Download or read book Designing Modern Embedded Systems Software Hardware and Applications written by Stefan Henkler and published by Springer Nature. This book was released on 2023-06-10 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th IFIP TC 10 International Embedded Systems Symposium, IESS 2022, held in Lippstadt, Germany, during November 3-4, 2022. The 10 full revised papers and 2 short papers presented were carefully reviewed and selected from 13 submissions. The presented research and technical works cover system-level design methods, algorithms, verification and validation techniques, estimation of system properties and characteristics, performance analysis, and real-time systems design. Also, the book presents industrial and real-world application case studies that discuss the challenges and realizations of modern embedded systems, especially when it comes to including artificial intelligence algorithms and techniques in embedded systems.
Download or read book Designing Modern Embedded Systems Software Hardware and Applications written by Stefan Henkler and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th IFIP TC 10 International Embedded Systems Symposium, IESS 2022, held in Lippstadt, Germany, during November 3-4, 2022. The 10 full revised papers and 2 short papers presented were carefully reviewed and selected from 13 submissions. The presented research and technical works cover system-level design methods, algorithms, verification and validation techniques, estimation of system properties and characteristics, performance analysis, and real-time systems design. Also, the book presents industrial and real-world application case studies that discuss the challenges and realizations of modern embedded systems, especially when it comes to including artificial intelligence algorithms and techniques in embedded systems.
Download or read book Embedded System Design written by Frank Vahid and published by John Wiley & Sons. This book was released on 2001-10-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.
Download or read book The Art of Designing Embedded Systems written by Jack Ganssle and published by Newnes. This book was released on 2008-07-03 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jack Ganssle has been forming the careers of embedded engineers for 20+ years. He has done this with four books, over 500 articles, a weekly column, and continuous lecturing. Technology moves fast and since the first edition of this best-selling classic much has changed. The new edition will reflect the author's new and ever evolving philosophy in the face of new technology and realities. Now more than ever an overarching philosophy of development is needed before just sitting down to build an application. Practicing embedded engineers will find that Jack provides a high-level strategic plan of attack to the often times chaotic and ad hoc design and development process. He helps frame and solve the issues an engineer confronts with real-time code and applications, hardware and software coexistences, and streamlines detail management. CONTENTS: Chapter 1 - IntroductionChapter 2 – The ProjectChapter 3 – The CodeChapter 4 – Real TimeChapter 5 – The Real WorldChapter 6 – Disciplined DevelopmentAppendix A – A Firmware StandardAppendix B - A Simple Drawing SystemAppendix C – A Boss’s Guide to Process Authored by Jack Ganssle, Tech Editor of Embedded Systems Programming and weekly column on embedded.com Keep schedules in check as projects and codes grow by taking time to understand the project beforehand Understand how cost/benefit coexists with design and development
Download or read book Modern Embedded Computing written by Peter Barry and published by Elsevier. This book was released on 2012-01-27 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern embedded systems are used for connected, media-rich, and highly integrated handheld devices such as mobile phones, digital cameras, and MP3 players. This book provides an understanding of the platform architecture of modern embedded computing systems that drive mobile devices.
Download or read book Embedded Systems A Hardware Software Co Design Approach written by Bashir I Morshed and published by Springer Nature. This book was released on 2021-04-19 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces the concept of embedded systems with exercises using Arduino Uno. It is intended for advanced undergraduate and graduate students in computer science, computer engineering, and electrical engineering programs. It contains a balanced discussion on both hardware and software related to embedded systems, with a focus on co-design aspects. Embedded systems have applications in Internet-of-Things (IoT), wearables, self-driving cars, smart devices, cyberphysical systems, drones, and robotics. The hardware chapter discusses various microcontrollers (including popular microcontroller hardware examples), sensors, amplifiers, filters, actuators, wired and wireless communication topologies, schematic and PCB designs, and much more. The software chapter describes OS-less programming, bitmath, polling, interrupt, timer, sleep modes, direct memory access, shared memory, mutex, and smart algorithms, with lots of C-code examples for Arduino Uno. Other topics discussed are prototyping, testing, verification, reliability, optimization, and regulations. Appropriate for courses on embedded systems, microcontrollers, and instrumentation, this textbook teaches budding embedded system programmers practical skills with fun projects to prepare them for industry products. Introduces embedded systems for wearables, Internet-of-Things (IoT), robotics, and other smart devices; Offers a balanced focus on both hardware and software co-design of embedded systems; Includes exercises, tutorials, and assignments.
Download or read book EMBEDDED SYSTEMS A CONTEMPORARY DESIGN TOOL written by James K. Peckol and published by . This book was released on 2009-01-01 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: Developers and Engineers Special Features: · Presents the embedded system development process based upon the need for delivering a safe and reliable design· Covers the essential aspects of the hardware and software necessary for design and development· Develops the application as a collection of interacting tasks under the management of a real-time operating system· Discusses the physical world that includes working with a wide variety of signals· Offers a number of laboratory projects of increasing complexity About The Book: This book provides readers with a developer's perspective to embedded systems concepts. It examines in detail each of the important theoretical and practical aspects that one must consider when designing today's applications. Readers then are taken from concept to realization as they learn how to apply critical concepts. Throughout the pages, the Verilog language is used as a modeling and synthesis tool to express the hardware implementation, UML and structured design to model the software designs, and the C language to affect the software implementation.
Download or read book Embedded System Design written by Lawrence J. Henschen and published by Elsevier. This book was released on 2023-09-14 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems and the Internet of Things are current major efforts in industry and will continue to be mainstream commercial activities for the foreseeable future. Embedded Systems Design presents methodologies for designing such systems and discusses major issues, both present and future, that designers must consider in bringing products with embedded processing to the market. It starts from the first step after product proposal (behavioral modelling) and carries through steps for modelling internal operations. The book discusses methods for and issues in designing safe, reliable, and robust embedded systems. It covers the selection of processors and related hardware as well as issues involved in designing the related software. Finally, the book present issues that will occur in systems designed for the Internet of Things.This book is for junior/senior/MS students in computer science, computer engineering, and electrical engineering who intend to take jobs in industry designing and implementing embedded systems and Internet of Things applications. Focuses on the design of embedded systems, starting from product conception through high-level modeling and up to the selection of hardware, software, and network platforms Discusses the trade-offs of the various techniques presented so that engineers will be able to make the best choices for designs for future products Contains a section with three chapters on making designs that are reliable, robust, and safe Includes a discussion of the two main models for the structure of the Internet of Things, as well as the issues engineers will need to take into consideration in designing future IoT applications Uses the design of a bridge control system as a continuing example across most of the chapters in order to illustrate the differences and trade-offs of the various techniques
Download or read book Embedded Systems and Software Validation written by Abhik Roychoudhury and published by Morgan Kaufmann. This book was released on 2009-04-29 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern embedded systems require high performance, low cost and low power consumption. Such systems typically consist of a heterogeneous collection of processors, specialized memory subsystems, and partially programmable or fixed-function components. This heterogeneity, coupled with issues such as hardware/software partitioning, mapping, scheduling, etc., leads to a large number of design possibilities, making performance debugging and validation of such systems a difficult problem. Embedded systems are used to control safety critical applications such as flight control, automotive electronics and healthcare monitoring. Clearly, developing reliable software/systems for such applications is of utmost importance. This book describes a host of debugging and verification methods which can help to achieve this goal. Covers the major abstraction levels of embedded systems design, starting from software analysis and micro-architectural modeling, to modeling of resource sharing and communication at the system level Integrates formal techniques of validation for hardware/software with debugging and validation of embedded system design flows Includes practical case studies to answer the questions: does a design meet its requirements, if not, then which parts of the system are responsible for the violation, and once they are identified, then how should the design be suitably modified?
Download or read book Embedded Systems Design written by Steve Heath and published by Elsevier. This book was released on 2002-10-30 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition the latest ARM processors and other hardware developments are fully covered along with new sections on Embedded Linux and the new freeware operating system eCOS. The hot topic of embedded systems and the internet is also introduced. In addition a fascinating new case study explores how embedded systems can be developed and experimented with using nothing more than a standard PC. * A practical introduction to the hottest topic in modern electronics design* Covers hardware, interfacing and programming in one book* New material on Embedded Linux for embedded internet systems
Download or read book Software Engineering for Embedded Systems written by Robert Oshana and published by Newnes. This book was released on 2013-04-01 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Expert Guide gives you the techniques and technologies in software engineering to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems when using software engineering methods to develop your embedded systems. With this book you will learn: The principles of good architecture for an embedded system Design practices to help make your embedded project successful Details on principles that are often a part of embedded systems, including digital signal processing, safety-critical principles, and development processes Techniques for setting up a performance engineering strategy for your embedded system software How to develop user interfaces for embedded systems Strategies for testing and deploying your embedded system, and ensuring quality development processes Practical techniques for optimizing embedded software for performance, memory, and power Advanced guidelines for developing multicore software for embedded systems How to develop embedded software for networking, storage, and automotive segments How to manage the embedded development process Includes contributions from: Frank Schirrmeister, Shelly Gretlein, Bruce Douglass, Erich Styger, Gary Stringham, Jean Labrosse, Jim Trudeau, Mike Brogioli, Mark Pitchford, Catalin Dan Udma, Markus Levy, Pete Wilson, Whit Waldo, Inga Harris, Xinxin Yang, Srinivasa Addepalli, Andrew McKay, Mark Kraeling and Robert Oshana. Road map of key problems/issues and references to their solution in the text Review of core methods in the context of how to apply them Examples demonstrating timeless implementation details Short and to- the- point case studies show how key ideas can be implemented, the rationale for choices made, and design guidelines and trade-offs
Download or read book Embedded Systems Design with Platform FPGAs written by Ronald Sass and published by Morgan Kaufmann. This book was released on 2010-09-10 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems Design with Platform FPGAs introduces professional engineers and students alike to system development using Platform FPGAs. The focus is on embedded systems but it also serves as a general guide to building custom computing systems. The text describes the fundamental technology in terms of hardware, software, and a set of principles to guide the development of Platform FPGA systems. The goal is to show how to systematically and creatively apply these principles to the construction of application-specific embedded system architectures. There is a strong focus on using free and open source software to increase productivity. Each chapter is organized into two parts. The white pages describe concepts, principles, and general knowledge. The gray pages provide a technical rendition of the main issues of the chapter and show the concepts applied in practice. This includes step-by-step details for a specific development board and tool chain so that the reader can carry out the same steps on their own. Rather than try to demonstrate the concepts on a broad set of tools and boards, the text uses a single set of tools (Xilinx Platform Studio, Linux, and GNU) throughout and uses a single developer board (Xilinx ML-510) for the examples. Explains how to use the Platform FPGA to meet complex design requirements and improve product performance Presents both fundamental concepts together with pragmatic, step-by-step instructions for building a system on a Platform FPGA Includes detailed case studies, extended real-world examples, and lab exercises
Download or read book Embedded Systems Hardware for Software Engineers written by Ed Lipiansky and published by McGraw Hill Professional. This book was released on 2011-09-22 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: A PRACTICAL GUIDE TO HARDWARE FUNDAMENTALS Embedded Systems Hardware for Software Engineers describes the electrical and electronic circuits that are used in embedded systems, their functions, and how they can be interfaced to other devices. Basic computer architecture topics, memory, address decoding techniques, ROM, RAM, DRAM, DDR, cache memory, and memory hierarchy are discussed. The book covers key architectural features of widely used microcontrollers and microprocessors, including Microchip's PIC32, ATMEL's AVR32, and Freescale's MC68000. Interfacing to an embedded system is then described. Data acquisition system level design considerations and a design example are presented with real-world parameters and characteristics. Serial interfaces such as RS-232, RS-485, PC, and USB are addressed and printed circuit boards and high-speed signal propagation over transmission lines are covered with a minimum of math. A brief survey of logic families of integrated circuits and programmable logic devices is also contained in this in-depth resource. COVERAGE INCLUDES: Architecture examples Memory Memory address decoding Read-only memory and other related devices Input and output ports Analog-to-digital and digital-to-analog converters Interfacing to external devices Transmission lines Logic families of integrated circuits and their signaling characteristics The printed circuit board Programmable logic devices Test equipment: oscilloscopes and logic analyzers
Download or read book Embedded Software Design written by Jacob Beningo and published by Apress. This book was released on 2022-11-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design higher-quality embedded software from concept through production. This book assumes basic C and microcontroller programming knowledge and is organized into three critical areas: Software Architecture and Design; Agile, DevOps, and Processes; and Development and Coding Skills. You'll start with a basic introduction to embedded software architecture and the considerations for a successful design. The book then breaks down how to architect an RTOS-based application and explore common design patterns and building blocks. Next, you'll review embedded software design processes such as TDD, CI/CD, modeling, and simulation that can be used to accelerate development. Finally, the book will examine how to select a microcontroller, write configurable code, coding strategies, techniques, and tools developers can’t live without. Embedded systems are typically designed using microcontrollers to build electronic systems with a dedicated function and real-time responses. Modern systems need to carefully balance a complex set of features, manage security, and even run machine learning inferences while maintaining reasonable costs, scalability, and robustness. By the end of this book, you will have a defined development process, understand modern software architecture, and be equipped to start building embedded systems. What You'll Learn Understand what sound embedded system design is and how to employ it Explore modern development processes for quality systems Know where the bits hit the silicon: how to select a microcontroller Master techniques to write configurable, automated code Who This Book Is For Embedded software and hardware engineers, enthusiasts, or any stakeholders who would like to learn modern techniques for designing and building embedded systems.
Download or read book Embedded Systems World Class Designs written by Jack Ganssle and published by Newnes. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Famed author Jack Ganssle has selected the very best embedded systems design material from the Newnes portfolio. The result is a book covering the gamut of embedded design, from hardware to software to integrated embedded systems, with a strong pragmatic emphasis.
Download or read book Embedded Hardware Know It All written by Jack Ganssle and published by Newnes. This book was released on 2007-09-14 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Newnes Know It All Series takes the best of what our authors have written to create hard-working desk references that will be an engineer's first port of call for key information, design techniques and rules of thumb. Guaranteed not to gather dust on a shelf! Circuit design using microcontrollers is both a science and an art. This book covers it all. It details all of the essential theory and facts to help an engineer design a robust embedded system. Processors, memory, and the hot topic of interconnects (I/O) are completely covered. Our authors bring a wealth of experience and ideas; this is a must-own book for any embedded designer. *A 360 degree view from best-selling authors including Jack Ganssle, Tammy Noergard, and Fred Eady *Key facts, techniques, and applications fully detailed *The ultimate hard-working desk reference: all the essential information, techniques, and tricks of the trade in one volume
Download or read book Embedded Systems written by A. K. Ganguly and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems discusses the architecture, its basic hardware and software elements, programming models and software engineering practices that are used for system development process. The embedded system resources are microprocessor, memory, ports, devices and power supply unit. The innovative technologies and tools for designing an embedded system are incorporated in this book along with the parallel and serial port devices, timing devices, devices for synchronous, isosynchronous and asynchronous communications in embedded system. It also covers the most important aspects of real time programming through the use of signals, mutex, message queues, mailboxes, pipes and virtual sockets and explains the Concepts of Real Time Operating Systems (RTOS).
