Download or read book Designing with Geosynthetics 6Th Edition Vol 1 written by Robert M. Koerner and published by Xlibris Corporation. This book was released on 2012-01-16 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the structure of previous editions, Volume 1 of this Sixth Edition proceeds through four individual chapters on geosynthetics, geotextiles, geogrids and geonets. Volume 2 continues with geomembranes, geosynthetic clay liners, geofoam and geocomposites. The two volumes must accompany one another. All are polymeric materials used for myriad applications in geotechnical, geoenvironmental, transportation, hydraulic and private development applications. The technology has become a worldwide enterprise with approximate $5B material sales in the 35-years since first being introduced. In addition to describing and illustrating the various materials; the most important test methods and design examples are included as pertains to specific application areas. This latest edition differs from previous ones in that sustainability is addressed throughout, new material variations are presented, new applications are included and references are updated accordingly. Each chapter includes problems for which a solutions manual is available.
Download or read book Designing with Geosynthetics written by Robert M. Koerner and published by . This book was released on 1990 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geosynthetic materials have entered the mainstream in the professional arena and are no longer considered new construction material. Professionals need to keep up with the nuances of how geosynthetics work. Emphasizes design by function; overviews all types of geosynthetics, with stand-alone units on particular materials. Uses S.I. units for all problems and examples. Expands coverage of containers and tubes in the geotextile chapter. Discusses walls and slope design, including seismic analysis, in the geogrid chapter. Treats wet landfills, agricultural waste, waste stability, and dam waterproofing in the geomembrane chapter. Discusses new products and related performances in the geosynthetic clay liner chapter. Discusses new products and related behavior, including fiber reinforcement and wall drainage, in the geocomposite chapter. Adds a completely new chapter on geofoam. A useful reference for transportation, geotechnical, environmental, and hydraulics professionals and engineers.
Download or read book Designing with Geosynthetics 6Th Edition Vol2 written by Robert M. Koerner and published by Xlibris Corporation. This book was released on 2012-01-16 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the structure of previous editions, Volume 2 of this Sixth Edition proceeds through four individual chapters on geomembranes, geosynthetic clay liners, geofoam and geocomposites. The two volumes must accompany one another. Volume 1 contains geosynthetics, geotextiles, geogrids and geonets. The two volumes must accompany one another. All are polymeric materials used for myriad applications in geotechnical, geoenvironmental, transportation, hydraulic and private development applications. The technology has become a worldwide enterprise with approximate $5B material sales in the 35-years since first being introduced. In addition to describing and illustrating the various materials; the most important test methods and design examples are included as pertains to specific application areas. This latest edition differs from previous ones in that sustainability is addressed throughout, new material variations are presented, new applications are included and references are updated accordingly. Each chapter includes problems for which a solutions manual is available.
Download or read book Principles and Practice of Ground Improvement written by Jie Han and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain a stronger foundation with optimal ground improvement Before you break ground on a new structure, you need to analyze the structure of the ground. Expert analysis and optimization of the geo-materials on your site can mean the difference between a lasting structure and a school in a sinkhole. Sometimes problematic geology is expected because of the location, but other times it's only unearthed once construction has begun. You need to be able to quickly adapt your project plan to include an improvement to unfavorable ground before the project can safely continue. Principles and Practice of Ground Improvement is the only comprehensive, up-to-date compendium of solutions to this critical aspect of civil engineering. Dr. Jie Han, registered Professional Engineer and preeminent voice in geotechnical engineering, is the ultimate guide to the methods and best practices of ground improvement. Han walks you through various ground improvement solutions and provides theoretical and practical advice for determining which technique fits each situation. Follow examples to find solutions to complex problems Complete homework problems to tackle issues that present themselves in the field Study design procedures for each technique to simplify field implementation Brush up on modern ground improvement technologies to keep abreast of all available options Principles and Practice of Ground Improvement can be used as a textbook, and includes Powerpoint slides for instructors. It's also a handy field reference for contractors and installers who actually implement plans. There are many ground improvement solutions out there, but there is no single right answer to every situation. Principles and Practice of Ground Improvement will give you the information you need to analyze the problem, then design and implement the best possible solution.
Download or read book Designing with Geosynthetics written by Robert M. Koerner and published by Xlibris. This book was released on 2012 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the structure of previous editions, Volume 1 of this Sixth Edition proceeds through four individual chapters on geosynthetics, geotextiles, geogrids and geonets. Volume 2 continues with geomembranes, geosynthetic clay liners, geofoam and geocomposites. The two volumes must accompany one another. All are polymeric materials used for myriad applications in geotechnical, geoenvironmental, transportation, hydraulic and private development applications. The technology has become a worldwide enterprise with approximate $5B material sales in the 35-years since first being introduced. In addition to describing and illustrating the various materials; the most important test methods and design examples are included as pertains to specific application areas. This latest edition differs from previous ones in that sustainability is addressed throughout, new material variations are presented, new applications are included and references are updated accordingly. Each chapter includes problems for which a solutions manual is available.
Download or read book Geosynthetic Reinforced Soil GRS Walls written by Jonathan T. H. Wu and published by John Wiley & Sons. This book was released on 2019-07-10 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a detailed overview of Geosynthetic Reinforced Soil Walls Geosynthetic Reinforced Soil (GRS) Walls deploy horizontal layers of closely spaced tensile inclusion in the fill material to achieve stability of a soil mass. GRS walls are more adaptable to different environmental conditions, more economical, and offer high performance in a wide range of transportation infrastructure applications. This book addresses both GRS and GMSE, with a much stronger emphasis on the former. For completeness, it begins with a review of shear strength of soils and classical earth pressure theories. It then goes on to examine the use of geosynthetics as reinforcement, and followed by the load-deformation behavior of GRS mass as a soil-geosynthetic composite, reinforcing mechanisms of GRS, and GRS walls with different types of facing. Finally, the book finishes by covering design concepts with design examples for different loading and geometric conditions, and the construction of GRS walls, including typical construction procedures and general construction guidelines. The number of GRS walls and abutments built to date is relatively low due to lack of understanding of GRS. While failure rate of GMSE has been estimated to be around 5%, failure of GRS has been found to be practically nil, with studies suggesting many advantages, including a smaller susceptibility to long-term creep and stronger resistance to seismic loads when well-compacted granular fill is employed. Geosynthetic Reinforced Soil (GRS) Walls will serve as an excellent guide or reference for wall projects such as transportation infrastructure—including roadways, bridges, retaining walls, and earth slopes—that are in dire need of repair and replacement in the U.S. and abroad. Covers both GRS and GMSE (MSE with geosynthetics as reinforcement); with much greater emphasis on GRS walls Showcases reinforcing mechanisms, engineering behavior, and design concepts of GRS and includes many step-by-step design examples Features information on typical construction procedures and general construction guidelines Includes hundreds of line drawings and photos Geosynthetic Reinforced Soil (GRS) Walls is an important book for practicing geotechnical engineers and structural engineers, as well as for advanced students of civil, structural, and geotechnical engineering.
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Building Design and Construction Handbook written by Frederick S. Merritt and published by McGraw-Hill Companies. This book was released on 1982 with total page 1512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides updated, comprehensive, and practical information and guidelines on aspects of building design and construction, including materials, methods, structural types, components, and costs, and management techniques.
Download or read book Pavement Analysis and Design written by Yang Hsien Huang and published by . This book was released on 2004 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: For one/two-semester, undergraduate/graduate courses in Pavement Design. This up-to-date text covers both theoretical and practical aspects of pavement analysis and design. It includes some of the latest developments in the field, and some very useful computer software-developed by the author-with detailed instructions.
Download or read book Geotechnical Engineer s Portable Handbook written by Robert Day and published by McGraw Hill Professional. This book was released on 1999-12-02 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-volume library of instant geotechnical and foundation data Now for the first time ever, geotechnical, foundation, and civil engineers...geologists...architects, planners, and construction managers can quickly find information they must refer to every working day, in one compact source. Edited by Robert W. Day, the time -and effort-saving Geotechnical Engineer's Portable Handbook gives you field exploration guidelines and lab procedures. You'll find soil and rock classification, basic phase relationships, and all the tables and charts you need for stress distribution, pavement, and pipeline design. You also get abundant information on all types of geotechnical analyses, including settlement, bearing capacity, expansive soil, slope stability - plus coverage of retaining walls and building foundations. Other construction-related topics covered include grading, instrumentation, excavation, underpinning, groundwater control and more.
Download or read book Geosynthetics and Their Applications written by Sanjay Kumar Shukla and published by Thomas Telford. This book was released on 2002 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents topics that are based on field application areas for geosynthetics in civil engineering. This book also includes case histories and practical aspects of the application of geosynthetics, along with developments and references. It is useful for students and engineers in search of approaches to solutions for civil engineering problems.
Download or read book Soil Mechanics for Unsaturated Soils written by Delwyn G. Fredlund and published by John Wiley & Sons. This book was released on 1993-09-06 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principles and concepts for unsaturated soils are developed as extensions of saturated soils. Addresses problems where soils have a matric suction or where pore-water pressure is negative. Covers theory, measurement and use of the fundamental properties of unsaturated soils--permeability, shear strength and volume change. Includes a significant amount of case studies.
Download or read book Soil Liquefaction During Earthquakes written by I. M. Idriss and published by . This book was released on 2008 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Soil Reinforcement and Geosynthetics written by G. L. Sivakumar Babu and published by . This book was released on 2006-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concepts, applications and potential of soil reinforcement and geosynthetics to Civil Engineering students, academicians, and consultants. The material is lucidly presented with adequate number of solved examples. The theory is enriched by apt illustrations and a comprehensive coverage of all the areas of application.
Download or read book Fundamentals of Ground Improvement Engineering written by Jeffrey Evans and published by CRC Press. This book was released on 2021-09-17 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground improvement has been one of the most dynamic and rapidly evolving areas of geotechnical engineering and construction over the past 40 years. The need to develop sites with marginal soils has made ground improvement an increasingly important core component of geotechnical engineering curricula. Fundamentals of Ground Improvement Engineering addresses the most effective and latest cutting-edge techniques for ground improvement. Key ground improvement methods are introduced that provide readers with a thorough understanding of the theory, design principles, and construction approaches that underpin each method. Major topics are compaction, permeation grouting, vibratory methods, soil mixing, stabilization and solidification, cutoff walls, dewatering, consolidation, geosynthetics, jet grouting, ground freezing, compaction grouting, and earth retention. The book is ideal for undergraduate and graduate-level university students, as well as practitioners seeking fundamental background in these techniques. The numerous problems, with worked examples, photographs, schematics, charts and graphs make it an excellent reference and teaching tool.
Download or read book Foundation Analysis and Design written by Joseph E. Bowles and published by . This book was released on 1997 with total page 1175 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing.
Download or read book The Application of Geosynthetics in Waterfront Areas written by and published by PIANC. This book was released on 2011 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This report is intended to give public and port authorities, designers and contractors insight in the applications and the limitations of geosynthetics in waterfront structures. It is not a design book, but it should allow the users to quickly evaluate the possible use of a geotextile and to decide if a more detailed design is useful."--Introduction