Download or read book Design of the 3rd Generation ECR Ion Source written by and published by . This book was released on 1997 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of the 3rd Generation ECR ion source has progressed from a concept described in the last ECR Ion Source Workshop to the fabrication of a full scale prototype superconducting magnet structure. The prototype consists of three solenoid coils and six race track coils with iron poles forming the sextupole. The design calls for mirror fields of 4 T at injection and 3 T at extraction and for a radial field strength at the wall of 2.4 T. The prototype magnet will be tested this spring in an existing vertical cryostat to determine its operating characteristics including maximum operating values, training characteristics and to study the interaction between the solenoid and sextupole coils. Design of the ECR plasma chamber includes aluminum walls to provide an enhanced source of cold electrons, up to three separate microwave feeds to allow simultaneous heating of the plasma electrons at 10, 14 and 18 GHz or at 6, 10 and 14 GHz. Water cooling of the plasma chamber walls and the injection and extraction plates is planned so that up to 10 kW of microwave power can be used without excessive heating of the chamber components. Experience with the AECR-U at LBNL shows that increasing the magnetic fields and using two frequency heating allows operation at lower neutral pressures and higher microwave power density. Both of these conditions are needed to produce very high charge states from elements with masses greater than xenon and the resulting higher energy, more intense heavy beams from the 88-Inch Cyclotron would provide new research opportunities.

Download or read book Design Study of the Extraction System of the 3rd Generation ECR Ion Source written by and published by . This book was released on 1998 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: A design study for the extraction system of the 3rd Generation super conducting ECR ion source at LBNL is presented. The magnetic design of the ion source has a mirror field of 4 T at the injection and 3 T at the extraction side and a radial field of 2.4 T at the plasma chamber wall. Therefore, the ion beam formation takes place in a strong axial magnetic field. Furthermore the axial field drops from 3 T to 0.4 T within the first 30 cm. The influence of the high magnetic field on the ion beam extraction and matching to the beam line is investigated. The extraction system is first simulated with the 2D ion trajectory code IGUN with an estimated mean charge state of the extracted ion beam. These results are then compared with the 2D code AXCEL-INP, which can simulate the extraction of ions with different charge states. Finally, the influence of the strong magnetic hexapole field is studied with the three dimensional ion optics code KOBRA. The introduced tool set can be used to optimize the extraction system of the super conducting ECR ion source.

Download or read book Development of the 3rd Generation ECR Ion Source written by and published by . This book was released on 1997 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The LBNL 3rd Generation ECR ion source has progressed from a concept to the fabrication of a full scale prototype superconducting magnet structure. This new ECR ion source will combine the recent ECR ion source techniques that significantly enhance the production of high charge state ions. The design includes a plasma chamber made from aluminum to provide additional cold electrons, three separate microwave feeds to allow multiple-frequency plasma heating (at 10, 14 and 18 GHz or at 6, 10 and 14 GHz) and very high magnetic mirror fields. The design calls for mirror fields of 4 T at injection and 3 T at extraction and for a radial field strength at the wall of 2.4 T. The prototype superconducting magnet structure which consists of three solenoid coils and six race track coils with iron poles forming the sextupole has been tested in a vertical dewar. After training, the sextupole magnet reached 105% of its design current with the solenoids off. With the solenoids operating at approximately 70% of their full design field, the sextuple coils operated at 95% of the design value which corresponds to a sextupole field strength at the plasma wall of more than 2.1 T.

Download or read book Design of a Nb3Sn Magnet for a 4th Generation ECR Ion Source written by and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The next generation of Electron Cyclotron Resonant (ECR) ion sources are expected to operate at a heating radio frequency greater than 40 GHz. The existing 3rd generation systems, exemplified by the state of the art system VENUS, operate in the 10-28 GHz range, and use NbTi superconductors for the confinement coils. The magnetic field needed to confine the plasma scales with the rf frequency, resulting in peak fields on the magnets of the 4th generation system in excess of 10 T. High field superconductors such as Nb3Sn must therefore be considered. The magnetic design of a 4th. generation ECR ion source operating at an rf frequency of 56 GHz is considered. The analysis considers both internal and external sextupole configurations, assuming commercially available Nb3Sn material properties. Preliminary structural design issues are discussed based on the forces and margins associated with the coils in the different configurations, leading to quantitative data for the determination of a final magnet design.

Download or read book The Physics and Technology of Ion Sources written by Ian G. Brown and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this title has become a well-known reference book on ion sources. The field is evolving constantly and rapidly, calling for a new, up-to-date version of the book. In the second edition of this significant title, editor Ian Brown, himself an authority in the field, compiles yet again articles written by renowned experts covering various aspects of ion source physics and technology. The book contains full chapters on the plasma physics of ion sources, ion beam formation, beam transport, computer modeling, and treats many different specific kinds of ion sources in sufficient detail to serve as a valuable reference text.

Download or read book Cyclotrons and Their Applications written by John Christopher Cornell and published by World Scientific. This book was released on 1996 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cyclotrons And Their Applications Proceedings Of The 14th International Conference written by John Christopher Cornell and published by World Scientific. This book was released on 1996-06-12 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: These conference proceedings will be of interest to all accelerator scientists and engineers, as well as those concerned with the application of cyclotrons in various fields. The conference covers the latest developments in the science, technology and use of cyclotrons, and includes more than 25 invited talks by specialists in their respective fields. Contributions include papers on newly operating cyclotrons and facilities under construction, compact cyclotrons, cooler rings and post-accelerators, ion sources, beam dynamics, beam diagnostics, cyclotron components, systems and technologies, as well as medical applications — including radiotherapy and radioisotope production — non-medical applications, radioactive beam facilities and new projects and proposals.

Download or read book Heavy Ion Accelerator Technology Eighth International Conference written by Kenneth W. Shepard and published by American Inst. of Physics. This book was released on 1999-04-28 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic ion accelerators and associated superconducting linacs were the class of accelerators discussed. Continuing the trend of the last several meetings in this series, two sessions were needed to report current developments in superconducting ion accelerators. Also, many interesting recent developments were reported in a session devoted to ECR ion sources. Several applications received attention. A session was devoted to atomic mass spectroscopy. Both because of the venue and the timeliness of the topic, two sessions and a number of poster presentations focussed on the technology needed for beams of exotic, radioactive nuclei.

Download or read book The Propagation of Radio Waves written by K. G. Budden and published by Cambridge University Press. This book was released on 1988-08-04 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the ionosphere and the magnetosphere, and the theory of their effect on radio waves. It includes accounts of some mathematical topics now widely used in this study, particularly W. K. B. approximations, Airy integral functions and integration by steepest descents. The subject is divided into ray theory and full wave theory. Ray theory is useful for high frequencies when the ionosphere is treated as a horizonally stratified medium. The discussion of the magnetosphere, whose structure is more complicated, includes an account of whistlers and ion cyclotron whistlers. The book has been planned both for final year undergraduates and as a reference book for research. It is suitable as a course book on radio propagation for students of physics or electrical engineering or mathematics. Some of the topics are presented from an elementary viewpoint so as to help undergraduates new to the subject. The later parts are more advanced. Because the subject is so large and has seen many important recent advances, some topics have had to be treated briefly, but there is a full bibliography with about 600 references.

Download or read book Electron Cyclotron Resonance Ion Sources and ECR Plasmas written by R Geller and published by Routledge. This book was released on 2018-12-13 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acknowledged as the "founding father" of and world renowned expert on electron cyclotron resonance sources Richard Geller has produced a unique book devoted to the physics and technicalities of electron cyclotron resonance sources. Electron Cyclotron Resonance Ion Sources and ECR Plasmas provides a primer on electron cyclotron phenomena in ion sour

Download or read book Trapping Highly Charged Ions written by John Gillaspy and published by Nova Publishers. This book was released on 2001 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides and elementary introduction to the field of trapping highly charged ions. The first group of chapters is intended to describe the various sorts of highly charged ion traps: EBIT, EBIS, ECR, Storage Rings and various speciality traps. The authors focus on their own ion trap facilities in order to teach by example. The chapters range in scope from comprehensive reviews to brief introductions. The second group of chapters is intended to give a flavour of the various sorts of scientific research which are presently being carried out with traps for highly charged ions. These chapters not only inform, but also stimulate newcomers to think up fresh ideas. The articles in this second group generally fall into one of three broad categories: atomic structure experiments, ion-surface interactions and precision mass spectrometry. The third group of chapters is intended to deal with theory and spectroscopic analysis. It provides some of the background material necessary to make sense of observed phenomenology, to allow detailed explanation of experimental data, and to sensibly plan further experimentation. An appendix provides a complete keyword-annotated bibliography of pa

Download or read book Fundamentals of Electric Propulsion written by Dan M. Goebel and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout most of the twentieth century, electric propulsion was considered the technology of the future. Now, the future has arrived. This important new book explains the fundamentals of electric propulsion for spacecraft and describes in detail the physics and characteristics of the two major electric thrusters in use today, ion and Hall thrusters. The authors provide an introduction to plasma physics in order to allow readers to understand the models and derivations used in determining electric thruster performance. They then go on to present detailed explanations of: Thruster principles Ion thruster plasma generators and accelerator grids Hollow cathodes Hall thrusters Ion and Hall thruster plumes Flight ion and Hall thrusters Based largely on research and development performed at the Jet Propulsion Laboratory (JPL) and complemented with scores of tables, figures, homework problems, and references, Fundamentals of Electric Propulsion: Ion and Hall Thrusters is an indispensable textbook for advanced undergraduate and graduate students who are preparing to enter the aerospace industry. It also serves as an equally valuable resource for professional engineers already at work in the field.

Download or read book Nb3Sn Superconducting Magnets for Electron Cyclotron Resonance Ion Sources written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron cyclotron resonance (ECR) ion sources are an essential component of heavy-ion accelerators. Over the past few decades advances in magnet technology and an improved understanding of the ECR ion source plasma physics have led to remarkable performance improvements of ECR ion sources. Currently third generation high field superconducting ECR ion sources operating at frequencies around 28 GHz are the state of the art ion injectors and several devices are either under commissioning or under design around the world. At the same time, the demand for increased intensities of highly charged heavy ions continues to grow, which makes the development of even higher performance ECR ion sources a necessity. To extend ECR ion sources to frequencies well above 28 GHz, new magnet technology will be needed in order to operate at higher field and force levels. The superconducting magnet program at LBNL has been developing high field superconducting magnets for particle accelerators based on Nb3Sn superconducting technology for several years. At the moment, Nb3Sn is the only practical conductor capable of operating at the 15 T field level in the relevant configurations. Recent design studies have been focused on the possibility of using Nb3Sn in the next generation of ECR ion sources. In the past, LBNL has worked on the VENUS ECR, a 28 GHz source with solenoids and a sextupole made with NbTi operating at fields of 6-7 T. VENUS has now been operating since 2004. We present in this paper the design of a Nb3Sn ECR ion source optimized to operate at an rf frequency of 56 GHz with conductor peak fields of 13-15 T. Because of the brittleness and strain sensitivity of Nb3Sn-, particular care is required in the design of the magnet support structure, which must be capable of providing support to the coils without overstressing the conductor. In this paper, we present the main features of the support structure, featuring an external aluminum shell pretensioned with water-pressurized bladders, and we analyze the expected coil stresses with a two-dimensional finite element mechanical model.

Download or read book ERDA Energy Research Abstracts written by and published by . This book was released on 1989 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book European Particle Accelerator Conference Epac 94 In 3 Volumes written by Christine Petit-jean-genaz and published by World Scientific. This book was released on 1994-11-26 with total page 2968 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings aim to provide a comprehensive overview of research, technology and applications in the field of accelerators. Contributions from the entire field of accelerators are presented, including low and high energy machines, and medical and industrial accelerators.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.