Download or read book Determination of the Accuracy of Residual Stress Measurement Methods written by Tendai Chipanga and published by LAP Lambert Academic Publishing. This book was released on 2010-12 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book appeals to an audience in the engineering field specifically Mechanical Engineering. Professional design engineers will find this work useful in the estimation of the magnitudes of residual stresses in components and correctly account for them when determining factors of safety. Destructive and non-destructive technicians will find it helpful in the condition monitoring of plant and equipment while a basis for researchers is laid to pursue further work.The book focuses on the measurements of displacements, time of flight/ultrasonic velocity and strains in steel specimens which subsequently prompts the calculation of stresses. The following methods are covered; Hole Drilling, Ultrasonic (Debro-30) System and Digital Shearography. Emphasis is laid on the experimental procedures and the analysis of the results thereof. A novel technique of quantifying residual stresses using shearograms obtained from Digital Shearography experimental data is proposed. This however warrants further investigations that require independent verification stress measurement methods.

Download or read book Practical Residual Stress Measurement Methods written by Gary S. Schajer and published by John Wiley & Sons. This book was released on 2013-08-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory and intermediate level handbook written in pragmatic style to explain residual stresses and to provide straightforward guidance about practical measurement methods. Residual stresses play major roles in engineering structures, with highly beneficial effects when designed well, and catastrophic effects when ignored. With ever-increasing concern for product performance and reliability, there is an urgent need for a renewed assessment of traditional and modern measurement techniques. Success critically depends on being able to make the most practical and effective choice of measurement method for a given application. Practical Residual Stress Measurement Methods provides the reader with the information needed to understand key residual stress concepts and to make informed technical decisions about optimal choice of measurement technique. Each chapter, written by invited specialists, follows a focused and pragmatic format, with subsections describing the measurement principle, residual stress evaluation, practical measurement procedures, example applications, references and further reading. The chapter authors represent both international academia and industry. Each of them brings to their writing substantial hands-on experience and expertise in their chosen field. Fully illustrated throughout, the book provides a much-needed practical approach to residual stress measurements. The material presented is essential reading for industrial practitioners, academic researchers and interested students. Key features: • Presents an overview of the principal residual stress measurement methods, both destructive and non-destructive, with coverage of new techniques and modern enhancements of established techniques • Includes stand-alone chapters, each with its own figures, tables and list of references, and written by an invited team of international specialists

Download or read book Determination of the Accuracy of Non destructive Residual Stress Measurements Methods written by Tendai Chipanga and published by . This book was released on 2009 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Residual Stress Measurement and the Slitting Method written by Weili Cheng and published by Springer Science & Business Media. This book was released on 2007-02-24 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides complete coverage of the slitting method. It details new results in analysis, computation, and estimation and discusses different roles of residual stresses from the fracture mechanics perspective. It provides detailed formulations and examples of compliance functions, weighted least squares fit and convergence test in stress estimation, and computer programs to facilitate the implementation of the slitting method.

Download or read book New Challenges in Residual Stress Measurements and Evaluation written by Caterina Casavola and published by BoD – Books on Demand. This book was released on 2020-07-22 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses (RS) are stresses present inside materials even in the absence of any applied load. They are of capital importance because they can impact greatly on the mechanical strength of the material, on its dimensional correspondence to design specifications as well as on the fatigue life of the part. RS measurement and evaluation is currently an important research topic where a lot of challenges still need to be addressed. This book aims to provide the reader with an overview of the principal novelties in this field including current limitations and potential future developments. Both radically new experimental approaches as well as recent evolutions of consolidated ones will be presented, along with the latest novelties in the area of numerical residual stress evaluation.

Download or read book Methods of Residual Stress Measurement written by and published by . This book was released on 1965 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual has been assembled as a ready reference source for the engineer who must measure residual stresses. Although the literature has abundant information on the individual methods of residual stress measurement, this manual is unique in that most of the useful methods have been selected, described, classified, and compared.Methods of measuring residual stress may be classified as mechanical, physical, or chemical. Mechanical methods that are most widely used involve the machining of the part to release the residual stresses. These methods are considered in detail and occupy the bulk of this manual.Of the physical methods, x-ray diffraction has many advantages in solving some residual stress problems. One of the major advantages is that it is completely nondestructive if only surface residual stresses are desired. This method is briefly described and its limitations discussed so that the investigator may choose this method if it fulfills his needs. The method and the necessary techniques have been covered in detail in Ref. 1.Of the chemical methods, the stress corrosion cracking technique seems to be the most useful. This cracking is known to be dependent upon the surface tensile stress level. At present it is only a qualitative measure of the stress, but perhaps at some future date, quantitative chemical methods may be developed.To make residual stress measurements, the engineer must: 1Select the most appropriate method. 2Completely familiarize himself with the theory behind the method chosen. 3Learn the techniques of measurement used by previous investigators.Note that the word "method" is reserved to mean the individual category of stress analysis, and that "technique" applies to the experimental procedure.The choice of the method depends to a large extent upon the geometry of the specimen, the precision desired, the type and location of the stress it is desired to measure, and the equipment available. The numerous mechanical methods available are classified into four groups. These are: the parting-out method, the layer removal method, the boring and turning method, and the hole drilling method. The nonmechanical x-ray method is briefly discussed here for comparison.Once the method has been selected, measurements should not be taken and their values blindly substituted into equations. Each term in the expressions relating the deformation to the residual stress should be completely understood and the sign convention used for these terms should be well known. For this reason, a derivation for each method has been included with the necessary assumptions and limitations. Following a study of these equations, it may be decided whether some automatic or computer technique should be used. In some instances in which a large number of specimens are to be analyzed, the computer technique offers obvious advantages. At this point, it is also necessary to determine the precision with which the stresses are to be determined. This, of course, can be related directly to the precision used in the measurement of the deformation changes and the original dimensions of the specimen itself.The correct choice of the many and varied techniques for measuring dimensional changes used in the determination of residual stress is extremely important if accurate and reproducible data are to be obtained. Machining stress introduced in dissecting must not be larger or more significant than the stress that is to be measured. The techniques used to remove material are numerous, and some of the better currently used techniques are considered. The specific techniques associated with any particular method are included and special fixtures and procedures are described and sample calculations are given.

Download or read book Handbook of Measurement of Residual Stresses written by Society for Experimental Mechanics (U.S.) and published by . This book was released on 1996 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from 24 authorities from around the world, this handbook provides the most authoritative reference resource available on the impact of residual stresses on mechanical properties of materials and structures. You'll find detailed descriptions of a full range of measuring techniques, including hole drilling, layer removal, sectioning, X-ray diffraction, neutron diffraction, and ultrasonic methods. A variety of case studies which illustrate use of specific techniques are included to facilitate your understanding. Design and structural engineers, metallurgists, and material scientists will find a wealth of valuable information covering recent developments in residual stress measuring techniques, with guidelines provided for selecting the right measuring strategy for each specific application, and many helpful tips for improving quality control.

Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, light-weight materials such as composites and their wide range of applications in the aerospace and automotive industries, in civil infrastructure and in sporting applications, it is critical that the residual stresses of composite materials are understood and measured correctly.The first part of this important book reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. Various mathematical (analytical and numerical) methods for calculation of residual stresses in composite materials are also presented. Chapters in the first section of the book discuss the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses residual stresses in polymer matrix, metal-matrix and a range of other types of composites. Moreover, the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses is discussed.Residual stresses in composite materials provides a comprehensive overview of this important topic, and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine and sporting industries. - Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses - Discusses residual stresses in polymer matrix, metal-matrix and other types of composite - Considers the addition of nanoparticles to the matrix of polymeric composites as a new technique for reduction of residual stresses

Download or read book International Conference on Residual Stresses written by G. Beck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1043 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residual stresses are always introduced in materials when they are produced, or when they undergo non-uniform plastic deformation during use. The circumstances that can cause residual stresses are therefore numerous. Residual stresses exist in all materials and, depending on their distribution, can playa beneficial role (for example, compressive surface stress) or have a catastrophic effect, especially on fatigue behaviour and corrosion properties. The subject of residual stresses took form around 1970 with the development of methods to measure macroscopic deformations during the machining of materials or on an atomic scale by X-ray diffraction. These techniques have made considerable progress in the last 20 years. The meetings organized in several countries (Germany, France, Japan, etc. ) have largely contributed to this progress, aided by the numerous exchanges of information and knowledge to which they have given rise. Studies of the formation of residual stresses began more slowly, but have progressed with the emergence of increasingly realistic models of materials behaviour and with access to ever more powerful codes for numerical calculations. Two successive meetings for discussing this topic have been held in Europe. The first, held in 1982 in Nancy (France), consisted of 30 participants from 5 countries. The second was held in Linkoping (Sweden) in 1984, with 80 participants of 16 nationalities. It was decided to hold a first International Conference, ICRS, to address all aspects of the problem. Held in 1986 in Garmisch-Partenkirschen (FRG), it was an assembly of neady 300 participants from 21 countries.

Download or read book Hole Drilling Method for Measuring Residual Stresses written by Gary S. and published by Springer Nature. This book was released on 2022-05-31 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the theory and practice of the Hole-Drilling Method for measuring residual stresses in engineering components. Such measurements are important because residual stresses have a "hidden" character because they exist locked-in within a material, independent of any external load. These stresses are typically created during component manufacture, for example, during welding, casting, or forming. Because of their hidden nature, residual stresses are difficult to measure and consequently are often ignored. However, they directly add to loading stresses and can cause catastrophic failure if not properly included during engineering design. Thus, there is an urgent need to be able to identify and measure residual stresses conveniently and reliably. The Hole-Drilling Method provides an adaptable and well-proven method for measuring residual stresses in a wide range of materials and component types. It is convenient to use and gives reliable results. Because of the hidden nature of residual stresses, the measurement method must necessarily be indirect, thus, additional care and conceptual understanding are necessary to achieve successful results. This book provides a practical introduction to the Hole-Drilling Method, starting from its historical roots and going on to focus on its modern practice. The various chapters describe the nature of residual stresses, the principle of hole-drilling measurements, procedures and guidance on how to make successful measurements, and effective mathematical procedures for stress computation and analysis. The book is intended for practitioners who need to make residual stress measurements either occasionally or routinely, for practicing engineers, for researchers, and for graduate engineering and science students.

Download or read book Practical Residual Stress Measurement Methods written by Gary S. Schajer and published by John Wiley & Sons. This book was released on 2013-09-23 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory and intermediate level handbook written in pragmatic style to explain residual stresses and to provide straightforward guidance about practical measurement methods. Residual stresses play major roles in engineering structures, with highly beneficial effects when designed well, and catastrophic effects when ignored. With ever-increasing concern for product performance and reliability, there is an urgent need for a renewed assessment of traditional and modern measurement techniques. Success critically depends on being able to make the most practical and effective choice of measurement method for a given application. Practical Residual Stress Measurement Methods provides the reader with the information needed to understand key residual stress concepts and to make informed technical decisions about optimal choice of measurement technique. Each chapter, written by invited specialists, follows a focused and pragmatic format, with subsections describing the measurement principle, residual stress evaluation, practical measurement procedures, example applications, references and further reading. The chapter authors represent both international academia and industry. Each of them brings to their writing substantial hands-on experience and expertise in their chosen field. Fully illustrated throughout, the book provides a much-needed practical approach to residual stress measurements. The material presented is essential reading for industrial practitioners, academic researchers and interested students. Key features: • Presents an overview of the principal residual stress measurement methods, both destructive and non-destructive, with coverage of new techniques and modern enhancements of established techniques • Includes stand-alone chapters, each with its own figures, tables and list of references, and written by an invited team of international specialists

Download or read book Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation written by M.E. Fitzpatrick and published by CRC Press. This book was released on 2003-02-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: While residual stress can be a problem in many industries and lead to early failure of component, it can also be introduced deliberately to improve lifetimes. Knowledge of the residual stress state in a component can be critical for quality control of surface engineering processes or vital to performing an accurate assessment of component life unde

Download or read book Residual stress analysis in polymer materials using the hole drilling method basic principles and applications written by Arnaud Magnier and published by kassel university press GmbH. This book was released on 2018-12-17 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Residual Stress Analysis on Welded Joints by Means of Numerical Simulation and Experiments written by Paolo Ferro and published by BoD – Books on Demand. This book was released on 2018-05-16 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to quantify residual stresses induced by welding processes through experimentation or numerical simulation has become, today more than ever, of strategic importance in the context of their application to advanced design. This is an ongoing challenge that commenced many years ago. Recent design criteria endeavour to quantify the effect of residual stresses on fatigue strength of welded joints to allow a more efficient use of materials and a greater reliability of welded structures. The aim of the present book is contributing to these aspects of design through a collection of case-studies that illustrate both standard and advanced experimental and numerical methodologies used to assess the residual stress field in welded joints. The work is intended to be of assistance to designers, industrial engineers and academics who want to deepen their knowledge of this challenging topic.

Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.

Download or read book Accuracy Evaluation of Residual Stress Measurements written by and published by . This book was released on 1996 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accuracy of residual stress measurement techniques is difficult to assess due to the lack of available reference standards. To satisfy the need for reference standards, two specimens were designed and developed to provide known stress magnitudes and distributions: one with a uniform stress distribution and one with a nonuniform linear stress distribution. A reusable, portable load fixture was developed for use with each of the two specimens. Extensive bench testing was performed to determine if the specimens provide desired known stress magnitudes and distributions and stability of the known stress with time. The testing indicated that the nonuniform linear specimen and load fixture provided the desired known stress magnitude and distribution but that modifications were required for the uniform stress specimen. A trial use of the specimens and load fixtures using hole drilling was successful.

Download or read book Residual Stresses 2018 written by Marc Seefeldt and published by Materials Research Forum LLC. This book was released on 2018-10-10 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Conference on Residual Stresses (ECRS) series is the leading European forum for scientific exchange on internal and residual stresses in materials. It addresses both academic and industrial experts and covers a broad gamut of stress-related topics from instrumentation via experimental and modelling methodology up to stress problems in specific processes such as welding or shot-peening, and their impact on materials properties. Chapters: Diffraction Methods; Mechanical Relaxation Methods; Acoustic and Electromagnetic Methods; Composites, Nano and Microstructures; Films, Coatings and Oxides; Cold Working and Machining; Heat Treatments and Phase Transformations; Welding, Fatigue and Fracture: Stresses in Additive Manufacturing.