Download or read book Designing State Machine Controllers Using Programmable Logic written by Michael Treseler and published by . This book was released on 1992 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how to design reliable state machine controllers. The book presents the techniques necessary to design, verify and test state machine controllers with the an emphasis on synthesis using programmable logic devices, and on the state diagram view of sequential logic design and analysis.
Download or read book Designing Logic Systems Using State Machines written by Christopher R. Clare and published by McGraw-Hill Companies. This book was released on 1973 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite State Machine Datapath Design Optimization and Implementation written by Justin Davis and published by Morgan & Claypool Publishers. This book was released on 2008 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite State Machine Datapath Design, Optimization, and Implementation explores the design space of combined FSM/Datapath implementations. The lecture starts by examining performance issues in digital systems such as clock skew and its effect on setup and hold time constraints, and the use of pipelining for increasing system clock frequency. This is followed by definitions for latency and throughput, with associated resource tradeoffs explored in detail through the use of dataflow graphs and scheduling tables applied to examples taken from digital signal processing applications. Also, design issues relating to functionality, interfacing, and performance for different types of memories commonly found in ASICs and FPGAs such as FIFOs, single-ports, and dual-ports are examined. Selected design examples are presented in implementation-neutral Verilog code and block diagrams, with associated design files available as downloads for both Altera Quartus and Xilinx Virtex FPGA platforms. A working knowledge of Verilog, logic synthesis, and basic digital design techniques is required. This lecture is suitable as a companion to the synthesis lecture titled Introduction to Logic Synthesis using Verilog HDL.
Download or read book Microprogrammed State Machine Design written by Michel A. Lynch and published by CRC Press. This book was released on 1993-01-12 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprogrammed State Machine Design is a digital computer architecture text that builds systematically from basic concepts to complex state-machine design. It provides practical techniques and alternatives for designing solutions to data processing problems both in commerce and in research purposes. It offers an excellent introduction to the tools and elements of design used in microprogrammed state machines, and incoporates the necessary background in number systems, hardware building blocks, assemblers for use in preparing control programs, and tools and components for assemblers . The author conducts an in-depth examination of first- and second-level microprogrammed state machines. He promotes a top-down approach that examines algorithms mathematically to exploit the simplifications resulting from choosing the proper representation and application of algebraic manipulation. The steps involved in the cycle of design and simulation steps are demonstrated through an example of running a computer through a simulation. Other topics covered in Microprogrammed State Machine Design include a discussion of simulation methods, the development and use of assembler language processors, and comparisons among various hardware implementations, such as the Reduced Instruction Set Computer (RISC) and the Digital Signal Processor (DSP). As a text and guide, Microprogrammed State Machine Design will interest students in the computer sciences, computer architectects and engineers, systems programmers and analysts, and electrical engineers.
Download or read book Logic Synthesis for FPGA Based Finite State Machines written by Alexander Barkalov and published by Springer. This book was released on 2015-10-15 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses control units represented by the model of a finite state machine (FSM). It contains various original methods and takes into account the peculiarities of field-programmable gate arrays (FPGA) chips and a FSM model. It shows that one of the peculiarities of FPGA chips is the existence of embedded memory blocks (EMB). The book is devoted to the solution of problems of logic synthesis and reduction of hardware amount in control units. The book will be interesting and useful for researchers and PhD students in the area of Electrical Engineering and Computer Science, as well as for designers of modern digital systems.
Download or read book A Hands On Guide to Designing Embedded Systems written by Adam Taylor and published by Artech House. This book was released on 2021-10-31 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical resource introduces readers to the design of field programmable gate array systems (FPGAs). Techniques and principles that can be applied by the engineer to understand challenges before starting a project are presented. The book provides a framework from which to work and approach development of embedded systems that will give readers a better understanding of the issues at hand and can develop solution which presents lower technical and programmatic risk and a faster time to market. Programmatic and system considerations are introduced, providing an overview of the engineering life cycle when developing an electronic solution from concept to completion. Hardware design architecture is discussed to help develop an architecture to meet the requirements placed upon it, and the trade-offs required to achieve the budget. The FPGA development lifecycle and the inputs and outputs from each stage, including design, test benches, synthesis, mapping, place and route and power estimation, are also presented. Finally, the importance of reliability, why it needs to be considered, the current standards that exist, and the impact of not considering this is explained. Written by experts in the field, this is the first book by “engineers in the trenches” that presents FPGA design on a practical level.
Download or read book Logic Synthesis for FSM Based Control Units written by Alexander Barkalov and published by Springer Science & Business Media. This book was released on 2009-11-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the hardware implementation of control algorithms represented by graph-schemes of algorithm. It includes new methods of logic synthesis and optimization for logic circuits of Mealy and Moore FSMs oriented on both ASIC and FPLD.
Download or read book Design of Reconfigurable Logic Controllers written by Andrei Karatkevich and published by Springer. This book was released on 2015-12-23 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the original concepts and modern techniques for specification, synthesis, optimisation and implementation of parallel logical control devices. It deals with essential problems of reconfigurable control systems like dependability, modularity and portability. Reconfigurable systems require a wider variety of design and verification options than the application-specific integrated circuits. The book presents a comprehensive selection of possible design techniques. The diversity of the modelling approaches covers Petri nets, state machines and activity diagrams. The preferences of the presented optimization and synthesis methods are not limited to increasing of the efficiency of resource use. One of the biggest advantages of the presented methods is the platform independence, the FPGA devices and single board computers are some of the examples of possible platforms. These issues and problems are illustrated with practical cases of complete control systems. If you expect a new look at the reconfigurable systems designing process or need ideas for improving the quality of the project, this book is a good choice.g process or need ideas for improving the quality of the project, this book is a good choice.
Download or read book Logic Synthesis for Finite State Machines Based on Linear Chains of States written by Alexander Barkalov and published by Springer. This book was released on 2017-06-24 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses Moore finite state machines (FSMs) implemented with field programmable gate arrays (FPGAs) including look-up table (LUT) elements and embedded memory blocks (EMBs). To minimize the number of LUTs in FSM logic circuits, the authors propose replacing a state register with a state counter. They also put forward an approach allowing linear chains of states to be created, which simplifies the system of input memory functions and, therefore, decreases the number of LUTs in the resulting FSM circuit. The authors combine this approach with using EMBs to implement the system of output functions (microoperations). This allows a significant decrease in the number of LUTs, as well as eliminating a lot of interconnections in the FSM logic circuit. As a rule, it also reduces the area occupied by the circuit and diminishes the resulting power dissipation. This book is an interesting and valuable resource for students and postgraduates in the area of computer science, as well as for designers of digital systems that included complex control units
Download or read book Digital Designing with Programmable Logic Devices written by John W. Carter and published by . This book was released on 1997 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this text is to use hands-on methodology to present programmable logic devices from a viewpoint which will prepare the student for application within the digital design industry. The knowledge of state machines and the ability to apply them to control situations are vital to the overall education of the digital designer. Concentrating on programmable logic devices, it prepares the reader to be a more valuable part of the design team. An inductive/application approach to the use of programmable logic devices in digital electronic design is application-oriented rather than theoretical. This results in the acquisition of learned, repeatable skills. The text contains numerous examples and completely worked problems with integrated text, describing each step of the design process.
Download or read book Logic Synthesis for VLSI Based Combined Finite State Machines written by Alexander Barkalov and published by Springer Nature. This book was released on 2022-11-24 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to design and optimization of control units represented by combined finite state machines (CFSMs). The CFSMs combine features of both Mealy and Moore FSMs. Having states of Moore FSM, they produce output signals of both Mealy and Moore types. To optimize the circuits of CFSMs, we propose to use optimization methods targeting both Mealy and Moore FSMs. The book contains some original synthesis and optimization methods targeting hardware reduction in VLSI-based CFSM circuits. These methods take into account the peculiarities of both a CFSM model and a VLSI chip in use. The optimization is achieved due to combining classical optimization methods with new methods proposed in this book. These new methods are a mixed encoding of collections of microoperations and a twofold state assignment in CFSMs. All proposed methods target reducing the numbers of arguments in systems of Boolean functions representing CFSM circuits. Also, we propose to use classes of pseudoequivalent states of Moore FSMs to reduce the number of product terms in these systems.The book includes a lot of examples which contributes to a better understanding of the features of the synthesis methods under consideration. This is the first book entirely devoted to the problems associated with synthesis and optimization of VLSI-based CFSMs. We hope that the book will be interesting and useful for students and PhD students in the area of Computer Science, as well as for designers of various digital systems. We think that proposed CFSM models enlarge the class of models applied for implementation of control units with modern VLSI chips.
Download or read book FSM based Digital Design using Verilog HDL written by Peter Minns and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: As digital circuit elements decrease in physical size, resulting in increasingly complex systems, a basic logic model that can be used in the control and design of a range of semiconductor devices is vital. Finite State Machines (FSM) have numerous advantages; they can be applied to many areas (including motor control, and signal and serial data identification to name a few) and they use less logic than their alternatives, leading to the development of faster digital hardware systems. This clear and logical book presents a range of novel techniques for the rapid and reliable design of digital systems using FSMs, detailing exactly how and where they can be implemented. With a practical approach, it covers synchronous and asynchronous FSMs in the design of both simple and complex systems, and Petri-Net design techniques for sequential/parallel control systems. Chapters on Hardware Description Language cover the widely-used and powerful Verilog HDL in sufficient detail to facilitate the description and verification of FSMs, and FSM based systems, at both the gate and behavioural levels. Throughout, the text incorporates many real-world examples that demonstrate designs such as data acquisition, a memory tester, and passive serial data monitoring and detection, among others. A useful accompanying CD offers working Verilog software tools for the capture and simulation of design solutions. With a linear programmed learning format, this book works as a concise guide for the practising digital designer. This book will also be of importance to senior students and postgraduates of electronic engineering, who require design skills for the embedded systems market.
Download or read book Digital Systems Design and Prototyping Using Field Programmable Logic written by Zoran Salcic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field-programmable logic has been available for a number of years. The role of Field-Programmable Logic Devices (FPLDs) has evolved from simply implementing the system `glue-logic' to the ability to implement very complex system functions, such as microprocessors and microcomputers. The speed with which these devices can be programmed makes them ideal for prototyping. Low production cost makes them competitive for small to medium volume productions. These devices make possible new sophisticated applications, and bring up new hardware/software trade-offs and diminish the traditional hardware/software demarcation line. Advanced design tools are being developed for automatic compilation of complex designs and routings to custom circuits. Digital Systems Design and Prototyping Using Field Programmable Logic covers the subjects of digital systems design and (FPLDs), combining them into an entity useful for designers in the areas of digital systems and rapid system prototyping. It is also useful for the growing community of engineers and researchers dealing with the exciting field of FPLDs, reconfigurable and programmable logic. The authors' goal is to bring these topics to students studying digital system design, computer design, and related subjects in order to show them how very complex circuits can be implemented at the desk. Digital Systems Design and Prototyping Using Field Programmable Logic makes a pioneering effort to present rapid prototyping and generation of computer systems using FPLDs. From the Foreword: `This is a ground-breaking book that bridges the gap between digital design theory and practice. It provides a unifying terminology for describing FPLD technology. In addition to introducing the technology it also describes the design methodology and tools required to harness this technology. It introduces two hardware description languages (e.g. AHDL and VHDL). Design is best learned by practice and the book supports this notion with abundant case studies.' Daniel P. Siewiorek, Carnegie Mellon University CD-ROM INCLUDED! Digital Systems Design and Prototyping Using Field Programmable Logic, First Edition includes a CD-ROM that contains Altera's MAX+PLUS II 7.21 Student Edition Programmable Logic Development Software. MAX+PLUS II is a fully integrated design environment that offers unmatched flexibility and performance. The intuitive graphical interface is complemented by complete and instantly accessible on-line documentation, which makes learning and using MAX+PLUS II quick and easy. The MAX+PLUS II version 7.21 Student Edition offers the following features: Operates on PCs running Windows 3.1, Windows 95 and Windows NT 3.51 and 4.0. Graphical and text-based design entry, including the Altera Hardware Description Language (AHDL) and VHDL. Design compilation for Product-term (MAX 7000S) and look-up table (FLEX 10K) device architectures. Design verification with full timing simulation.
Download or read book Finite State Machines in Hardware written by Volnei A. Pedroni and published by MIT Press. This book was released on 2013-12-20 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to the theory and design of hardware-implemented finite state machines, with design examples developed in both VHDL and SystemVerilog languages. Modern, complex digital systems invariably include hardware-implemented finite state machines. The correct design of such parts is crucial for attaining proper system performance. This book offers detailed, comprehensive coverage of the theory and design for any category of hardware-implemented finite state machines. It describes crucial design problems that lead to incorrect or far from optimal implementation and provides examples of finite state machines developed in both VHDL and SystemVerilog (the successor of Verilog) hardware description languages. Important features include: extensive review of design practices for sequential digital circuits; a new division of all state machines into three hardware-based categories, encompassing all possible situations, with numerous practical examples provided in all three categories; the presentation of complete designs, with detailed VHDL and SystemVerilog codes, comments, and simulation results, all tested in FPGA devices; and exercise examples, all of which can be synthesized, simulated, and physically implemented in FPGA boards. Additional material is available on the book's Website. Designing a state machine in hardware is more complex than designing it in software. Although interest in hardware for finite state machines has grown dramatically in recent years, there is no comprehensive treatment of the subject. This book offers the most detailed coverage of finite state machines available. It will be essential for industrial designers of digital systems and for students of electrical engineering and computer science.
Download or read book Design of Embedded Control Systems written by Marian Andrzej Adamski and published by Springer Science & Business Media. This book was released on 2005-06-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: A set of original results in the ?eld of high-level design of logical control devices and systems is presented in this book. These concern different aspects of such important and long-term design problems, including the following, which seem to be the main ones. First, the behavior of a device under design must be described properly, and some adequate formal language should be chosen for that. Second, effective algorithmsshouldbeusedforcheckingtheprepareddescriptionforcorrectness, foritssyntacticandsemanticveri?cationattheinitialbehaviorlevel.Third,the problem of logic circuit implementation must be solved using some concrete technological base; ef?cient methods of logic synthesis, test, and veri?cation should be developed for that. Fourth, the task of the communication between the control device and controlled objects (and maybe between different control devices)waitsforitssolution.Alltheseproblemsarehardenoughandcannotbe successfully solved without ef?cient methods and algorithms oriented toward computer implementation. Some of these are described in this book. The languages used for behavior description have been descended usually from two well-known abstract models which became classic: Petri nets and ?nite state machines (FSMs). Anyhow, more detailed versions are developed and described in the book, which enable to give more complete information concerningspeci?cqualitiesoftheregardedsystems.Forexample,themodelof parallelautomatonispresented,whichunliketheconventional?niteautomaton can be placed simultaneously into several places, calledpartial. As a base for circuit implementation of control algorithms, FPGA is accepted in majority of cases.
Download or read book Game Programming Patterns written by Robert Nystrom and published by Genever Benning. This book was released on 2014-11-03 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biggest challenge facing many game programmers is completing their game. Most game projects fizzle out, overwhelmed by the complexity of their own code. Game Programming Patterns tackles that exact problem. Based on years of experience in shipped AAA titles, this book collects proven patterns to untangle and optimize your game, organized as independent recipes so you can pick just the patterns you need. You will learn how to write a robust game loop, how to organize your entities using components, and take advantage of the CPUs cache to improve your performance. You'll dive deep into how scripting engines encode behavior, how quadtrees and other spatial partitions optimize your engine, and how other classic design patterns can be used in games.
Download or read book Logic Synthesis for FPGA Based Control Units written by Alexander Barkalov and published by Springer Nature. This book was released on 2020-01-08 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on control units, which are a vital part of modern digital systems, and responsible for the efficiency of controlled systems. The model of a finite state machine (FSM) is often used to represent the behavior of a control unit. As a rule, control units have irregular structures that make it impossible to design their logic circuits using the standard library cells. Design methods depend strongly on such factors as the FSM used, specific features of the logic elements implemented in the FSM logic circuit, and the characteristics of the control algorithm to be interpreted. This book discusses Moore and Mealy FSMs implemented with FPGA chips, including look-up table elements (LUT) and embedded memory blocks (EMB). It is crucial to minimize the number of LUTs and EMBs in an FSM logic circuit, as well as to make the interconnections between the logic elements more regular, and various methods of structural decompositions can be used to solve this problem. These methods are reduced to the presentation of an FSM circuit as a composition of different logic blocks, the majority of which implement systems of intermediate logic functions different (and much simpler) than input memory functions and FSM output functions. The structural decomposition results in multilevel FSM circuits having fewer logic elements than equivalent single-level circuits. The book describes well-known methods of structural decomposition and proposes new ones, examining their impact on the final amount of hardware in an FSM circuit. It is of interest to students and postgraduates in the area of Computer Science, as well as experts involved in designing digital systems with complex control units. The proposed models and design methods open new possibilities for creating logic circuits of control units with an optimal amount of hardware and regular interconnections.