Download or read book Development and application of a low cost computer aided design system in mechanical engineering written by R. E. Grindley and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Computer Aided Design in Automotive Development written by Hirz Mario and published by Springer Science & Business Media. This book was released on 2013-06-22 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry faces constant pressure to reduce development costs and time while still increasing vehicle quality. To meet this challenge, engineers and researchers in both science and industry are developing effective strategies and flexible tools by enhancing and further integrating powerful, computer-aided design technology. This book provides a valuable overview of the development tools and methods of today and tomorrow. It is targeted not only towards professional project and design engineers, but also to students and to anyone who is interested in state-of-the-art computer-aided development. The book begins with an overview of automotive development processes and the principles of virtual product development. Focusing on computer-aided design, a comprehensive outline of the fundamentals of geometry representation provides a deeper insight into the mathematical techniques used to describe and model geometrical elements. The book then explores the link between the demands of integrated design processes and efficient data management. Within automotive development, the management of knowledge and engineering data plays a crucial role. Some selected representative applications provide insight into the complex interactions between computer-aided design, knowledge-based engineering and data management and highlight some of the important methods currently emerging in the field.
Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-12-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard. These seven volumes give the reader a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.
Download or read book Computer Aided Design and Manufacturing written by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.
Download or read book Integrated Computer Aided Design of Mechanical Systems written by Shaker A. Meguid and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the author has presented an introduction to the practical application of some of the essential technical topics related to computer-aided engineering (CAE). These topics include interactive computer graphics (ICG), computer-aided design (CAD), computer and computer-integrated manufacturing (CIM). aided analysis (CAA) Unlike the few texts available, the present work attempts to bring all these seemingly specialised topics together and to demonstrate their integration in the design process through practical applications to real engineering problems and case studies. This book is the result of the author's research and teaching activities for several years of postgraduate and undergraduate courses in mechanical design of rotating machinery, computer-aided engineering, of finite elements, solid mechanics, engineering practical applications and properties of materials at Cranfield Institute of dynamics Technology, Oxford Engineering Science and the University of Manchester Institute of Science and Technology (UMIST). It was soon realised that no books on the most powerful and versatile tools available to engineering designers existed. To satisfy this developing need, this book, on the use of computers to aid the design process and to integrate design, analysis and manufacture, was prepared.
Download or read book Integration of Computer aided Design Techniques Into the Mechanical Product Development Process written by Gerald R. Sturnick and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Computer-Aided Design (CAD) has been called the most significant advance since the development of electricity. CAD is regarded as being the greatest breakthrough of modern times in the search for ways to improve the Product Development Process. This improvement is provided in terms of bringing to market better quality and higher performance products in a significantly shorter design/development cycle and at a lower cost. A survey of the various computer-aided design techniques is presented as they are currently being applied in the mechanical product development process. The research of these techniques includes the basic system operation from a user's perspective, as well as discussion of the relative productivity improvements possible as compared with prior techniques and alternative approaches. The survey results are then enhanced through a case study of the more widely used CAD techniques available to a product design engineer. A typical benchmark part design of a thermoplastic clutch pawl was created and analyzed on some of the latest commercially available computer-aided design systems. This case study, conducted at Xerox Corporation, consisted of both wire frame, surface and solids geometry model creation, mass properties analysis, and finite element model structural analysis."--Abstract.
Download or read book Computer Aided Design and Manufacturing written by U. Rembold and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing contributes to over 60 % of the gross national product of the highly industrialized nations of Europe. The advances in mechanization and automation in manufacturing of international competitors are seriously challenging the market position of the European countries in different areas. Thus it becomes necessary to increase significantly the productivity of European industry. This has prompted many governments to support the development of new automation resources. Good engineers are also needed to develop the required automation tools and to apply these to manufacturing. It is the purpose ofthis book to discuss new research results in manufacturing with engineers who face the challenge of building tomor row's factories. Early automation efforts were centered around mechanical gear-and-cam technology and hardwired electrical control circuits. Because of the decreasing life cycle of most new products and the enormous model diversification, factories cannot be automated efficiently any more by these conventional technologies. With the digital computer, its fast calculation speed and large memory capacity, a new tool was created which can substantially improve the productivity of manufactur ing processes. The computer can directly control production and quality assurance functions and adapt itself quickly to changing customer orders and new products.
Download or read book Computer Aided Optimal Design Structural and Mechanical Systems written by Carlos A. Mota Soares and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the edited version of lectures and selected papers presented at the NATO ADVANCED STUDY INSTITUTE ON COMPUTER AIDED OPTIMAL DESIGN: Structural and Mechanical Systems, held in Tr6ia, Portugal, 29th June to 11th July 1986, and organized by CEMUL -Center of Mechanics and Materials of the Technical University of Lisbon. The Institute was attended by 120 participants from 21 countries, including leading scientists and engineers from universities, research institutions and industry, and Ph.D. students. Some participants presented invited and contributed papers during the Institute and almost all participated actively in discussions on scientific aspects during the Institute. The Advanced Study Institute provided a forum for interaction among eminent scientists and engineers from different schools of thought and young reseachers. The Institute addressed the foundations and current state of the art of essential techniques related to computer aided optimal design of structural and mechanical systems, namely: Vari ational and Finite Element Methods in Optimal Design, Numerical Optimization Techniques, Design Sensitivity Analysis, Shape Optimal Design, Adaptive Finite Element Methods in Shape Optimization, CAD Technology, Software Development Techniques, Integrated Computer Aided Design and Knowledge Based Systems. Special topics of growing importance were also pre sented.
Download or read book Computer Aided Design in Control and Engineering Systems written by P. Martin Larsen and published by Elsevier. This book was released on 2014-05-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Design in Control and Engineering Systems contains the proceedings of the 3rd International Federation of Automatic Control/International Federation for Information Processing Symposium held in Lyngby, Denmark, from July 31 to August 2, 1985. The papers review the state of the art and the trends in development of computer aided design (CAD) of control and engineering systems, techniques, procedures, and concepts. This book is comprised of 74 chapters divided into 17 sections and begins with a description of a prototype computer environment that combines expert control system analysis and design tools. The discussion then turns to decision support systems which could be used to address problems of management and control of large-scale multiproduct multiline batch manufacturing outside the mechanical engineering industries. The following chapters focus on the use of CAD in control education, industrial applications of CAD, and hardware/software systems. Some examples of universal and specialized CAD packages are presented, and applications of CAD in electric power plants, process control systems, and transportation systems are highlighted. The remaining chapters look at CAD/computer aided engineering/computer aided manufacturing systems as well as the use of mathematical methods in CAD. This monograph will be of interest to practitioners in computer science, computer engineering, and industrial engineering.
Download or read book Computer Aided Analysis and Design written by Srinivasa Prakash Regalla and published by I. K. International Pvt Ltd. This book was released on 2013-12-30 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has all the details required for the complete coverage of either undergraduate level or graduate level course on Computer Aided Design for mechanical engineers, design engineers and civil and architectural engineers. Emphasis has been laid on explaining the concepts and techniques more from the practical and implementation standpoint so that the reader can begin hands-on and to enable the reader to write his own programs and design CAD systems for any mechanical element. Each chapter has a large number of solved and unsolved exercise problems. The book is complemented by several open ended projects, topics as well as partial details of solution, in all the chapters. Close knitting among the geometric modeling, computer aided engineering and applications such as rapid prototyping is a special feature of this book. Spread in two parts containing 11 chapters the book broadly covers: " Background of the CAD systems. " Curve, surface and solid modeling techniques " Rapid prototyping technology. " Fundamental techniques of computer aided engineering " Fundamentals of mechanical systems " Numerical techniques for analysis of mechanical systems " Finite difference method and finite element method.
Download or read book Computer Aided Design written by Jose L. Encarnacao and published by Springer. This book was released on 1990-11-02 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2 e This book describes principles, methods and tools that are common to computer applications for design tasks. CAD is considered in this book as a discipline that provides the required know-how in computer hardware and software, in systems analysis and in engineering methodology for specifying, designing, implementing, introducing, and using computer based systems for design purposes. The first chapter gives an impression of the book as a whole, and following chapters deal with the history and the components of CAD, the process aspect of CAD, CAD architecture, graphical devices and systems, CAD engineering methods, CAD data transfer, and application examples. The flood of new developments in the field and the success of the first edition of this book have led the authors to prepare this completely revised, updated and extended second edition. Extensive new material is included on computer graphics, implementation methodology and CAD data transfer; the material on graphics standards is updated. The book is aimed primarily at engineers who design or install CAD systems. It is also intended for students who seek a broad fundamental background in CAD.
Download or read book The CAD Guidebook written by Stephen J. Schoonmaker and published by CRC Press. This book was released on 2002-11-05 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering how to implement, execute, adjust, and administer CAD systems, The CAD Guidebook presents fundamental principles and theories in the function, application, management, and design of 2- and 3-D CAD systems. It illustrates troubleshooting procedures and control techniques for enhanced system operation and development and includes an extensive glossary of key terms and concepts, and end-of-chapter review questions. The book is an essential reference for mechanical, manufacturing, industrial, software, computer, design, quality, and reliability engineers, and an excellent text for undergraduate and graduate students in these disciplines.
Download or read book Principles of Computer aided Design and Manufacturing written by Farid M. L. Amirouche and published by Prentice Hall. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Computer-Aided Design and Manufacturingis the product of many years of experience teaching courses in computer-aided design (CAD). My first book, published in 1991, was a challenge—the technology was evolving and both the hardware and software were changing rapidly. Since then we have come a long way in the CAD/CAM area, and the prospects are even better for future intelligent systems that will enable engineers to design engineering products more efficiently. From design to development, we are attaining some great achievements that will engineer products that are more competitive and ready to meet the market needs. In essence, CAD will provide the engineer more time for the creative aspects in terms of concept formulation and interpretation of the results derived from the analysis. The tools of CAD/CAM are now more standardized and most of our students today come equipped with the basic engineering graphics knowledge needed to learn advanced engineering tools. Having gone through the experience of teaching this course and at the same time trying to adapt to the changing needs in the laboratory, I have written this book under the premise of providing the students the fundamentals needed to advance their understanding of design, analysis, and product development in manufacturing. The latter is achieved through selection of appropriate topics and analytical methods in all aspects of design that are pertinent to CAD with the hope that students will embrace them with conviction. These topics are written in a clear and concise form, and are followed by examples to guide the students and engineers through a wonderful learning experience. The thrust behind learning and teaching CAD is the ability to reach a level of confidence that will enable oneself to interact with ease with the existing CAD systems to solve engineering problems. My philosophy is to teach through examples; hence, every topic covered is followed by examples to demonstrate the concepts. The basic engineering concepts learned in this book are independent of any specific software. We are at a stage now in which CAD/CAM does not necessary have to be self-contained. Rather, students should be able to use other tools to link or provide additional information as necessary to the CAD system. Where some topics could be supplemented, I have taken the liberty in this textbook of allowing the students to perform their exercises using MATLAB for the sake of understanding that CAD is a multidiscipline in nature and some parts of the design or analysis can be programmed in other languages. This is becoming a common practice as vendors are making it simpler and easier to transport files from different systems, and in some cases even be able to integrate different analysis tools to provide the students and engineers the ability to interact with their software to meet their engineering needs. This is certainly true in the variational design and parametric designs areas in which engineering equations are the engine behind the geometrical formulation and design of certain products. This textbook is written to satisfy the CAD requirements courses even though finite element coverage expands beyond the introduction of truss analysis. It is difficult to cover all topics in one semester. Topics should be selected to meet the course needs and the laboratory requirements that go with it. For example, at the University of Illinois at Chicago, we have a required laboratory part of the course where students are given different projects on weekly basis to become proficient in the use of CAD software such as ProE or IDEAS. The last lab projects are more involved and usually require some forms of analysis and animation. My intention is to provide additional topics in finite elements that will allow the instructor to focus not only on simple trusses but also be able to teach heat conduction, basic principles in FEM, and even vibration to broaden the scope of analysis. The idea is one that allows our senior students to be exposed to FEM by combining most of what they have learned and show how it can be done with the help of this powerful technique of FEM. This has been very successful with our undergraduate students and first-year graduate students because they are able to use this textbook to learn the basic concepts required in analysis to be able to use finite element tools such as ANSYS, IDEAS, and CATIA, among others. The book is divided into 15 chapters and provides a unique balance of topics that cover design, 3D transformation and geometry manipulation, surface creations, solid modeling, optimization, finite elements, robotics and robot economics, and CAM implementation. Chapter 1 provides a historical perspective of CAD and discusses virtual reality as it is used in our current engineering environment (the latter is a topic that will need to be explored further down the road). Chapter 2 addresses the different stages in design and provides concrete examples showing how these steps can be accomplished. The unique feature of this chapter is the parametric and variational design concept. In this textbook I have made an effort to enlighten the students with the need for these techniques to be taken seriously as they might become standard in the near future. The blending of man and machine is an effective tool when CAD systems are allowed to participate in the design and manufacturing process by aiding in the problem formulation, synthesis, conceptualization, and, of course, analysis. Once the students have had some exposure to CAD in general, Chapter 2 could be covered at any part of the course. I urge the instructors and readers to take the time and go over these examples and to create their own examples to appreciate the benefits of these tools. Chapter 3 discusses 2D and 3D transformations and geometry manipulation, and provides an in-depth analysis of images in 2D and 3D, and includes isometric views. Chapter 4 explains the fundamentals underlying splines, parametric and nonparametric curves, and Bezier curves and surfaces. A number of examples are included to assist the students in understanding how the concepts are implemented. Depending on how advanced the students are, selected topics can be skipped or simply assigned as additional material for the class. Chapter 5 introduces the concept of solid modeling and the various construction techniques and representation schemes in modeling. The students will apply some of these concepts in their lab work working with the making of solid models in CAD. Chapter 6 covers various techniques of optimization and introduces the students to the basic concepts of how to formulate an objective function, define the appropriate constraints, and choose the analytical tools to solve the problem. This chapter also focuses on popular techniques in optimization so that senior students and first-year graduate students will have some familiarity with their use. Chapters 7 through 10 form a unique combination of teaching the finite element method to our junior and senior students without the burden of heavy calculus. It is one of the major strengths of this textbook. If a curriculum is more focused on analysis, all chapters can be covered; otherwise, the instructor is given the choice of covering FEM by selecting the appropriate topics) for the class. This would include stress analysis, heat conduction, dynamic analysis, and vibration, or simply teaching the basic formulation of FEM as described in Chapter 7. The examples solved in these chapters represent real applications and will encourage the students to develop a good appetite for FEM. Computer-aided manufacturing is introduced in Chapters 11 through 15. I have opted to focus on key topics of interest to the students such as robotics and economic impact, group technology, and computer-integrated manufacturing. These are some of the features that need to be understood in the integration of CAD and CAM. Principles of Computer-Aided Design and Manufacturingis written for junior and senior level students and first-year graduate students who have had little exposure to computer-aided design. This textbook assumes that the students have some experience with programming and understand basic concepts in CAD found in a freshman course of graphics. This textbook is suitable for students who have had all their undergraduate requirements in their major. The latter is an incentive whereby students will fully appreciate the benefits of design techniques such as parametric and variational design and develop a deep understanding of how FEM works and how it is applied to various engineering applications. I am indebted to the reviewers for their useful comments and suggestions, which helped shape the content and focus of this book: Dr. Heana Costea, California State University at Northridge; Derek M. Yip-Hoi, University of Michigan at Ann Arbor; and Gregory Kremer, Ohio State University. I would also like to thank Dr. M. Ayub, visiting professor in the Civil Engineering Department at University of Chicago at Illinois, for taking the time to edit several chapters and provide his insight for the book and M. Arif, associate professor in the Civil Engineering Department at University of Chicago at Illinois, for his encouragement and support. The comments and suggestions of the reviewers were instrumental in my final revision and in selecting additional topics that were missing from the original proposal. They kindly helped review my original manuscript and assisted me in looking at their course focus and syllabus to get a better picture of how the CAD course is taught at their respective institutions. Finally, I am indebted to all my students who have assisted me in the preparation of necessary materials for this book; without their help, this wouldn't have been possible. In particular, I would like to thank Carlos Lopez for his efforts on the parametric and variational designs section of the book. I also like to thank Francisco Romero, Nagarajan Chandra, Pedro Gonzalez, and David McNeil for their genuine effort in assisting with some of the graphics of the book. I would like to thank Nikhil Khulka and Ivan Zivkovic for being there when I needed them the most to meet the publisher deadlines and organize the chapters and figures selected for the book. I also would like to thank Surya Pratar for helping with indexing of this book. Finally, let me take this opportunity to thank the editorial staff, Dorothy Marrero, David George, and Lynda Castillo at Prentice Hall, for their patience during the course of the production of the book. I had the pleasure of working closely with Kevin Bradley at Sunflower Publishing Services, who oversaw the complete publication of the book. He was kind and very responsive to all my questions. He worked intelligently to make sure I was happy with the changes and the editing of my book. At the end I would like to thank my family, Ginger, Larby, and Anissa, for their unconditional love and support and for their understanding in the sacrifices we make in achieving our objectives. In particular, I would like to thank my mom and dad for giving me hope, guidance, and values to treasure for years to come. FARID AMIROUCHE The Department of Mechanical & Industrial Engineering University of Illinois, Chicago
Download or read book CAD82 written by Alan Pipes and published by Elsevier. This book was released on 2017-07-26 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAD82: 5th International Conference and Exhibition on Computers in Design Engineering is a collection of conference and review papers related to design engineering. The book, which is divided into 18 parts, covers papers on talking points in Computer-Aided Design (CAD), including micros in the design office, drafting systems, and introducing CAD into the industry. The text presents papers on building design, CAD/CAM, databases, education, electronics, geometric modeling, graphics, mechanical engineering, and structures. The book concludes by providing poster sessions that tackle topics, such as a formalized methodology in CAD, which provides a framework for exploring such design and performance relationships for multi-variable, multi-objective problems; a system for computer-aided architectural design; a technique for automatic interpretation; and a system of modeling three-dimensional roof forms. Design engineers and students taking CAD courses will find this book helpful.
Download or read book Computer Aided Design Engineering and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-08-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena organizations must continually strive to create new and better products faster, more efficiently, and more cost effectively than competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard, in all major industries. The seven volumes in Computer-Aided Design, Engineering, and Manufacturing: Systems Techniques, and Manufacturing provide a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.
Download or read book What Every Engineer Should Know about Computer Aided Design and Computer Aided Manufacturing written by John K. Krouse and published by CRC Press. This book was released on 1982-08-25 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes facets of CAD/CAM. Illustrates how each is tied together in an integrated system. Serves as a text for college-level courses in mechanical or manufacturing engineering; for professional in-house training programs & seminars.
Download or read book Computer Aided Design and Manufacture written by Great Britain. Advisory Council for Applied Research and Development and published by . This book was released on 1980 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: Report on the use of computer aided design in the UK - reviews computer aided design and draughting in mechanical and electrical engineering, as well as research and development activities, and includes recommendations urging appropriate UK industrial policies. Diagrams.
