the renewal of interest in these methods finds its motivations in nonlinear elasticity. Moreover, one of the recent important contributions to nonlinear analysis has been the study of the behaviour of nonlinear functionals un der various types of convergence, particularly the weak convergence. Two well studied theories have now been developed, namely f-convergence and compen sated compactness. They both include as a particular case the direct methods of the calculus of variations, but they are also, both, inspired and have as main examples these direct methods.

Download or read book Manufacturing System written by Faieza Abdul Aziz and published by BoD – Books on Demand. This book was released on 2012-05-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to bring together selected recent advances, tools, application and new ideas in manufacturing systems. Manufacturing system comprise of equipment, products, people, information, control and support functions for the competitive development to satisfy market needs. It provides a comprehensive collection of papers on the latest fundamental and applied industrial research. The book will be of great interest to those involved in manufacturing engineering, systems and management and those involved in manufacturing research.

Download or read book Design of Shape Memory Alloy SMA Actuators written by Ashwin Rao and published by Springer. This book was released on 2015-05-08 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short monograph presents an analysis and design methodology for shape memory alloy (SMA) components such as wires, beams, and springs for different applications. The solid-solid, diffusionless phase transformations in thermally responsive SMA allows them to demonstrate unique characteristics like superelasticity and shape memory effects. The combined sensing and actuating capabilities of such materials allows them to provide a system level response by combining multiple functions in a single material system. In SMA, the combined mechanical and thermal loading effects influence the functionality of such materials. The aim of this book is to make the analysis of these materials accessible to designers by developing a "strength of materials" approach to the analysis and design of such SMA components inspired from their various applications with a review of various factors influencing the design process for such materials.

Download or read book Elasticity and Modeling written by W. F. Chen and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shape Memory Alloy Actuators written by Mohammad H. Elahinia and published by John Wiley & Sons. This book was released on 2016-01-19 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic approach to realizing NiTi shape memory alloy actuation, and is aimed at science and engineering students who would like to develop a better understanding of the behaviors of SMAs, and learn to design, simulate, control, and fabricate these actuators in a systematic approach. Several innovative biomedical applications of SMAs are discussed. These include orthopedic, rehabilitation, assistive, cardiovascular, and surgery devices and tools. To this end unique actuation mechanisms are discussed. These include antagonistic bi-stable shape memory-superelastic actuation, shape memory spring actuation, and multi axial tension-torsion actuation. These actuation mechanisms open new possibilities for creating adaptive structures and biomedical devices by using SMAs.

Download or read book Shape Memory Alloys written by Dimitris C. Lagoudas and published by Springer Science & Business Media. This book was released on 2008-06-05 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a working knowledge of the modeling and engineering applications of shape memory alloys (SMAs), beginning with a rigorous introduction to continuum mechanics and continuum thermodynamics as they relate to the development of SMA modeling.Modern SMAs can recover from large amounts of bending and deformation, and millions of repetitions within recoverable ranges. SMAs are used in the medical industry to create stents, in the dental industry to create dental and orthodontic archwires, and in the aerospace industry to create fluid fittings. The text presents a unified approach to the constitutive modeling of SMAs, including modeling of magnetic and high temperature SMAs.

Download or read book Pseudoelasticity of Shape Memory Alloys written by Andrzej Ziolkowski and published by Butterworth-Heinemann. This book was released on 2015-03-23 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pseudoelasticity of Shape Memory Alloys: Theory and Experimental Studies is devoted to the phenomenon of pseudoelasticity (superelasticity) exhibited by shape memory alloy materials. It provides extensive introductory content on the state-of-the-art in the field, including SMA materials development, definition of shape memory effects, and discussions on where shape memory behavior is found in various engineering application areas. The book features a survey of modeling approaches targeted at reliable prediction of SMA materials' behavior on different scales of observation, including atomistic, microscopic, mezoscopic, and macroscopic. Researchers and graduate students will find detailed information on the modern methodologies used in the process of building constitutive models of advanced materials exhibiting complex behavior. - Introduces the phenomenon of pseudoelasticity exhibited by shape memory alloy materials - Features a survey of modeling approaches targeted at reliable prediction of SMN materials' behavior on different scales of observation - Provides extensive coverage of the state-of-the-art in the field - Ideal reference for researchers and graduate students interested in the modern methodologies used in the process of building constitutive models of advanced materials

Download or read book Shape Memory Alloys Handbook written by Christian Lexcellent and published by John Wiley & Sons. This book was released on 2013-04-08 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to understand and describe the martensitic phase transformation and the process of martensite platelet reorientation. These two key elements enable the author to introduce the main features associated with the behavior of shape-memory alloys (SMAs), i.e. the one-way shape-memory effect, pseudo-elasticity, training and recovery. Attention is paid in particular to the thermodynamical frame for solid materials modeling at the macroscopic scale and its applications, as well as to the particular use of such alloys – the simplified calculations for the bending of bars and their torsion. Other chapters are devoted to key topics such as the use of the “crystallographical theory of martensite” for SMA modeling, phenomenological and statistical investigations of SMAs, magneto-thermo-mechanical behavior of magnetic SMAs and the fracture mechanics of SMAs. Case studies are provided on the dimensioning of SMA elements offering the reader an additional useful framework on the subject. Contents 1. Some General Points about SMAs. 2. The World of Shape-memory Alloys. 3. Martensitic Transformation. 4. Thermodynamic Framework for the Modeling of Solid Materials. 5. Use of the “CTM” to Model SMAs. 6. Phenomenological and Statistical Approaches for SMAs. 7. Macroscopic Models with Internal Variables. 8. Design of SMA Elements: Case Studies. 9. Behavior of Magnetic SMAs. 10. Fracture Mechanics of SMAs. 11. General Conclusion. Appendix 1. Intrinsic Properties of Rotation Matrices. Appendix 2. “Twinning Equation” Demonstration. Appendix 3. Calculation of the Parameters a, n and Q from the “Twinning” Equation. Appendix 4. “Twinned” Austenite/Martensite Equation. About the Authors Christian Lexcellent is Emeritus Professor at the École National Supérieure de Mécanique et des Microtechniques de Besançon and a researcher in the Department of Applied Mechanics at FEMTO-ST in France. He is a specialist in the mechanics of materials and phase transition and has taught in the subjects of mechanics of continuum media and shape memory alloys. He is also a member of the International Committee of ESOMAT.

Download or read book European Symposium on Martensitic Transformations written by Sergey Prokoshkin and published by Trans Tech Publications Ltd. This book was released on 2013-01-25 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: ESOMAT 2012 Selected, peer reviewed papers from the 9th European Symposium on Martensitic Transformations ESOMAT 2012, September 9-16, 2012, Saint-Petersburg, Russia

Download or read book Shape Memory Polymers written by Jinlian Hu and published by Smithers Rapra. This book was released on 2014-05-27 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape-memory polymers (SMP) are a unique branch of the smart materials family which are capable of changing shape on-demand upon exposure to external stimulus. The discovery of SMP made a significant breakthrough in the developments of novel smart materials for a variety of engineering applications, superseded the traditional materials, and also influenced the current methods of product designing. This book provides the latest advanced information of on-going research domains of SMP. This will certainly enlighten the reader to the achievements and tremendous potentials of SMP. The basic fundamentals of SMP, including shape-memory mechanisms and mechanics are described. This will aid reader to become more familiar with SMP and the basic concepts, thus guiding them in undergoing independent research in the SMP field. The book also provides the reader with associated challenges and existing application problems of SMP. This could assist the reader to focus more on these issues and further exploit their knowledge to look for innovative solutions. Future outlooks of SMP research are discussed as well. This book should prove to be extremely useful for academics, R&D managers, researcher scientists, engineers, and all others related to the SMP research.

Download or read book Mechanics of Solid Materials written by Jean Lemaitre and published by Cambridge University Press. This book was released on 1994-08-25 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Translation of hugely successful book aimed at advanced undergraduates, graduate students and researchers.