Download or read book Design of the Envelope Tracking Hybrid Supply Modulator for Lte 10mhz Application written by 陳彥廷 and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of the Envelope Tracking Hybrid Supply Modulator for Power Amplifier in LTE 20MHz Wireless Communication Applications written by 鄧厚威 and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hybrid Envelope Tracking Supply Modulator Analysis and Design for Wideband Applications written by Parisa Mahmoudidaryan and published by . This book was released on 2019 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wideband hybrid envelope tracking modulator utilizing a hysteretic-controlled three-level switching converter and a slew-rate enhanced linear amplifierer is presented. In addition to smaller ripple and lower losses of three-level switching converters, employing the proposed hysteresis control loop results in a higher speed loop and wider bandwidth converter, enabling over 80MHz of switching frequency. A concurrent sensor circuit monitors and regulates the flying capacitor voltage VCF and eliminates conventional required calibration loop to control it. The hysteretic-controlled three-level switching converter provides a high percentage of power amplifier supply load current with lower ripple, reducing the linear amplifier high-frequency current and ripple cancellation current, improving the overall system efficiency. A slew-rate enhancement (SRE) circuit is employed in the linear amplifier resulting in slew-rate of

Download or read book High Slew rate Adaptive Biasing Hybrid Envelope Tracking Supply Modulator for LTE Applications written by Yue Jing and published by . This book was released on 2017 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wireless communication enters smartphone era, more complicated communication technologies are being used to transmit higher data rate. Power amplifier (PA) has to work in back-off region, while this inevitably reduces battery life for cellphones. Various techniques have been reported to increase PA efficiency, such as envelope elimination and restoration (EER) and envelope tracking (ET). However, state of the art ET supply modulators failed to address high efficiency, high slew rate, and accurate tracking concurrently. In this dissertation, a linear-switch mode hybrid ET supply modulator utilizing adaptive biasing and gain enhanced current mirror operational transconductance amplifier (OTA) with class-AB output stage in parallel with a switching regulator is presented. In comparison to a conventional OTA design with similar quiescent current consumption, proposed approach improves positive and negative slew rate from 50 V/μs to 93.4 V/μs and -87 V/μs to -152.5 V/μs respectively, dc gain from 45 dB to 67 dB while consuming same amount of quiescent current. The proposed hybrid supply modulator achieves 83% peak efficiency, power added efficiency (PAE) of 42.3% at 26.2 dBm for a 10 MHz 7.24 dB peak-to-average power ratio (PAPR) LTE signal and improves PAE by 8% at 6 dB back off from 26.2 dBm power amplifier (PA) output power with respect to fixed supply. With a 10 MHz 7.24 dB PAPR QPSK LTE signal the ET PA system achieves adjacent channel leakage ratio (ACLR) of -37.7 dBc and error vector magnitude (EVM) of 4.5% at 26.2 dBm PA output power, while with a 10 MHz 8.15 dB PAPR 64QAM LTE signal the ET PA system achieves ACLR of -35.6 dBc and EVM of 6% at 26 dBm PA output power without digital pre-distortion (DPD). The proposed supply modulator core circuit occupies 1.1 mm2 die area, and is fabricated in a 0.18 μm CMOS technology.

Download or read book High Bandwidth Supply Modulator Design for Envelope Tracking Application Using 0 15um GaN on SiC written by Samyak Parakh and published by . This book was released on 2018 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Envelope Tracking Supply Modulator with Trellis Search Based Switching and 160 MHz Capability written by Weiyu Leng and published by . This book was released on 2020 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Envelope tracking is widely used to raise the efficiency of PAs. An envelope tracking supply modulator (ETSM) modulates PA's supply voltage to tracks the RF waveform's envelope, so that the PA will operate in saturation all the time. A hybrid amplifier is commonly used to realize the ETSM, which, in effect, partitions the envelope bandwidth into a low and high subband. An efficient switching buck converter tracks the low band. In parallel with it, an op-amp supplies the current in the high band. In prior arts, the hybrid amplifier is realized with feedback using a hysteresis comparator, whose output actuates the buck converter to respond to the changing envelope; the continuous-time op-amp makes up for the error. But a comparator-driven buck converter produces a slew-rate limited current that always lags the envelope waveform. This forces the op-amp to produce a larger current to correct the error, and the arrangement cannot guarantee that the buck converter switches no often than is absolutely necessary. We replace the hysteresis comparator with a novel trellis-search that, first, finds the optimal sequence to switch the buck converter to minimize the RMS current that the op-amp must deliver; second, to lower the loss from switching the capacitance of FETs, it penalizes a large number of switching events in the buck converter. Meanwhile, with a conventional on-chip hysteresis comparator, we can demonstrate ETSM operation up to 160 MHz modulation bandwidth. This is the widest bandwidth reported so far for any ETSM.

Download or read book Envelope Tracking Hybrid Supply Modulator for 5G Wireless Systems written by and published by . This book was released on 2021 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Supply Modulators for LTE Power Amplifier Applications written by Xun Liu and published by . This book was released on 2017 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Linear CMOS RF Power Amplifiers written by Hector Solar Ruiz and published by Springer Science & Business Media. This book was released on 2013-09-14 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work establishes the design flow for the optimization of linear CMOS power amplifiers from the first steps of the design to the final IC implementation and tests. The authors also focuses on design guidelines of the inductor’s geometrical characteristics for power applications and covers their measurement and characterization. Additionally, a model is proposed which would facilitate designs in terms of transistor sizing, required inductor quality factors or minimum supply voltage. The model considers limitations that CMOS processes can impose on implementation. The book also provides different techniques and architectures that allow for optimization.

Download or read book RF and mm Wave Power Generation in Silicon written by Hua Wang and published by Academic Press. This book was released on 2015-12-10 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and mm-Wave Power Generation in Silicon presents the challenges and solutions of designing power amplifiers at RF and mm-Wave frequencies in a silicon-based process technology. It covers practical power amplifier design methodologies, energy- and spectrum-efficient power amplifier design examples in the RF frequency for cellular and wireless connectivity applications, and power amplifier and power generation designs for enabling new communication and sensing applications in the mm-Wave and THz frequencies. With this book you will learn: Power amplifier design fundamentals and methodologies Latest advances in silicon-based RF power amplifier architectures and designs and their integration in wireless communication systems State-of-the-art mm-Wave/THz power amplifier and power generation circuits and systems in silicon Extensive coverage from fundamentals to advanced design topics, focusing on various layers of abstraction: from device modeling and circuit design strategy to advanced digital and mixed-signal architectures for highly efficient and linear power amplifiers New architectures for power amplifiers in the cellar and wireless connectivity covering detailed design methodologies and state-of-the-art performances Detailed design techniques, trade-off analysis and design examples for efficiency enhancement at power back-off and linear amplification for spectrally-efficient non-constant envelope modulations Extensive coverage of mm-Wave power-generation techniques from the early days of the 60 GHz research to current state-of the-art reconfigurable, digital mm-Wave PA architectures Detailed analysis of power generation challenges in the higher mm-Wave and THz frequencies and novel technical solutions for a wide range for potential applications, including ultrafast wireless communication to sensing, imaging and spectroscopy Contributions from the world-class experts from both academia and industry

Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.

Download or read book LTE The UMTS Long Term Evolution written by Stefania Sesia and published by John Wiley & Sons. This book was released on 2011-08-29 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Where this book is exceptional is that the reader will not just learn how LTE works but why it works" Adrian Scrase, ETSI Vice-President, International Partnership Projects Following on the success of the first edition, this book is fully updated, covering the latest additions to LTE and the key features of LTE-Advanced. This book builds on the success of its predecessor, offering the same comprehensive system-level understanding built on explanations of the underlying theory, now expanded to include complete coverage of Release 9 and the developing specifications for LTE-Advanced. The book is a collaborative effort of more than 40 key experts representing over 20 companies actively participating in the development of LTE, as well as academia. The book highlights practical implications, illustrates the expected performance, and draws comparisons with the well-known WCDMA/HSPA standards. The authors not only pay special attention to the physical layer, giving an insight into the fundamental concepts of OFDMA-FDMA and MIMO, but also cover the higher protocol layers and system architecture to enable the reader to gain an overall understanding of the system. Key New Features: Comprehensively updated with the latest changes of the LTE Release 8 specifications, including improved coverage of Radio Resource Management RF aspects and performance requirements Provides detailed coverage of the new LTE Release 9 features, including: eMBMS, dual-layer beamforming, user equipment positioning, home eNodeBs / femtocells and pico cells and self-optimizing networks Evaluates the LTE system performance Introduces LTE-Advanced, explaining its context and motivation, as well as the key new features including: carrier aggregation, relaying, high-order MIMO, and Cooperative Multi-Point transmission (CoMP). Includes an accompanying website containing a complete list of acronyms related to LTE and LTE-Advanced, with a brief description of each (http://www.wiley.com/go/sesia_theumts) This book is an invaluable reference for all research and development engineers involved in implementation of LTE or LTE-Advanced, as well as graduate and PhD students in wireless communications. Network operators, service providers and R&D managers will also find this book insightful.

Download or read book From GSM to LTE Advanced written by Martin Sauter and published by John Wiley & Sons. This book was released on 2014-06-23 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition of Communication Systems from GSM to LTE: An Introduction to Mobile Networks and Mobile Broadband Second Edition (Wiley 2010) contains not only a technical description of the different wireless systems available today, but also explains the rationale behind the different mechanisms and implementations; not only the ‘how’ but also the ‘why’. In this way, the advantages and also limitations of each technology become apparent. Offering a solid introduction to major global wireless standards and comparisons of the different wireless technologies and their applications, this edition has been updated to provide the latest directions and activities in 3GPP standardization up to Release 12, and importantly includes a new chapter on Voice over LTE (VoLTE). There are new sections on Building Blocks of a Voice Centric Device, Building Blocks of a Smart Phone, Fast Dormancy, IMS and High-Speed Downlink Packet Access, and Wi-Fi-Protected Setup. Other sections have been considerably updated in places reflecting the current state of the technology. • Describes the different systems based on the standards, their practical implementation and design assumptions, and the performance and capacity of each system in practice is analyzed and explained • Questions at the end of each chapter and answers on the accompanying website make this book ideal for self-study or as course material

Download or read book RF Power Amplifiers for Wireless Communications written by Steve C. Cripps and published by Artech House Publishers. This book was released on 2006-01-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensively revised edition offers a comprehensive, practical, up-to-date understanding of how to tackle a power amplifier design with confidence and quickly determine the cause of malfunctioning hardware.

Download or read book Dynamic Power Supply Transmitters written by Earl McCune and published by Cambridge University Press. This book was released on 2015-05-21 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Power is dissipated (lost) when this current flows through any resistance, which includes the amplifier's transistor. This dissipated power is the product of the current in the load times the voltage difference between the supply voltage to the amplifier and the output signal voltage. When the voltage supplied to the amplifier is a constant value, and by far the most common design practice, the situation in Fig. 1-2a results. Power dissipation in the amplifier is maximum when the output signal voltage is 1/2 of the supply voltage. When the output signal voltage is higher, even though the current value is larger the voltage drop is less and the power dissipation is lower. Similarly, when the output signal voltage is small, even though the voltage drop is now large the current in the load is smaller and again the power dissipation is lower"--

Download or read book 2021 IEEE Radio Frequency Integrated Circuits Symposium RFIC written by IEEE Staff and published by . This book was released on 2021-06-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: RFIC is the premier IC Conference focused on the latest developments in RF Microwave, and Millimeter Wave Integrated Circuit Technology and Innovation

Download or read book LTE for UMTS written by Harri Holma and published by John Wiley & Sons. This book was released on 2011-04-25 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts actively involved in the 3GPP standards and product development, LTE for UMTS, Second Edition gives a complete and up-to-date overview of Long Term Evolution (LTE) in a systematic and clear manner. Building upon on the success of the first edition, LTE for UMTS, Second Edition has been revised to now contain improved coverage of the Release 8 LTE details, including field performance results, transport network, self optimized networks and also covering the enhancements done in 3GPP Release 9. This new edition also provides an outlook to Release 10, including the overview of Release 10 LTE-Advanced technology components which enable reaching data rates beyond 1 Gbps. Key updates for the second edition of LTE for UMTS are focused on the new topics from Release 9 & 10, and include: LTE-Advanced; Self optimized networks (SON); Transport network dimensioning; Measurement results.