Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975-04 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultrafine Grained Materials II written by Yuntian Theodore Zhu and published by John Wiley & Sons. This book was released on 2013-09-25 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing and Manufacturing Division (MPMD) and the Mechanical Behavior Committee (Jt. SMD/ASM-MSCTS) of the Structural Materials Division (SMD) of TMS (The Minerals, Metals & Materials Society) and held during the 2002 TMS Annual Meeting in Seattle, Washington February 17-21,2002.

Download or read book Mechanical Engineering in Biomedical Application written by Jay Prakash Srivastava and published by John Wiley & Sons. This book was released on 2024-01-02 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: MECHANICAL ENGINEERING IN BIOMEDICAL APPLICATIONS The book explores the latest research and developments related to the interdisciplinary field of biomedical and mechanical engineering offering insights and perspectives on the research, key technologies, and mechanical engineering techniques used in biomedical applications. The book is divided into several sections that cover different aspects of mechanical engineering in biomedical research. The first section focuses on the role of additive manufacturing technologies, rehabilitation in healthcare applications, and artificial recreation of human organs. The section also covers the advances, risks, and challenges of bio 3D printing. The second section presents insight into biomaterials, including their properties, applications, and fabrication techniques. The section also covers the use of powder metallurgy methodology and techniques of biopolymer and bio-ceramic coatings on prosthetic implants. The third section covers biofluid mechanics, including the mechanics of fluid flow within our body, the mechanical aspects of human synovial fluids, and the design of medical devices for fluid flow applications. The section also covers the use of computational modeling to study the blockage of carotid arteries. The final section elaborates on soft robotic manipulation for use in medical sciences. Audience The book provides practical insights and applications for mechanical engineers, biomedical engineers, medical professionals, and researchers working on the design and development of biomedical devices and implants.

Download or read book Ti Based Biomaterials written by Jarosław Jakubowicz and published by MDPI. This book was released on 2020-06-17 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, great attention has been paid to materials that can be used in the human body to prepare parts that replace failed bone structures. Of all materials, Ti-based materials are the most desirable, because they provide an optimum combination of mechanical, chemical, and biological properties. The successful application of Ti biomaterials has been confirmed mainly in dentistry, orthopedics, and traumatology. Titanium biocompatibility is practically the highest of all metallic biomaterials; however, new solutions are being sought to continuously improve their biocompatibility and osseointegration. Thus, the chemical modification of Ti results in the formation of new alloys or composites, which provide new perspectives for Ti biomaterials applications. This book covers broad aspects of Ti-based biomaterials concerning the design of their structure, mechanical, and biological properties. This book demonstrates that the new Ti-based compounds and their surface treatment provide the best properties for biomedical applications.

Download or read book Government Reports Index written by and published by . This book was released on 1973 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.

Download or read book Investigations and Applications of Severe Plastic Deformation written by Terry C. Lowe and published by Springer Science & Business Media. This book was released on 2000-04-30 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, Moscow, Russia, 2-7 August, 1999

Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 2004 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.

Download or read book Mechanical Alloying of Ferrous and Non Ferrous Alloys written by Shashanka Rajendrachari and published by Elsevier. This book was released on 2024-06-19 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth exploration of ferrous and non-ferrous alloys including various methods of preparation and production, their mechanical properties, and applications. The advantages of the mechanical alloying processing approach over other traditional powder metallurgical techniques is explained as are which alloys are best suited for this technique. Preparation steps, microstructures, properties, and applications for ferrous and non-ferrous alloys are compared, with insight on which alloys are best suited for preparation by alloying. The advantages and disadvantages of wet and dry milling are outlined. Processing, properties, and applications of high entropy alloys, ODS stainless steel, shape memory alloys, cermets, iron, copper, zinc, tungsten, aluminum, titanium, magnesium, and ceramic-based alloys are also covered, as are different powder preparation techniques and sintering methods. - Outlines the different types of mechanical alloying used to prepare powders, their mechanisms, factors affecting the process, and more - Covers the manufacturing, characteristics, and applications of high entropy alloys, ODS stainless steel, shape memory alloys, magnesium, ceramic-based alloys, and more - Compares preparation of ferrous and non-ferrous alloys, their microstructures, and properties - Discusses the advantages and disadvantages of wet and dry milling

Download or read book Design and Fabrication of Equal Channel Angular Extrusion Process Analysis for Non Ferrous Materials written by Perumalla Janaki Ramulu and published by Anchor Academic Publishing. This book was released on 2017 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Equal Channel Angular Extrusion” (ECAE) is a significant method in industrial forming applications, which is the most important method for the production of ultrafine grained bulk samples, where plastic strains are introduced into the bulk material without any changes in the cross section. ECAE has different die channel angles from which an optimum die channel angle should be identified so that efficient mechanical properties will be obtained. This study is focused on the plastic deformation behavior of Al alloys by modeling ECAE with experimental and finite element software. A solid model was generated using CATIA. The STL files of ECAE die generated in CATIA were used in DEFORM-3D for simulations. The experiments are performed by designing the ECAE tools such as die, punch and billet. A series of numerical experiments were carried out for the die angles of 115°, 125°and 135° and outer corner angle of 6°, using a billet diameter of 9mm and a height of 70mm. A detailed analysis of the strains introduced by ECAP (“Equal Channel Angular Pressing”) in a single passage through the die is noted. The experiments are conducted by attaching the ECAE tools to the Universal Testing Machine on aluminum alloy. The dimensions are followed for ECAE by taking considerations from the existing literature into account. On the basis of the experiment and simulation results, load, displacement, and punch force are evaluated and compared with each other.

Download or read book THERMEC 2011 written by Tara Chandra and published by . This book was released on 2012 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanocrystalline Titanium written by Halina Garbacz and published by Elsevier. This book was released on 2018-09-17 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocrystalline Titanium discusses the features of nanocrystalline titanium production by various SPD methods, also comparing their microstructure and properties. The authors characterize the physical, chemical and mechanical properties of ultrafine grained titanium, indicating which are crucial for their application. Titanium alloys are characterized by high specific strength combined with excellent corrosion resistance, whereas the mechanical properties of pure (or commercial purity - CP) titanium are much lower. SPD methods are proving to be an effective way to increase strength, even to a level typical for structural titanium alloys. This book is useful for academics and professionals studying the behavior of metallic materials. - Discusses various SPD techniques and their applications for titanium - Previews the limitations of SPD methods for titanium, along with the problems that can be encountered during production - Characterizes the physical, chemical and mechanical properties of ultrafine grained titanium and indicates which are crucial for its production applications

Download or read book Innovations in Materials Chemistry Physics and Engineering Research written by de Silva, Eugene and published by IGI Global. This book was released on 2023-09-25 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in Materials Chemistry, Physics, and Engineering Research is an all-encompassing book edited by Eugene de Silva, the Head of Multi-disciplinary Research in Applied Science (MRAS), and Pramudi Abeydeera, a prominent figure in polymer chemistry. The book explores the latest research and innovations in materials chemistry, physics, engineering, and other related areas. It seeks to inform researchers, policymakers, and the wider public about the most recent theoretical and experimental research in the field. The book covers many topics, including the fundamental mechanisms of reactions, applications, synthesis, properties, and innovations in materials chemistry. It also contains critical reviews of past and current research, which provides the reader with a comprehensive understanding of the subject matter. By doing so, the book promotes collaborative research by facilitating the sharing of information and directing research toward new avenues in research and industrial development. It is an indispensable resource for universities, colleges, research centers, and industries. This book is particularly relevant for polymer scientists who find the latest research on materials chemistry, physics, engineering, and allied fields beneficial for their research endeavors.

Download or read book Ultra Fine Grained Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2009-04-08 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses results of the New Generation Iron and Steel Materials research project funded over the last ten years. It thoroughly describes theoretical achievements in ultra-fine grain steel and its refinement. It also discusses progress in related areas of engineering and technology. The author has been engaged in the research of new generation structural materials for the last twelve years being Chief Scientist of three national research programs in China.

Download or read book Metallic Biomaterial Interfaces written by Jürgen Breme and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clearly divided into three sections on the interface influence of materials and surface modifications, the physical and physicochemical surface characterization, and the biological characterization of the interface and biosystem reactions, this book is the first to concentrate on the highly important area of metal-based implants and their improved functionality and acceptance by the body.