Download or read book Development of a Dynamic Coupled Hydro geomechanical Code and Its Application to Induced Seismicity written by Mamun Md Miah and published by . This book was released on 2017 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research describes the importance of a hydro-geomechanical coupling in the geologic sub-surface environment from fluid injection at geothermal plants, large-scale geological CO2 sequestration for climate mitigation, enhanced oil recovery, and hydraulic fracturing during wells construction in the oil and gas industries. A sequential computational code is developed to capture the multiphysics interaction behavior by linking a flow simulation code TOUGH2 and a geomechanics modeling code PyLith. Numerical formulation of each code is discussed to demonstrate their modeling capabilities. The computational framework involves sequential coupling, and solution of two sub-problems- fluid flow through fractured and porous media and reservoir geomechanics. For each time step of flow calculation, pressure field is passed to the geomechanics code to compute effective stress field and fault slips. A simplified permeability model is implemented in the code that accounts for the permeability of porous and saturated rocks subject to confining stresses. The accuracy of the TOUGH-PyLith coupled simulator is tested by simulating Terzaghi's 1D consolidation problem. The modeling capability of coupled poroelasticity is validated by benchmarking it against Mandel's problem. The code is used to simulate both quasi-static and dynamic earthquake nucleation and slip distribution on a fault from the combined effect of far field tectonic loading and fluid injection by using an appropriate fault constitutive friction model. Results from the quasi-static induced earthquake simulations show a delayed response in earthquake nucleation. This is attributed to the increased total stress in the domain and not accounting for pressure on the fault. However, this issue is resolved in the final chapter in simulating a single event earthquake dynamic rupture. Simulation results show that fluid pressure has a positive effect on slip nucleation and subsequent crack propagation. This is confirmed by running a sensitivity analysis that shows an increase in injection well distance results in delayed slip nucleation and rupture propagation on the fault.

Download or read book Numerical study of coupled THM C processes related to geo energy production written by Yang Gou and published by Cuvillier Verlag. This book was released on 2018-06-20 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis a parallel simulation platform, namely TOUGH2MP-FLAC3Dplus, was further developed by linking the multiphase multicomponent flow code TOUGH2MP and the further developed geomechanical code FLAC3Dplus for large-scale simulation of the coupled THM/C processes related to geo-energy production. A series of mathematical/physical models were developed and implemented in this platform, including (1) an improved equation of state for CO2-CH4-H2O-NaCl system which considers the effect of salt on phase partition and fluid properties in gas reservoirs; (2) a modified coupling approach for the simulation of hydraulic fracturing in tight geo-reservoirs, which considers the multiphase multicomponent leakoff effects; (3) a thermo-hydro-mechanical model based on a crack tensor for naturally fractured rock masses and faults. All these verified models have been applied in three different case studies, including CO2 enhanced gas recovery (EGR) in the Altmark natural gas field; (2) Hydraulic fracturing in three different types of geo-reservoirs (tight gas, oil and geothermal reservoir); (3) Geothermal energy utilization induced seismicity in Unterhaching. The developed models and the numerical platform can be used to predict the coupled THM/C behavior of rock formations, to optimize the CO2-EGR and hydraulic fracturing in tight geo-reservoirs, as well as reduce the geo-risks related to geo-energy production.

Download or read book Earthquake Geotechnical Engineering Design written by Michele Maugeri and published by Springer Science & Business Media. This book was released on 2014-02-03 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pseudo-static analysis is still the most-used method to assess the stability of geotechnical systems that are exposed to earthquake forces. However, this method does not provide any information about the deformations and permanent displacements induced by seismic activity. Moreover, it is questionable to use this approach when geotechnical systems are affected by frequent and rare seismic events. Incidentally, the peak ground acceleration has increased from 0.2-0.3 g in the seventies to the current value of 0.6-0.8 g. Therefore, a shift from the pseudo-static approach to performance-based analysis is needed. Over the past five years considerable progress has been made in Earthquake Geotechnical Engineering Design (EGED). The most recent advances are presented in this book in 6 parts. The evaluation of the site amplification is covered in Part I of the book. In Part II the evaluation of the soil foundation stability against natural slope failure and liquefaction is treated. In the following 3 Parts of the book the EGED for different geotechnical systems is presented as follows: the design of levees and dams including natural slopes in Part III; the design of foundations and soil structure interaction analysis in Part IV; underground structures in Part V. Finally in Part VI, new topics like the design of reinforced earth retaining walls and landfills are covered.

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-10-22 with total page 5946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.

Download or read book Induced Seismicity Potential in Energy Technologies written by National Research Council and published by National Academies Press. This book was released on 2013-08-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past several years, some energy technologies that inject or extract fluid from the Earth, such as oil and gas development and geothermal energy development, have been found or suspected to cause seismic events, drawing heightened public attention. Although only a very small fraction of injection and extraction activities among the hundreds of thousands of energy development sites in the United States have induced seismicity at levels noticeable to the public, understanding the potential for inducing felt seismic events and for limiting their occurrence and impacts is desirable for state and federal agencies, industry, and the public at large. To better understand, limit, and respond to induced seismic events, work is needed to build robust prediction models, to assess potential hazards, and to help relevant agencies coordinate to address them. Induced Seismicity Potential in Energy Technologies identifies gaps in knowledge and research needed to advance the understanding of induced seismicity; identify gaps in induced seismic hazard assessment methodologies and the research to close those gaps; and assess options for steps toward best practices with regard to energy development and induced seismicity potential.

Download or read book Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2010-04-01 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary book encompasses the fields of rock mechanics, structural geology and petroleum engineering to address a wide range of geomechanical problems that arise during the exploitation of oil and gas reservoirs. It considers key practical issues such as prediction of pore pressure, estimation of hydrocarbon column heights and fault seal potential, determination of optimally stable well trajectories, casing set points and mud weights, changes in reservoir performance during depletion, and production-induced faulting and subsidence. The book establishes the basic principles involved before introducing practical measurement and experimental techniques to improve recovery and reduce exploitation costs. It illustrates their successful application through case studies taken from oil and gas fields around the world. This book is a practical reference for geoscientists and engineers in the petroleum and geothermal industries, and for research scientists interested in stress measurements and their application to problems of faulting and fluid flow in the crust.

Download or read book Soil Dynamics and Earthquake Geotechnical Engineering written by Boominathan Adimoolam and published by Springer. This book was released on 2018-06-09 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected proceedings of the annual conference of the Indian Geotechnical Society, and covers various aspects of soil dynamics and earthquake geotechnical engineering. The book includes a wide range of studies on seismic response of dams, foundation-soil systems, natural and man-made slopes, reinforced-earth walls, base isolation systems and so on, especially focusing on the soil dynamics and case studies from the Indian subcontinent. The book also includes chapters addressing related issues such as landslide risk assessments, liquefaction mitigation, dynamic analysis of mechanized tunneling, and advanced seismic soil-structure-interaction analysis. Given its breadth of coverage, the book offers a useful guide for researchers and practicing civil engineers alike.

Download or read book Geomechanical Reservoir Model Calibration and Uncertainty Assessment from Microseismic Data written by Mohammadali Tarrahi and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic stimulation of low permeability rocks in unconventional reservoirs has been observed to trigger microearthquakes (MEQs). Triggering of the MEQ events has been linked to the pore pressure, temperature, and in-situ stress variations which result in crack initiation. The resulting clouds of micro-seismic events are believed to carry information about the underlying coupled flow, geomechanics, and thermal processes and hence rock hydraulic and geomechanical property distributions. We develop a probabilistic framework called stochastic seismicity-based reservoir characterization (SSBRC) to integrate microseismic events to infer reservoir property distributions. To model the geothermal reservoir stimulation, a fully coupled thermo-poroelastic finite element method (FEM) model has been developed to handle the coupled process of heat transport, fluid flow, and rock deformation. To simulate the stimulation process, an alternate simplistic approach is also acquired based on a major hypothesis that MEQ events are triggered by an increase in pore pressure. Based on this hypothesis, the distribution of the resulting microseismicity clouds can be viewed as monitoring data that carry important information about the spatial distribution of rock permeability. We apply the ensemble Kalman filter (EnKF) to integrate the resulting continuous seismicity map to estimate hydraulic and geomechanical property distributions. We demonstrate that the standard application of the EnKF with such large correlated datasets can result in substantial loss of ensemble spread. We investigate three alternative implementation methods to mitigate this issue. We first present the methodology proposed for MEQ data integration with the EnKF, followed by a number of examples of applying SSBRC to both forward modeling methods to illustrate the uncertainty underestimation effect when the standard EnKF is applied to large-scale seismicity density map data. We then discuss the proposed methods for improving the uncertainty quantification results and illustrate the effectiveness of these methods by applying them to a number of numerical examples. We also apply and extend the proposed microseismic data integration method to unconventional reservoir with horizontal well and multistage hydraulic fractures to characterize the reservoir and induced fractures. We also investigate the effect of variogram model uncertainty in the EnKF performance and propose a modified EnKF algorithm to handle the uncertainty in variogram parameters. We also develop a computationally efficient data assimilation procedure by employing a pseudo forecast method and geological model clustering method along with EnKF. By a set of numerical experiments, we show how the proposed fast history matching method is successful in preserving the ensemble spread and expediting the integration procedure. The electronic version of this dissertation is accessible from http://hdl.handle.net/1969.1/154962

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 8083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Download or read book Rock Dynamics Progress and Prospect Volume 1 written by Jianchun Li and published by CRC Press. This book was released on 2022-12-06 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Dynamics: Progress and Prospect contains 153 scientific and technical papers presented at the Fourth International Conference on Rock Dynamics and Applications (RocDyn-4, Xuzhou, China, 17-19 August 2022). The two-volume set has 7 sections. Volume 1 includes the first four sections with 6 keynotes and 5 young scholar plenary session papers, and contributions on analysis and theoretical development, and experimental testing and techniques. Volume 2 contains the remaining three sections with 74 papers on numerical modelling and methods, seismic and earthquake engineering, and rock excavation and engineering. Rock Dynamics: Progress and Prospect will serve as a reference on developments in rock dynamics scientific research and on rock dynamics engineering applications. The previous volumes in this series (RocDyn-1, RocDyn-2, and RocDyn-3) are also available via CRC Press.

Download or read book Geotechnical Abstracts written by and published by . This book was released on 1986 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rock Dynamics Progress and Prospect Volume 2 written by Jianchun Li and published by CRC Press. This book was released on 2023-05-28 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Dynamics: Progress and Prospect contains 153 scientific and technical papers presented at the Fourth International Conference on Rock Dynamics and Applications (RocDyn-4, Xuzhou, China, 17-19 August 2022). The two-volume set has 7 sections. Volume 1 includes the first four sections with 6 keynotes and 5 young scholar plenary session papers, and contributions on analysis and theoretical development, and experimental testing and techniques. Volume 2 contains the remaining three sections with 74 papers on numerical modelling and methods, seismic and earthquake engineering, and rock excavation and engineering. Rock Dynamics: Progress and Prospect will serve as a reference on developments in rock dynamics scientific research and on rock dynamics engineering applications. The previous volumes in this series (RocDyn-1, RocDyn-2, and RocDyn-3) are also available via CRC Press.

Download or read book The Combined Finite Discrete Element Method written by Antonio A. Munjiza and published by John Wiley & Sons. This book was released on 2004-04-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combined finite discrete element method is a relatively new computational tool aimed at problems involving static and / or dynamic behaviour of systems involving a large number of solid deformable bodies. Such problems include fragmentation using explosives (e.g rock blasting), impacts, demolition (collapsing buildings), blast loads, digging and loading processes, and powder technology. The combined finite-discrete element method - a natural extension of both discrete and finite element methods - allows researchers to model problems involving the deformability of either one solid body, a large number of bodies, or a solid body which fragments (e.g. in rock blasting applications a more or less intact rock mass is transformed into a pile of solid rock fragments of different sizes, which interact with each other). The topic is gaining in importance, and is at the forefront of some of the current efforts in computational modeling of the failure of solids. * Accompanying source codes plus input and output files available on the Internet * Important applications such as mining engineering, rock blasting and petroleum engineering * Includes practical examples of applications areas Essential reading for postgraduates, researchers and software engineers working in mechanical engineering.

Download or read book Earthquake Engineering written by P. Bisch and published by CRC Press. This book was released on 1998-01-01 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text details the proceedings of the 11th European Conference on Earthquake Engineering. CD-ROM contains full text of the 650 papers in printed form. This would have been 6 volumes of 1000 pages each. Topics covered: are: Engineering seismology; Experimental aspects for soils, rocks and construction material; Computational aspects for materials, structures and soil-structure interaction; Civil engineering projects; Active and passive isolation; Industrial facilities, lifelines and equipment; Vulnerability, seismic risk and strengthening; Site effects and spatial variability of seismic motions; Reliability analyses and probabilistic aspects; Design criteria, codees and standards; Eurocode 8 and national applications; Seismic risk in the Mediterranean basin; Post earthquake investigations;

Download or read book Source Mechanisms of Earthquakes written by Agustín Udías Vallina and published by Cambridge University Press. This book was released on 2014-04-24 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative new approach to studying earthquake source mechanisms, combining theory and observation, for graduate students, researchers and seismology professionals.

Download or read book Porous Rock Fracture Mechanics written by Amir Shojaei and published by Woodhead Publishing. This book was released on 2017-05-05 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous Rock Failure Mechanics: Hydraulic Fracturing, Drilling and Structural Engineering focuses on the fracture mechanics of porous rocks and modern simulation techniques for progressive quasi-static and dynamic fractures. The topics covered in this volume include a wide range of academic and industrial applications, including petroleum, mining, and civil engineering. Chapters focus on advanced topics in the field of rock's fracture mechanics and address theoretical concepts, experimental characterization, numerical simulation techniques, and their applications as appropriate. Each chapter reflects the current state-of-the-art in terms of the modern use of fracture simulation in industrial and academic sectors. Some of the major contributions in this volume include, but are not limited to: anisotropic elasto-plastic deformation mechanisms in fluid saturated porous rocks, dynamics of fluids transport in fractured rocks and simulation techniques, fracture mechanics and simulation techniques in porous rocks, fluid-structure interaction in hydraulic driven fractures, advanced numerical techniques for simulation of progressive fracture, including multiscale modeling, and micromechanical approaches for porous rocks, and quasi-static versus dynamic fractures in porous rocks. This book will serve as an important resource for petroleum, geomechanics, drilling and structural engineers, R&D managers in industry and academia. - Includes a strong editorial team and quality experts as chapter authors - Presents topics identified for individual chapters are current, relevant, and interesting - Focuses on advanced topics, such as fluid coupled fractures, rock's continuum damage mechanics, and multiscale modeling - Provides a 'one-stop' advanced-level reference for a graduate course focusing on rock's mechanics