Download or read book Development and Analysis of Models of a Supercharger written by Curtis C. Carroll and published by . This book was released on 2004 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: When attempting to model complicated systems, there are two strategies that can be used. One is to create a model that accounts for as many phenomena in the system as possible in order to yield precise results. The other is to identify the key phenomena that affect the overall output, and then develop a simplified model based on those phenomena. While the first method can give desirable outputs, development is resource intensive. The second strategy, though not capable of the accuracy of the first, is much more cost effective and can give quantitative answers that are just as valuable as detailed outputs. In regards to an automotive supercharger, the first method has already been employed to create a computational fluid dynamics (CFD) model of airflow through the system. The data generated from this model was analyzed and compared with measured data taken at identical conditions to determine if the CFD model was modeling the supercharger correctly, both in terms of airflow and sound generation. Also, a flow model for one portion of the supercharger cycle was developed using the key phenomena model approach. Results from this model were tested for accuracy against measured data. In addition, design applications for the second model were investigated, and a test of the effects of basic design changes conducted.

Download or read book Design and Analysis for the Development of a Small Supercharger Test Rig written by Keng Yong Ng and published by . This book was released on 2010 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 1D and Multi D Modeling Techniques for IC Engine Simulation written by Angelo Onorati and published by SAE International. This book was released on 2020-04-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1D and Multi-D Modeling Techniques for IC Engine Simulation provides a description of the most significant and recent achievements in the field of 1D engine simulation models and coupled 1D-3D modeling techniques, including 0D combustion models, quasi-3D methods and some 3D model applications.

Download or read book A Complete Guide to Street Supercharging written by Pat Ganahl and published by CarTech Inc. This book was released on 2009 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Street Supercharging, from industry veteran Pat Ganahl, has been the guidebook for supercharging fans for years, As time and technology march on, updates are required to keep things current, and that's exactly what this all new, all color edition of street supercharging does. Covered are blower basics, blower background and history, a tutorial on how blowers work, information on used superchargers and their practicality, chapters on the different styles of superchargers, like the traditional roots style blowers vs. the emerging centrifugal styles, blower installation, how to build your engine to handle the demands of a blower application, and even information on tweaking factory blower systems.

Download or read book Developing Tools to Understand and Predict Noise Phenomena in a Supercharger written by Nathanael A. Meyer and published by . This book was released on 2003 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: In design and development, products are often tested for improvement. Often measurements are taken but correlating these measurements to the physical phenomena present in the system can be a difficult task. Accurately attributing the measured data to the physical systems present in a system is imperative to design and development. In the case of an automotive supercharger, the design goal was a quieter and more efficient supercharger. Pressure measurements were taken at various points in the supercharger. First the data was placed in an animation of the supercharger, to get a "big picture" view of the system. Then, frequency analysis was performed on the measured pressure data and the frequency components were linked to the measured pressure. An equation for the airflow through the backflow slots in the supercharger was developed as a function of pressure, time, and initial temperature. Finally, predictive models where developed the flowrate through the backflow slots as a function of the supercharger's rotational rate (rpm) and the angle of the rotors within the supercharger.

Download or read book Two stage Supercharging written by Richard S. Buck and published by . This book was released on 1941 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: The arrangement of the parts and the installation and control problems of two-stage mechanically driven superchargers for aircraft engines are discussed. Unless an entirely new form of supercharger is developed, there will be a definite need for a two-stage centrifugal supercharger. It is shown that the two-stage mechanically driven supercharger itself is a comparatively simple device; the complications arise from the addition of intercoolers and controls.

Download or read book Supercharged Design Testing and Installation of Supercharger Systems written by Corky Bell and published by Robert Bentley, Incorporated. This book was released on 2002-01-07 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The supercharger has become a modern, environmentally friendly and powerful piece of bolt on equipment. For anyone interested in installing a system or just learning about them, this book is a must have.'

Download or read book Turbochargers and Turbocharging written by Evangelos G. Giakoumis and published by Nova Science Publishers. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercharging has long been established as the most successful means to maximise power output from a specific engine size. Through supercharging, the inlet air density is increased, usually by means of a compressor, and by doing so the amount of air trapped in the cylinders is increased accordingly. As a result, efficient burning of a proportionately higher amount of fuel is enabled. By far, the most successful version of supercharging is turbocharging. Here, the expansion in a turbine of the exhaust gases leaving the cylinders supplies the power needed to drive the compressor. At the moment, practically all diesel engines are turbocharged, with a continuously increasing penetration in the highly competitive market of SI-powered vehicles. The current book on turbochargers and turbocharging, comprising fifteen chapters, gathers important and novel research on many modern aspects of turbocharging for all kinds of gasoline and diesel-powered engine applications (automotive, truck, marine and aircraft). For example, characterisation of the value proposition of turbocharged vehicles, marine engines turbo-compounding, fundamental issues of turbocharger lag and its relation with engine-out PM emissions, variable geometric compressors, automotive two-stage turbocharging, and dynamic operation of turbochargers including VGT and surging effects are amongst the topics analysed. Review papers form a very important part of the book, namely the discussion and in-depth analysis of various automotive boosting systems, turbocharger reduced-order modeling, heat transfer and pulsating flows in turbomachinery, mathematical models for turbocharged engines, and turbomachine-based engine throttling. A considerable portion of the book (seven chapters) deals with control-oriented modeling techniques relating to the turbocharger and/or the whole engine power-plant. Such models have proven valuable during the design of both turbochargers and turbocharged engines, and are described and discussed in detail for a variety of automotive and aircraft applications. The book is written for post-graduate students, engineers and researchers in the field of internal combustion engines (diesel and SI) and turbochargers.

Download or read book One Dimensional Model and Pulse Generation of a Supercharger written by Martin Hardis and published by . This book was released on 2006 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reduced order model that captures the key aspects of a roots type supercharger has been developed. The goal of this reduced order model is to obtain the greatest computation speed for an acceptable accuracy. Key phenomena that dominate the response in the supercharger were identified first, and then implemented in the reduced order model. The reduced order model was developed based on one dimensional supercharger model from Sorenson. This model was then improved by adding backflow slot features (previously done by Carroll), a carryback slot, and finally a pressure pulse generated by the carryback slot. The output of this model, supercharger performance (volumetric and J1723 isentropic efficiency), was then compared with measured data from Eaton Corporation. The results agree after a supercharger wall temperature is increased with respect to the pressure ratio and rotor speed. This suggests that there is another heat generation source in the supercharger that has not been accounted for in the model, such as mechanical loss due to friction. A further investigation on the supercharger wall temperature needs to be conducted to verify this hypothesis. If the investigation results do not support this hypothesis, other source of heat generation in the supercharger should be investigated.

Download or read book Supercharging Performance Handbook written by Jeff Hartman and published by . This book was released on with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Simulation of a Supercharger written by Raymond Merala and published by . This book was released on 1987 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1965 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Turbocharging Supercharging written by Alan Allard and published by Motorbooks International. This book was released on 1986 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: A joint project of the Industrial Relations Section, Princeton University, and the Industrial Relations Section, Massachusetts Institute of Technology, as part of the Inter-University Study of Labor Problems in Economic Development.

Download or read book Common Rail Fuel Injection Technology in Diesel Engines written by Guangyao Ouyang and published by John Wiley & Sons. This book was released on 2019-06-18 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide-ranging and practical handbook that offers comprehensive treatment of high-pressure common rail technology for students and professionals In this volume, Dr. Ouyang and his colleagues answer the need for a comprehensive examination of high-pressure common rail systems for electronic fuel injection technology, a crucial element in the optimization of diesel engine efficiency and emissions. The text begins with an overview of common rail systems today, including a look back at their progress since the 1970s and an examination of recent advances in the field. It then provides a thorough grounding in the design and assembly of common rail systems with an emphasis on key aspects of their design and assembly as well as notable technological innovations. This includes discussion of advancements in dual pressure common rail systems and the increasingly influential role of Electronic Control Unit (ECU) technology in fuel injector systems. The authors conclude with a look towards the development of a new type of common rail system. Throughout the volume, concepts are illustrated using extensive research, experimental studies and simulations. Topics covered include: Comprehensive detailing of common rail system elements, elementary enough for newcomers and thorough enough to act as a useful reference for professionals Basic and simulation models of common rail systems, including extensive instruction on performing simulations and analyzing key performance parameters Examination of the design and testing of next-generation twin common rail systems, including applications for marine diesel engines Discussion of current trends in industry research as well as areas requiring further study Common Rail Fuel Injection Technology is the ideal handbook for students and professionals working in advanced automotive engineering, particularly researchers and engineers focused on the design of internal combustion engines and advanced fuel injection technology. Wide-ranging research and ample examples of practical applications will make this a valuable resource both in education and private industry.

Download or read book The Journal of the Society of Automotive Engineers written by Society of Automotive Engineers and published by . This book was released on 1926 with total page 1396 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Machine Design written by and published by . This book was released on 1995 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance Analysis of a Two lobed Roots Blower Supercharger written by Robert E. Maly and published by . This book was released on 2002 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: