Download or read book Diffractive Optics written by Donald C. O'Shea and published by SPIE Press. This book was released on 2004 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the broad range of materials that were discussed in a series of short courses presented at Georgia Tech on the design, fabrication, and testing of diffractive optical elements (DOEs). Although there are not long derivations or detailed methods for specific engineering calculations, the reader should be familiar and comfortable with basic computational techniques. This text is not a 'cookbook' for producing DOEs, but it should provide readers with sufficient information to assess whether this technology would benefit their work, and to understand the requirements for using the concepts and techniques presented by the authors.
Download or read book Axiomatic Design and Fabrication of Composite Structures written by Dai Gil Lee and published by Oxford University Press. This book was released on 2006 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea that materials can be designed to satisfy specific performance requirements is relatively new. With high-performance composites, however, the entire process of designing and fabricating a part can be worked out before manufacturing. The purpose of this book is to present an integrated approach to the design and manufacturing of products from advanced composites. It shows how the basic behavior of composites and their constitutive relationships can be used during the design stage, which minimizes the complexity of manufacturing composite parts and reduces the repetitive "design-build-test" cycle. Designing it right the first time is going to determine the competitiveness of a company, the reliability of the part, the robustness of fabrication processes, and ultimately, the cost and development time of composite parts. Most of all, it should expand the use of advanced composite parts in fields that use composites only to a limited extent at this time. To achieve these goals, this book presents the design and fabrication of novel composite parts made for machine tools and other applications like robots and automobiles.This book is suitable as a textbook for graduate courses in the design and fabrication of composites. It will also be of interest to practicing engineers learning about composites and axiomatic design.A CD-ROM is included in every copy of the book, containing Axiomatic CLPT software. This program, developed by the authors, will assist readers in calculating material properties from the microstructure of the composite.This book is part of the Oxford Series on Advanced Manufacturing.
Download or read book Optical Specification Fabrication and Testing written by Jim Schwiegerling and published by . This book was released on 2014 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book connects the dots between geometrical optics, interference and diffraction, and aberrations to illustrate the development of an optical system. It focuses on initial layout, design and aberration analysis, fabrication, and, finally, testing and verification of the individual components and the system performance. It also covers more specialized topics such as fitting Zernike polynomials, representing aspheric surfaces with the Forbes Q polynomials, and testing with the Shack-Hartmann wavefront sensor. These topics are discussed in more detail than is found in other textbooks, and the techniques are developed to the point where readers can pursue their own analyses or modify to their particular situations.
Download or read book Integrated Circuit Test Engineering written by Ian A. Grout and published by Springer Science & Business Media. This book was released on 2005-08-22 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the book and the software provided with it, the reader can build his/her own tester arrangement to investigate key aspects of analog-, digital- and mixed system circuits Plan of attack based on traditional testing, circuit design and circuit manufacture allows the reader to appreciate a testing regime from the point of view of all the participating interests Worked examples based on theoretical bookwork, practical experimentation and simulation exercises teach the reader how to test circuits thoroughly and effectively
Download or read book Design for Excellence in Electronics Manufacturing written by Cheryl Tulkoff and published by John Wiley & Sons. This book was released on 2021-03-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to optimizing design for manufacturability and reliability from a team of experts Design for Excellence in Electronics Manufacturing is a comprehensive, state-of-the-art book that covers design and reliability of electronics. The authors—noted experts on the topic—explain how using the DfX concepts of design for reliability, design for manufacturability, design for environment, design for testability, and more, reduce research and development costs and decrease time to market and allow companies to confidently issue warranty coverage. By employing the concepts outlined in Design for Excellence in Electronics Manufacturing, engineers and managers can increase customer satisfaction, market share, and long-term profits. In addition, the authors describe the best practices regarding product design and show how the practices can be adapted for different manufacturing processes, suppliers, use environments, and reliability expectations. This important book: Contains a comprehensive review of the design and reliability of electronics Covers a range of topics: establishing a reliability program, design for the use environment, design for manufacturability, and more Includes technical information on electronic packaging, discrete components, and assembly processes Shows how aspects of electronics can fail under different environmental stresses Written for reliability engineers, electronics engineers, design engineers, component engineers, and others, Design for Excellence in Electronics Manufacturing is a comprehensive book that reveals how to get product design right the first time.
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book Proceedings of the U S U S S R Seminar on Problems of Design Development Fabrication and Test of Breeder Reactor Components U S papers in English written by and published by . This book was released on 1978 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Circuit Design Fabrication and Test written by Peter Shepherd and published by McGraw-Hill Professional Publishing. This book was released on 1996 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: All aspects of chip realization for both digital and analog circuits are covered. Electronics engineers are shown how to choose appropriate technololgy and circuit architecture, and plan the IC design. They'll gain expert information on power consaiderations, the advantages and disadvantages of each IC architecture, and aspects of design for testability.
Download or read book Digital Fabrication with Cement Based Materials written by Nicolas Roussel and published by Springer Nature. This book was released on 2022-01-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.
Download or read book Digital Design and Fabrication written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Descriptive Summaries for Program Elements of the Research Development Test and Evaluation Army Program FY 1987 U February 1986 written by and published by . This book was released on 1986 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Fabrication of Diffractive Optical Elements with MATLAB written by Shanti Bhattacharya and published by SPIE-International Society for Optical Engineering. This book was released on 2017 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Given the many different applications and uses of diffractive optics, the importance of this field cannot be underestimated. This book supplements the available literature on diffractive optic elements (DOEs) by equipping readers with the skills to begin designing, simulating, and fabricating diffractive optics. The design of DOEs is presented with simple equations and step-by-step procedures for simulation--from the simplest 1D grating to the more complex multifunctional DOEs--and analyzing their diffraction patterns using MATLAB. The fundamentals of fabrication techniques such as photolithography, electron beam lithography, and focused ion beam lithography with basic instructions for the beginner are presented. Basic error analysis and error-correction techniques for a few cases are also discussed. The contents of all the chapters are supported throughout by practical exercises and clearly commented MATLAB® codes (the codes are also on an accompanying CD), making this book useful even to a novice programmer"--
Download or read book Printed Circuit Boards written by R. S. Khandpur and published by McGraw Hill Professional. This book was released on 2005-09-07 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The printed circuit is the basic building block of the electronics hardware industry. This is a comprehensive single volume self-teaching guide to the art of printed circuit board design and fabrication -- covering the complete cycle of PCB creation, design, layout, fabrication, assembly, and testing.
Download or read book Design Fabrication and Characterization of Multifunctional Nanomaterials written by Sabu Thomas and published by Elsevier. This book was released on 2021-11-24 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Fabrication, and Characterization of Multifunctional Nanomaterials covers major techniques for the design, synthesis, and development of multifunctional nanomaterials. The chapters highlight the main characterization techniques, including X-ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, and scanning probe microscopy.The book explores major synthesis methods and functional studies, including: - Brillouin spectroscopy; - Temperature-dependent Raman spectroscopic studies; - Magnetic, ferroelectric, and magneto-electric coupling analysis; - Organ-on-a-chip methods for testing nanomaterials; - Magnetron sputtering techniques; - Pulsed laser deposition techniques; - Positron annihilation spectroscopy to prove defects in nanomaterials; - Electroanalytic techniques. This is an important reference source for materials science students, scientists, and engineers who are looking to increase their understanding of design and fabrication techniques for a range of multifunctional nanomaterials. - Explains the major design and fabrication techniques and processes for a range of multifunctional nanomaterials; - Demonstrates the design and development of magnetic, ferroelectric, multiferroic, and carbon nanomaterials for electronic applications, energy generation, and storage; - Green synthesis techniques and the development of nanofibers and thin films are also emphasized.
Download or read book Design Test and Microfabrication of MEMS and MOEMS written by and published by . This book was released on 1999 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Energy Objectives Calendar Year 1980 written by United States. Department of Energy and published by . This book was released on 1980 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1983 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:
