Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrodeposition of Composite Materials written by A.M.A Mohamed and published by BoD – Books on Demand. This book was released on 2016-03-23 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposite coatings have various properties that can be utilized for corrosion protection and tribological improvements. Synthesis of the nanocomposite coatings using an electrodeposition method allows unique control of the experimental parameters. By fine tuning the experimental parameters, various compositions and properties can be obtained for the nanocomposite coatings. This book covers some of the electrochemical methods used for nanocomposite coating deposition as well as discusses in detail examples of several nanocomposite coating. The corrosion and tribological performance of the nanocomposite coatings are also covered and some nanocomposite coatings are discussed for specific technological areas, such as fuel cells and microelectronics.

Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metals Abstracts Index written by and published by . This book was released on 1995 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanocomposite Coatings written by Mahmood Aliofkhazraei and published by Nova Science Pub Incorporated. This book was released on 2011-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews research activities around fabrication of these kinds of two dimensional nanostructured coatings with examples of enhanced mechanical properties, corrosion resistance, and physical characteristics. As one of the useful and simple methods for fabrication of nanocomposite coatings, electrochemical deposition (electroplating) techniques are a strong focus in this book. The relation among nanotechnology and these kinds of nanostructures that come from "size effect" and "distribution effect" is discussed through different chapters of this book. Nanocomposite coatings have numerous advantages.

Download or read book Cold Spray Technology written by Anatolii Papyrin and published by Elsevier. This book was released on 2006-10-04 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is Cold Spray technology. Cold Spray is a process of applying coatings by exposing a metallic or dielectric substrate to a high velocity (300 to 1200 m/s) jet of small (1 to 50 μm) particles accelerated by a supersonic jet of compressed gas. This process is based on the selection of the combination of particle temperature, velocity, and size that allows spraying at the lowest temperature possible. In the Cold Spray process, powder particles are accelerated by the supersonic gas jet at a temperature that is always lower than the melting point of the material, resulting in coating formation from particles in the solid state. As a consequence, the deleterious effects of high-temperature oxidation, evaporation, melting, crystallization, residual stresses, gas release, and other common problems for traditional thermal spray methods are minimized or eliminated. This book is the first of its kind on the Cold Spray process. Cold Spray Technology covers a wide spectrum of various aspects of the Cold Spray technology, including gas-dynamics, physics of interaction of high-speed solid particles with a substrate as well as equipment, technologies, and applications. Cold Spray Technology includes the results of more than 20 years of original studies (1984-2005) conducted at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Science, as well as the results of studies conducted at most of the research centres around the world. The authors' goal is threefold. The first goal is to explain basic principles and advantages of the Cold Spray process. The second goal is, to give practical information on technologies and equipment. The third goal is to present the current state of research and development in this field over the world. The book provides coverage and data that will be of interest for users of Cold Spray technology as well as for other coating experts. At the present time the Cold Spray method is recognized by world leading scientists and specialists. A wide spectrum of research is being conducted at many research centres and companies in many countries. New approach to spray coatings Results are exceptionally pure coatings Low spray temperature without degradation of powder and substrate materials High productivity, high deposition efficiency High operational safety because of absence of high temperature gas jets, radiation and explosive gases Excellent thermal and electrical conductivity Wide spectrum of applications because of important advantages of the process

Download or read book Ceramic Abstracts written by and published by . This book was released on 1998 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1994 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cold Spray Coatings written by Pasquale Cavaliere and published by Springer. This book was released on 2017-11-08 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the contributions of experts in the field to describe the behavior of various materials, micromechanisms involved during processing, and the optimization of cold-spray technology. It spans production, characterization, and applications including wear resistance, fatigue, life improvement, thermal barriers, crack repair, and biological applications. Cold spray is an innovative coating technology based on the kinetic energy gained by particles sprayed at very high pressures. While the technique was developed in the 1990s, industrial and scientific interest in this technology has grown vastly in the last ten years. Recently, many interesting applications have been associated with cold-sprayed coatings, including wear resistance, fatigue life improvement, thermal barriers, biological applications, and crack repair. However, many fundamental aspects require clarification and description.

Download or read book Ceramics Technology written by and published by . This book was released on 1996 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Download or read book Biomaterials written by Joon B. Park and published by CRC Press. This book was released on 2002-08-29 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials: Principles and Applications offers a comprehensive review of all the major biomaterials in this rapidly growing field. In recent years, the role of biomaterials has been influenced considerably by advances in many areas of biotechnology and science, as well as advances in surgical techniques and instruments. Comprising chapters

Download or read book Tribology and Applications of Self Lubricating Materials written by Emad Omrani and published by CRC Press. This book was released on 2017-11-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology and Applications of Self-Lubricating Materials provides insight into the complex mechanisms behind the development of self-lubricating materials, which due to their ability to transfer embedded solid lubricants to the contact surface to decrease wear rate and friction in the absence of an external lubricant, make up an important part of engineering materials used today. This book emphasizes an understanding of the tribological nature of different composites such as metal, polymer, and ceramic matrix composites and discusses the compatibility of these composites with specific lubricants. The book also offers a view of advancements in the development of self-lubricating mechanisms and covers the latest technologies in the field.

Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Titanium Dioxide TiO2 and Its Applications written by Francesco Parrino and published by Elsevier. This book was released on 2020-11-29 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific interest in TiO2-based materials has exponentially grown in the last few decades. Titanium Dioxide (TiO2) and Its Applications introduces the main physicochemical properties of TiO2 which are the basis of its applications in various fields. While the basic principles of the TiO2 properties have been the subject of various previous publications, this book is mainly devoted to TiO2 applications. The book includes contributions written by experts from a wide range of disciplines in order to address titanium dioxide's utilization in energy, consumer, materials, devices, and catalytic applications. The various applications identified include: photocatalysis, catalysis, optics, electronics, energy storage and production, ceramics, pigments, cosmetics, sensors, and heat transfer. Titanium Dioxide (TiO2) and Its Applications is suitable for a wide readership in the disciplines of materials science, chemistry, and engineering in both academia and industry. - Includes a wide range of current and emerging applications of titanium dioxide in the fields of energy, consumer applications, materials, and devices - Provides a brief overview of titanium dioxide and its properties, as well as techniques to design, deposit, and study the material - Discusses the relevant properties, preparation methods, and other apposite considerations in each application-focused chapter

Download or read book Surface Engineering of Light Alloys written by Hanshan Dong and published by Elsevier. This book was released on 2010-05-24 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties.Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications.With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. - Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties - Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying - Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft