Download or read book Turbulence Modeling Validation Testing and Development written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-17 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this work is to provide accurate numerical solutions for selected flow fields and to compare and evaluate the performance of selected turbulence models with experimental results. Four popular turbulence models have been tested and validated against experimental data often turbulent flows. The models are: (1) the two-equation k-epsilon model of Wilcox, (2) the two-equation k-epsilon model of Launder and Sharma, (3) the two-equation k-omega/k-epsilon SST model of Menter, and (4) the one-equation model of Spalart and Allmaras. The flows investigated are five free shear flows consisting of a mixing layer, a round jet, a plane jet, a plane wake, and a compressible mixing layer; and five boundary layer flows consisting of an incompressible flat plate, a Mach 5 adiabatic flat plate, a separated boundary layer, an axisymmetric shock-wave/boundary layer interaction, and an RAE 2822 transonic airfoil. The experimental data for these flows are well established and have been extensively used in model developments. The results are shown in the following four sections: Part A describes the equations of motion and boundary conditions; Part B describes the model equations, constants, parameters, boundary conditions, and numerical implementation; and Parts C and D describe the experimental data and the performance of the models in the free-shear flows and the boundary layer flows, respectively. Bardina, J. E. and Huang, P. G. and Coakley, T. J. Ames Research Center...
Download or read book The Aerodynamics of Heavy Vehicles Trucks Buses and Trains written by Rose McCallen and published by Springer Science & Business Media. This book was released on 2004-09 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the carefully edited contributions to the United Engineering Foundation Conference: The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held in Monterey, California from December 2-6, 2002. This conference brought together 90 leading engineering researchers discussing the aerodynamic drag of heavy vehicles. The book topics include a comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry are presented as well, along with their use in evaluating drag reduction devices.
Download or read book Turbulence Models and Their Application written by Tuncer Cebeci and published by Springer Science & Business Media. This book was released on 2003-12-04 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief review of the more popular turbulence models, the author presents and discusses accurate and efficient numerical methods for solving the boundary-layer equations with turbulence models based on algebraic formulas (mixing length, eddy viscosity) or partial-differential transport equations. A computer program employing the Cebeci-Smith model and the k-e model for obtaining the solution of two-dimensional incompressible turbulent flows without separation is discussed in detail and is presented in the accompanying CD.
Download or read book Turbulence Modeling for CFD CD ROM written by David C. Wilcox and published by . This book was released on 2006 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulence and Transition Modelling written by M. Hallbäck and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to give, within a single volume, an introduction to the fields of turbulence modelling and transition-to-turbulence prediction, and to provide the physical background for today's modelling approaches in these problem areas as well as giving a flavour of advanced use of prediction methods. Turbulence modelling approaches, ranging from single-point models based on the eddy-viscosity concept and the Reynolds stress transport equations (Chapters 3,4,5), to large-eddy simulation (LES) techniques (Ch. 7), are covered. The foundations of hydrodynamical stability and transition are presented (Ch. 2) along with transition prediction methods based on single-point closures (Ch. 6), LES techniques (Ch. 7) and the parabolized stability equations (Ch. 8). The book addresses engineers and researchers, in industry or academia, who are entering into the fields of turbulence or transition modelling research or need to apply turbulence or transition prediction methods in their work.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1995 with total page 1732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transition Turbulence and Combustion Modelling written by A. Hanifi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This single-volume work gives an introduction to the fields of transition, turbulence, and combustion modeling of compressible flows and provides the physical background for today’s modeling approaches in these fields. It presents basic equations and discusses fundamental aspects of hydrodynamical instability.
Download or read book Modeling Complex Turbulent Flows written by Manuel D. Salas and published by Springer Science & Business Media. This book was released on 1999-04-30 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence modeling both addresses a fundamental problem in physics, 'the last great unsolved problem of classical physics,' and has far-reaching importance in the solution of difficult practical problems from aeronautical engineering to dynamic meteorology. However, the growth of supercom puter facilities has recently caused an apparent shift in the focus of tur bulence research from modeling to direct numerical simulation (DNS) and large eddy simulation (LES). This shift in emphasis comes at a time when claims are being made in the world around us that scientific analysis itself will shortly be transformed or replaced by a more powerful 'paradigm' based on massive computations and sophisticated visualization. Although this viewpoint has not lacked ar ticulate and influential advocates, these claims can at best only be judged premature. After all, as one computational researcher lamented, 'the com puter only does what I tell it to do, and not what I want it to do. ' In turbulence research, the initial speculation that computational meth ods would replace not only model-based computations but even experimen tal measurements, have not come close to fulfillment. It is becoming clear that computational methods and model development are equal partners in turbulence research: DNS and LES remain valuable tools for suggesting and validating models, while turbulence models continue to be the preferred tool for practical computations. We believed that a symposium which would reaffirm the practical and scientific importance of turbulence modeling was both necessary and timely.
Download or read book Proceedings of the 4th International Seminar on Non Ideal Compressible Fluid Dynamics for Propulsion and Power written by Martin White and published by Springer Nature. This book was released on 2023-05-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the main contributions from the 4th edition of the NICFD conference, organized by the Special Interest Group on Non-Ideal Compressible Fluid Dynamics (SIG- 49). It provides some of the latest research findings in the field of NICFD, relevant to a number of engineering applications related to the conversion of renewable and waste energy sources, like, e.g., organic Rankine cycles, super-critical CO2 cycle power plants, combustors operating with supercritical fluids, and heat pumps. The book reports on research encompassing theoretical, computational, and experimental aspects of the gas-dynamics of non-ideal reactive and non-reactive flows and their impact for the design of internal-flow components (turbomachinery, heat exchangers, combustors). All chapters address challenges related to characterizing the behaviour of non-ideal fluids, where state-of-the-art models are used to predict the thermo-physical properties of both pure and multi-phase fluids.
Download or read book 28th European Symposium on Computer Aided Process Engineering written by Stefan Radl and published by Elsevier. This book was released on 2018-06-26 with total page 1766 pages. Available in PDF, EPUB and Kindle. Book excerpt: 28th European Symposium on Computer Aided Process Engineering, Volume 43 contains the papers presented at the 28th European Society of Computer-Aided Process Engineering (ESCAPE) event held in Graz, Austria June 10-13 , 2018. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. Presents findings and discussions from the 28th European Society of Computer-Aided Process Engineering (ESCAPE) event
Download or read book A Collection of Technical Papers written by American Institute of Aeronautics and Astronautics and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1997 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 13th AIAA Computational Fluid Dynamics Conference. It addresses numerical procedures for the solution of fluid dynamics and interdisciplinary problems. Technical sessions of the conference focus on design optimization, solution adaptive techniques, convergence acceleration methods, high-resolution schemes, parallel computing as well as improved algorithms for the solution of viscous, inviscid, and multi-component flow applications. The programme also includes a panel discussion addressing the evoluting roles of government, industry and academia in future CFD developments.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1995 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Flows written by Jean Piquet and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: obtained are still severely limited to low Reynolds numbers (about only one decade better than direct numerical simulations), and the interpretation of such calculations for complex, curved geometries is still unclear. It is evident that a lot of work (and a very significant increase in available computing power) is required before such methods can be adopted in daily's engineering practice. I hope to l"Cport on all these topics in a near future. The book is divided into six chapters, each· chapter in subchapters, sections and subsections. The first part is introduced by Chapter 1 which summarizes the equations of fluid mechanies, it is developed in C~apters 2 to 4 devoted to the construction of turbulence models. What has been called "engineering methods" is considered in Chapter 2 where the Reynolds averaged equations al"C established and the closure problem studied (§1-3). A first detailed study of homogeneous turbulent flows follows (§4). It includes a review of available experimental data and their modeling. The eddy viscosity concept is analyzed in §5 with the l"Csulting ~alar-transport equation models such as the famous K-e model. Reynolds stl"Css models (Chapter 4) require a preliminary consideration of two-point turbulence concepts which are developed in Chapter 3 devoted to homogeneous turbulence. We review the two-point moments of velocity fields and their spectral transforms (§ 1), their general dynamics (§2) with the particular case of homogeneous, isotropie turbulence (§3) whel"C the so-called Kolmogorov's assumptions are discussed at length.
Download or read book Advances in Heat Transfer written by and published by Academic Press. This book was released on 2000-10-31 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer is designed to fill the information gap between regularly scheduled journals and university level textbooks by providing in-depth review articles over a broader scope than is allowable in either journals or texts.
Download or read book Turbulence Modeling Validation Testing and Development written by and published by . This book was released on 1997 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CFL3D User s Manual Version 5 0 written by Sherrie L. Krist and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
