Download or read book Determination of Stress Intensity Factors for Interface Cracks Under Mixed mode Loading written by and published by . This book was released on 1992 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Calculation of Stress Intensity Factors for Interface Cracks Under Mixed Mode Loading written by RA. Naik and published by . This book was released on 1994 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: A simple technique was developed using conventional finite element analysis to determine stress intensity factors (K1 and K2) for interface cracks under mixed-mode loading. This technique involves the calculation of crack-tip stresses using nonsingular finite elements. These stresses are then combined and used in a linear regression procedure to calculate K1 and K2. The technique was demonstrated by calculating K1 and K2 for three different bimaterial combinations.

Download or read book Problems of mixed mode crack propagation written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is not just another book on fracture mechanics. In recent years, there have been many books published on this subject in an attempt to assess the state of the art and its applications. The majority of the work dealt with energy release rate or critical stress intensity factor and is applicable only to fracture toughness testing. The main reason for this restriction is that the energy release concept cannot easily be extended to mixed mode fracture that occurs in practice as the rule rather than the exception. Cracks will normally curve or turn because the direction of loading can change as a function of time. Their directions of growth cannot be assumed as an a priori and must be determined from a pre-assumed criterion. Analysts are still perplexed with selecting an appropriate fracture criterion because it requires much discernment and judgement. Criteria which often appeared valid for idealized situations are quickly dis credited when encountering more complex physical phenomena. Moreover, the claim of generality cannot be justified on the basis of agreement between theory and experiment for a few simple examples.

Download or read book Three Dimensional Crack Problems written by M.K. Kassir and published by Springer. This book was released on 1975-04-30 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fracture of Functionally Graded Materials written by G.H. Paulino and published by Elsevier. This book was released on 2002-10-23 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific research on functionally graded materials (FGM's) looks at functions of gradients in materials comprising thermodynamic, mechanical, chemical, optical, electromagnetic, and/or biological aspects. This collection of technical papers represents current research interests with regard to the fracture behaviour of FGM's. The papers provide a balance between theoretical, computational, and experimental techniques. It also indicates areas for increased development, such as constraint effects, full experimental characterization of engineering FGM's under static and dynamic loading, development of fracture criteria with predictive capability, multiphysics and multiscale failure considerations, and connection of research with industrial applications.

Download or read book Metal Ceramic Interfaces written by M. Rühle and published by Elsevier. This book was released on 2013-10-22 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: As engineering materials and structures often contain a metal or metallic alloy bonded to a ceramic, the resultant interface must be able to sustain mechanical forces without failure. They also play an important role in oxidation or reduction of materials. The workshop on 'Bonding, Structure and Mechanical Properties of Metal/Ceramic Interfaces' was held in January 1989 within the Acta/Scripta Metallurgica conference series. It drew together an international collection of 70 scientists who discussed a wide range of issues related to metal-ceramic interfaces. The sessions were divided into 7 categories: structure and bonding, chemistry at interfaces, formation of interfaces, structure of interfaces, thermodynamics/atomistics of interface fracture, mechanics of interface cracks, and fracture resistance of bimaterial interfaces. Within these headings attention was paid to grain boundaries, the influence of chemical processes on the behaviour of interfaces, diffusion bonding, characterization of fracture, and crack propagation by fatigue and by stress corrosion. The book presents a useful reference source for materials scientists, physicists, chemists, and mechanical engineers who are concerned with the roles and properties of interfaces.

Download or read book Fracture Mechanics written by John D. Landes and published by ASTM International. This book was released on 1994 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mixed mode Crack Behavior written by Keith John Miller and published by ASTM International. This book was released on 1999 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stress Intensity Factors Handbook written by Yukitaka Murakami and published by . This book was released on 1987 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computation of Singular Solutions in Elliptic Problems and Elasticity written by D. Leguillon and published by John Wiley & Sons. This book was released on 1987 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stress field in composite elastic media often contains singularities, in particular at the intersections of interfaces with boundaries. This book describes two new methods of computing the eigenvalues and eigenvectors of singularities, leading to a full description of their structure.

Download or read book Determination of Stress Intensity Factor Distributions for Interface Cracks in Incompressible Dissimilar Materials written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-02 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present study was undertaken in order to develop test methods and procedures for measuring the variation of the stress intensity factor through the thickness in bimaterial specimens containing cracks within and parallel to the bond line using the frozen stress photoelastic method. Since stress freezing materials are incompressible above critical temperature, and since thick plates are to be employed which tend to produce a state of plane strain near the crack tip, the interface near tip fracture equations reduce to the classic form for homogeneous materials. Moreover, zero thickness interfaces do not exist when materials are bonded together. It was decided early on that it would be important to insure a uniform straight and accurate crack tip region through the thickness of the body to reduce scatter in the SIF distribution through the thickness. It was also observed that rubberlike materials which were desired to be modeled exhibited significant tip blunting prior to crack extension and that some blunting of the tip would provide a more realistic model. It should be noted that, in normal stress freezing photoelastic work, it is considered good practice to avoid utilizing data near bond lines in photoelastic models due to the bond line stresses which inevitably develop when two parts are bonded together. Thus, the present study involves certain exploratory aspects in deviating from standard practice in stress freezing work. With the above ideas in mind, several different test methods were investigated and are described in the following sections and appendices. The geometry selected for the program was a thick, edge cracked specimen containing a bond line. Smith, C. W. Langley Research Center NAG1-1622...

Download or read book Stress Intensity Factors and Weight Functions written by Theo Fett and published by Computational Mechanics. This book was released on 1997 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the authors describe methods for the calculation of weight functions. In the first part they discuss the accuracy and convergence behaviour of methods for one- and two-dimensional cracks, while in the second part they provide solutions for cracks subjected to mode-I and mode-II loading.

Download or read book Problems of Fracture Mechanics and Fatigue written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: On Fracture Mechanics A major objective of engineering design is the determination of the geometry and dimensions of machine or structural elements and the selection of material in such a way that the elements perform their operating function in an efficient, safe and economic manner. For this reason the results of stress analysis are coupled with an appropriate failure criterion. Traditional failure criteria based on maximum stress, strain or energy density cannot adequately explain many structural failures that occurred at stress levels considerably lower than the ultimate strength of the material. On the other hand, experiments performed by Griffith in 1921 on glass fibers led to the conclusion that the strength of real materials is much smaller, typically by two orders of magnitude, than the theoretical strength. The discipline of fracture mechanics has been created in an effort to explain these phenomena. It is based on the realistic assumption that all materials contain crack-like defects from which failure initiates. Defects can exist in a material due to its composition, as second-phase particles, debonds in composites, etc. , they can be introduced into a structure during fabrication, as welds, or can be created during the service life of a component like fatigue, environment-assisted or creep cracks. Fracture mechanics studies the loading-bearing capacity of structures in the presence of initial defects. A dominant crack is usually assumed to exist.

Download or read book Calculation of Stress Intensity Factors for Cracks in Structural and Mechanical Components Subjected to Complex Stress Fields written by Z. Wu and published by . This book was released on 2004 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the difficulties in using fracture mechanics is in determining stress intensity factors of cracked structural and mechanical components. The cracks are often subjected to complex stress fields induced by external loads and residual stresses resulting from the surface treatment. Both stress fields are characterized by non-uniform distributions, and handbook stress intensity factor solutions are seldom available in such cases. The method presented below is based on the generalized weight function technique enabling the stress intensity factors to be calculated for any Mode I loading applied to a planar semi-elliptical surface crack. The stress intensity factor can be determined at any point on the crack tip contour by using the general weight function. The calculation is carried out by integrating the product of the stress field and the weight function over the crack area.

Download or read book Fracture Mechanics of Concrete written by Surendra P. Shah and published by John Wiley & Sons. This book was released on 1995-09-28 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: FRACTURE MECHANICS OF CONCRETE AND ROCK This book offers engineers a unique opportunity to learn, frominternationally recognized leaders in their field, about the latesttheoretical advances in fracture mechanics in concrete, reinforcedconcrete structures, and rock. At the same time, it functions as asuperb, graduate-level introduction to fracture mechanics conceptsand analytical techniques. Reviews, in depth, the basic theory behind fracture mechanics * Covers the application of fracture mechanics to compressionfailure, creep, fatigue, torsion, and other advanced topics * Extremely well researched, applies experimental evidence ofdamage to a wide range of design cases * Supplies all relevant formulas for stress intensity * Covers state-of-the-art linear elastic fracture mechanics (LEFM)techniques for analyzing deformations and cracking * Describes nonlinear fracture mechanics (NLFM) and the latestRILEM modeling techniques for testing nonlinear quasi-brittlematerials * And much more Over the past few years, researchers employing techniques borrowedfrom fracture mechanics have made many groundbreaking discoveriesconcerning the causes and effects of cracking, damage, andfractures of plain and reinforced concrete structures and rock.This, in turn, has resulted in the further development andrefinement of fracture mechanics concepts and tools. Yet, despitethe field's growth and the growing conviction that fracturemechanics is indispensable to an understanding of material andstructural failure, there continues to be a surprising shortage oftextbooks and professional references on the subject. Written by two of the foremost names in the field, FractureMechanics of Concrete fills that gap. The most comprehensive bookever written on the subject, it consolidates the latest theoreticalresearch from around the world in a single reference that can beused by students and professionals alike. Fracture Mechanics of Concrete is divided into two sections. In thefirst, the authors lay the necessary groundwork with an in-depthreview of fundamental principles. In the second section, theauthors vividly demonstrate how fracture mechanics has beensuccessfully applied to failures occurring in a wide array ofdesign cases. Key topics covered in these sections include: * State-of-the-art linear elastic fracture mechanics (LEFM)techniques for analyzing deformations and cracking * Nonlinear fracture mechanics (NLFM) and the latest RILEM modelingtechniques for testing nonlinear quasi-brittle materials * The use of R-Curves to describe cracking and fracture inquasi-brittle materials * The application of fracture mechanics to compression failure,creep, fatigue, torsion, and other advanced topics The most timely, comprehensive, and authoritative book on thesubject currently available, Fracture Mechanics of Concrete is botha complete instructional tool for academics and students instructural and geotechnical engineering courses, and anindispensable working resource for practicing engineers.

Download or read book Modelling Rock Fracturing Processes written by Baotang Shen and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text book provides the theoretical background of rock fracture mechanics and displacement discontinuity methods used for the modelling of geomechanical problems. The computer program FRACOD is used to analyse the fracture problems, assessing fracture initiation and propagation in tension (Mode I), shear (Mode II) and mixed mode I and II of solid intact or jointed geomaterials. The book also presents the fundamentals of thermo-mechanical coupling and hydro-mechanical coupling. Formulations of multiple regional mechanical, thermal and hydraulic functions, which allow analyses of fracture mechanics problems for structures made of brittle, rock-like materials, are provided. In addition, instructive examples of code verification and applications are presented. Additional material: The 2-D version of the FRACOD program, a manual on the program and a wealth of verification examples of classical problems in physics, mechanics and hydromechanics are available at http://extras.springer.com. A large number of applications related to civil, mining, petroleum and environmental engineering are also included. - The first textbook available on modelling of rock fracture propagation - Introduces readers to the fundamentals of rock fracturing - Uses a modern style of teaching with theory, mathematical modelling and applications in one package - The basic version of the FRACOD software, manual, verification examples and applications are available as additional material - The FRACOD program and manual enable the readers to solve fracture propagation problems on their own --------------------------- Ki-Bok Min, Department of Energy Resources Engineering, College of Engineering, Seoul National University, Korea “Challenging rock engineering applications require extreme conditions of stress, temperature and hydraulic pressure resulting in rock fracturing to a various extent. The FRACOD is one of few computer codes available in engineering rock mechanics that can simulate the initiation and propagation of fractures often interacting with natural fractures. Its capability has been significantly enhanced to include the hydraulic and thermal fracturing with concerted interaction from multi-national research and industry partners. My experience with the FRACOD is very positive and I am certain that its already-excellent track record will expand further in the future."

Download or read book Fracture mechanics of concrete Structural application and numerical calculation written by George C. Sih and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete has traditionally been known as a material used widely in the construction of roads, bridges and buildings. Since cost effectiveness has always been one of the more important aspects of design, concrete, when reinforced and/or prestressed, is finding more use in other areas of application such as floating marine structures, storage tanks, nuclear vessel containments and a host of other structures. Because of the demand for concrete to operate under different loading and environmen tal conditions, increasing attention has been paid to study concrete specimens and structure behavior. A subject of major concern is how the localized segregation of the constituents in concrete would affect its global behavior. The degree of nonhomogeneity due to material property and damage. by yielding and/or cracking depends on the size scale and loading rate under consideration. Segregation or clustering of aggregates at the macroscopic level will affect specimen behavior to a larger degree than it would to a large structure such as a dam. Hence, a knowledge of concrete behavior over a wide range of scale is desired. The parameters governing micro-and macro-cracking and the techniques for evaluating and observing the damage in concrete need to be better understood. This volume is intended to be an attempt in this direction. The application of Linear Elastic Fracture Mechanics to concrete is discussed in several of the chapters.