Download or read book Designing and Building Fuel Cells written by Colleen Spiegel and published by McGraw Hill Professional. This book was released on 2007-05-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acquire an All-in-One Toolkit for Expertly Designing, Modeling, and Constructing High-Performance Fuel Cells Designing and Building Fuel Cells equips you with a hands-on guide for the design, modeling, and construction of fuel cells that perform as well or better than some of the best fuel cells on the market today. Filled with over 120 illustrations and schematics of fuel cells and components, this “one-stop” guide covers fuel cell applications...fuels and the hydrogen economy...fuel cell chemistry, thermodynamics, and electrochemistry...fuel cell modeling, materials, and system design...fuel types, delivery, and processing...fuel cell operating conditions...fuel cell characterization...and much more. Authoritative and practical, Designing and Building Fuel Cells features: Complete information on stack design The latest fuel cell modeling techniques Guidance on cutting-edge materials and components Expert accounts of fuel cell types, processing, and optimization A step-by-step example for constructing a fuel cell Inside This State-of-the-Art Fuel Cell Sourcebook Introduction • Fuel Cell Applications • Fuel Cells and the Hydrogen Economy • Basic Fuel Cell Chemistry and Thermodynamics • Fuel Cell Electrochemistry • Fuel Cell Charge Transport • Fuel Cell Mass Transport • Fuel Cell Heat Transport • Fuel Cell Modeling • Fuel Cell Materials • Fuel Cell Stack Components and Materials • Fuel Cell Stack Design • Fuel Cell System Design • Fuel Types, Delivery, and Processing • Fuel Cell Operating Conditions • Fuel Cell Characterization
Download or read book PEM Fuel Cell Modeling and Simulation Using Matlab written by Colleen Spiegel and published by Elsevier. This book was released on 2011-08-29 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although, the basic concept of a fuel cell is quite simple, creating new designs and optimizing their performance takes serious work and a mastery of several technical areas. PEM Fuel Cell Modeling and Simulation Using Matlab, provides design engineers and researchers with a valuable tool for understanding and overcoming barriers to designing and building the next generation of PEM Fuel Cells. With this book, engineers can test components and verify designs in the development phase, saving both time and money. Easy to read and understand, this book provides design and modelling tips for fuel cell components such as: modelling proton exchange structure, catalyst layers, gas diffusion, fuel distribution structures, fuel cell stacks and fuel cell plant. This book includes design advice and MATLAB and FEMLAB codes for Fuel Cell types such as: polymer electrolyte, direct methanol and solid oxide fuel cells. This book also includes types for one, two and three dimensional modeling and two-phase flow phenomena and microfluidics. *Modeling and design validation techniques *Covers most types of Fuel Cell including SOFC *MATLAB and FEMLAB modelling codes *Translates basic phenomena into mathematical equations
Download or read book High Temperature Solid Oxide Fuel Cells for the 21st Century written by Kevin Kendall and published by Elsevier. This book was released on 2015-11-21 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature Solid Oxide Fuel Cells, Second Edition, explores the growing interest in fuel cells as a sustainable source of energy. The text brings the topic of green energy front and center, illustrating the need for new books that provide comprehensive and practical information on specific types of fuel cells and their applications. This landmark volume on solid oxide fuel cells contains contributions from experts of international repute, and provides a single source of the latest knowledge on this topic. - A single source for all the latest information on solid oxide fuel cells and their applications - Illustrates the need for new, more comprehensive books and study on the topic - Explores the growing interest in fuel cells as viable, sustainable sources of energy
Download or read book Fuel Cells Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations
Download or read book Designing and Building Fuel Cells written by Colleen Spiegel and published by McGraw Hill Professional. This book was released on 2007-06-15 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher description
Download or read book Modeling and Control of Fuel Cells written by M. H. Nehrir and published by John Wiley & Sons. This book was released on 2009-03-11 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only book available on fuel cell modeling and control with distributed power generation applications The emerging fuel cell (FC) technology is growing rapidly in its applications from small-scale portable electronics to large-scale power generation. This book gives students, engineers, and scientists a solid understanding of the FC dynamic modeling and controller design to adapt FCs to particular applications in distributed power generation. The book begins with a fascinating introduction to the subject, including a brief history of the U.S. electric utility formation and restructuring. Next, it provides coverage of power deregulation and distributed generation (DG), DG types, fuel cell DGs, and the hydrogen economy. Building on that foundation, it covers: Principle operations of fuel cells Dynamic modeling and simulation of PEM and solid-oxide fuel cells Principle operations and modeling of electrolyzers Power electronic interfacing circuits for fuel cell applications Control of grid-connected and stand-alone fuel cell power generation systems Hybrid fuel cell–based energy system case studies Present challenges and the future of fuel cells MATLAB/SIMULINK-based models and their applications are available via a companion Web site. Modeling and Control of Fuel Cells is an excellent reference book for students and professionals in electrical, chemical, and mechanical engineering and scientists working in the FC area.
Download or read book Gas Transport in Solid Oxide Fuel Cells written by Weidong He and published by Springer. This book was released on 2014-09-03 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary research and emerging measurement technologies associated with gas transport in solid oxide fuel cells. Within these pages, an introduction to the concept of gas diffusion in solid oxide fuel cells is presented. This book also discusses the history and underlying fundamental mechanisms of gas diffusion in solid oxide fuel cells, general theoretical mathematical models for gas diffusion, and traditional and advanced techniques for gas diffusivity measurement.
Download or read book Fuel Cell Technology Handbook written by Gregor Hoogers and published by CRC Press. This book was released on 2002-09-27 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cell systems have now reached a degree of technological maturity and appear destined to form the cornerstone of future energy technologies. But the rapid advances in fuel cell system development have left current information available only in scattered journals and Internet sites. The even faster race toward fuel cell commercialization further
Download or read book Hydrogen and Fuel Cell written by Johannes Töpler and published by Springer. This book was released on 2015-12-20 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to hydrogen as an essential energy carrier for use with renewable sources of primary energy. It provides an overview of the state of the art, while also highlighting the developmental and market potential of hydrogen in the context of energy technologies; mobile, stationary and portable applications; uninterruptible power supplies and in the chemical industry. Written by experienced practitioners, the book addresses the needs of engineers, chemists and business managers, as well as graduate students and researchers.
Download or read book Fuel Cell Engineering written by and published by Academic Press. This book was released on 2012-08-14 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are attractive electrochemical energy converters featuring potentially very high thermodynamic efficiency factors. The focus of this volume of Advances in Chemical Engineering is on quantitative approaches, particularly based on chemical engineering principles, to analyze, control and optimize the steady state and dynamic behavior of low and high temperature fuel cells (PEMFC, DMFC, SOFC) to be applied in mobile and stationary systems. - Updates and informs the reader on the latest research findings using original reviews - Written by leading industry experts and scholars - Reviews and analyzes developments in the field
Download or read book Nanotechnology in Fuel Cells written by Huaihe Song and published by Elsevier. This book was released on 2022-02-23 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Fuel Cells focuses on the use of nanotechnology in macroscopic and nanosized fuel cells to enhance their performance and lifespan. The book covers the fundamental design concepts and promising applications of nanotechnology-enhanced fuel cells and their advantages over traditional fuel cells in portable devices, including longer shelf life and lower cost. In the case of proton-exchange membrane fuel cells (PEMFCs), nano-membranes could provide 100 times higher conductivity of hydrogen ions in low humidity conditions than traditional membranes. For hydrogen fuel cell, nanocatalysts (Pt hybrid nanoparticles) could provide 12 times higher catalytic activity. This is an important reference source for materials scientists and engineers who are looking to understand how nanotechnology is being used to create more efficient macro- and nanosized fuel cells. - Outlines how fuel cells can be nanoengineered to enhance their performance and lifespan - Covers a variety of fuel cell types, including proton-exchange membrane fuel cells and hydrogen-based fuel cells - Assesses the major challenges of nanoengineering fuel cells at an industrial scale
Download or read book Power Electronics in Renewable Energy Systems and Smart Grid written by Bimal K. Bose and published by John Wiley & Sons. This book was released on 2019-08-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive and authoritative guide to power electronics in renewable energy systems Power electronics plays a significant role in modern industrial automation and high- efficiency energy systems. With contributions from an international group of noted experts, Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications offers a comprehensive review of the technology and applications of power electronics in renewable energy systems and smart grids. The authors cover information on a variety of energy systems including wind, solar, ocean, and geothermal energy systems as well as fuel cell systems and bulk energy storage systems. They also examine smart grid elements, modeling, simulation, control, and AI applications. The book's twelve chapters offer an application-oriented and tutorial viewpoint and also contain technology status review. In addition, the book contains illustrative examples of applications and discussions of future perspectives. This important resource: Includes descriptions of power semiconductor devices, two level and multilevel converters, HVDC systems, FACTS, and more Offers discussions on various energy systems such as wind, solar, ocean, and geothermal energy systems, and also fuel cell systems and bulk energy storage systems Explores smart grid elements, modeling, simulation, control, and AI applications Contains state-of-the-art technologies and future perspectives Provides the expertise of international authorities in the field Written for graduate students, professors in power electronics, and industry engineers, Power Electronics in Renewable Energy Systems and Smart Grid: Technology and Applications offers an up-to-date guide to technology and applications of a wide-range of power electronics in energy systems and smart grids.
Download or read book High temperature Solid Oxide Fuel Cells Fundamentals Design and Applications written by S.C. Singhal and published by Elsevier. This book was released on 2003-12-08 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications provides a comprehensive discussion of solid oxide fuel cells (SOFCs). SOFCs are the most efficient devices for the electrochemical conversion of chemical energy of hydrocarbon fuels into electricity, and have been gaining increasing attention for clean and efficient distributed power generation. The book explains the operating principle, cell component materials, cell and stack designs and fabrication processes, cell and stack performance, and applications of SOFCs. Individual chapters are written by internationally renowned authors in their respective fields, and the text is supplemented by a large number of references for further information. The book is primarily intended for use by researchers, engineers, and other technical people working in the field of SOFCs. Even though the technology is advancing at a very rapid pace, the information contained in most of the chapters is fundamental enough for the book to be useful even as a text for SOFC technology at the graduate level.
Download or read book Organic Inorganic Composite Polymer Electrolyte Membranes written by Dr Inamuddin and published by Springer. This book was released on 2017-05-10 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores the latest developments in the area of polymer electrolyte membranes (PEMs) used for high-temperature fuel cells. Featuring contributions from an international array of researchers, it presents a unified viewpoint on the operating principles of fuel cells, various methodologies used for the fabrication of PEMs, and issues related to the chemical and mechanical stabilities of the membranes. Special attention is given to the fabrication of electrospun nanocomposite membranes. The editors have consciously placed an emphasis on developments in the area of fast-growing and promising PEM materials obtained via hygroscopic inorganic fillers, solid proton conductors, heterocyclic solvents, ionic liquids, anhydrous H3PO4 blends, and heteropolyacids. This book is intended for fuel cell researchers and students who are interested in a deeper understanding of the organic–inorganic membranes used in fuel cells, membrane fabrication methodologies, properties and clean energy applications.
Download or read book Fuel Cells written by Detlef Stolten and published by John Wiley & Sons. This book was released on 2016-05-31 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ready reference is unique in collating in one scientifically precise and comprehensive handbook the widespread data on what is feasible and realistic in modern fuel cell technology. Edited by one of the leading scientists in this exciting area, the short, uniformly written chapters provide economic data for cost considerations and a full overview of demonstration data, covering such topics as fuel cells for transportation, fuel provision, codes and standards. The result is highly reliable facts and figures for engineers, researchers and decision makers working in the field of fuel cells.
Download or read book Fuel Cells for Automotive Applications written by Rob H. Thring and published by American Society of Mechanical Engineers. This book was released on 2004 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fuel Cells for Automotive Applications is a valuable addition to the literature available in this important field, where much current information is scattered through web sites, journal papers, and magazine articles. Chapters by experts in the field draws on both academic and industry-related research." "Fuel Cells for Automotive Applications will be welcomed by designers and manufacturers of fuel cell components, the designers of fuel cell systems, vehicle manufacturers, and anyone with an interest in the viability of this developing technology."--BOOK JACKET.
Download or read book The Hydrogen Economy written by National Academy of Engineering and published by National Academies Press. This book was released on 2004-09-05 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The announcement of a hydrogen fuel initiative in the President's 2003 State of the Union speech substantially increased interest in the potential for hydrogen to play a major role in the nation's long-term energy future. Prior to that event, DOE asked the National Research Council to examine key technical issues about the hydrogen economy to assist in the development of its hydrogen R&D program. Included in the assessment were the current state of technology; future cost estimates; CO2 emissions; distribution, storage, and end use considerations; and the DOE RD&D program. The report provides an assessment of hydrogen as a fuel in the nation's future energy economy and describes a number of important challenges that must be overcome if it is to make a major energy contribution. Topics covered include the hydrogen end-use technologies, transportation, hydrogen production technologies, and transition issues for hydrogen in vehicles.
