Download or read book Design of Reactive Extraction Systems for Bioproduct Recovery written by Rajaram A. Pai and published by . This book was released on 2001 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactive Extraction written by Hans-Jörg Bart and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This booklet is designed to bridge the gap between handbooks and technical literature and aims at graduate students or experienced readers. Commercial flow sheeting simulation software is increasingly available and is used in the early steps of process design in industry. As to this, more sophisticated and precise models based on activities instead of concentrations should be used. After an introductory chapter there is in Chapter 2 an intensive discussion of reactive phase equilibria of ionic and non-ionic solutes based on chemical potentials. Chapter 3 introduces to multicomponent diffusion and mass transfer. However, the main focus is on the reactive mass transfer on rigid and mobile surfaces where the interfacial reaction, molecular diffusion and adsorption layers are decisive. The respective extraction of zinc with a cation exchanger and of acetic acid with an anion exchanger is discussed as case studies. Since adsorption layers and surfactants have a major impact on liquid-liquid extraction efficiency, the final chapter reviews several tech niques which make use of polymeric species in an extractive process. A short review is also given on extraction apparatus and the hydrodynamics (hydraulic design, droplet populance balances) of columns. Much of the booklet is based on the PhD works of C. Czapla (2000), G. Modes (2000), H. Klocker (1996), T. Kronberger (1995), M. Marters (2000), M. Roos (2000), M. Traving (2000) and B. Wachter (1996) who I wish to thank for their fruitful contributions.
Download or read book Reactive Separation for Process Intensification and Sustainability written by Carlos Ariel Cardona Alzate and published by CRC Press. This book was released on 2019-12-23 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes, analyses and discusses the main principles, phenomena and design strategies of reactive separation processes with an emphasis on the intensification as a basis of the sustainability. Different reactive separation processes are explained in detail to show the phenomena and with the purpose of understanding when their use allows advantages based on the output results. Case examples are analysed and the perspective of these processes in the future is discussed. The overall sustainability of reactive separation processes in the industry is also explained separately.
Download or read book Computer Applications in Biotechnology 2004 written by Marie-Noelle Pons and published by Elsevier. This book was released on 2005-08-02 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass based Clean Technologies for Sustainable Development written by Dan Bahadur Pal and published by Springer Nature. This book was released on with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biodiesel Technology and Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-06-16 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: BIODIESEL This outstanding new volume provides a comprehensive overview on biodiesel technologies, covering a broad range of topics and practical applications, edited by one of the most well-respected and prolific engineers in the world and his team. Energy technologies have attracted great attention due to the fast development of sustainable energy. Biodiesel technologies have been identified as the sustainable route through which overdependence on fossil fuels can be reduced. Biodiesel has played a key role in handling the growing challenge of a global climate change policy. Biodiesel is defined as the monoalkyl esters of vegetable oils or animal fats. Biodiesel is a cost-effective, renewable, and sustainable fuel that can be made from vegetable oils and animal fats. Compared to petroleum-based diesel, biodiesel would offer a non-toxicity, biodegradability, improved air quality and positive impact on the environment, energy security, safe-to-handle, store and transport and so on. Biodiesels have been used as a replacement of petroleum diesel in transport vehicles, heavy-duty trucks, locomotives, heat oils, hydrogen production, electricity generators, agriculture, mining, construction, and forestry equipment. This book describes a comprehensive overview, covering a broad range of topics on biodiesel technologies and allied applications. Chapters cover history, properties, resources, fabrication methods, parameters, formulations, reactors, catalysis, transformations, analysis, in situ spectroscopies, key issues and applications of biodiesel technology. It also includes biodiesel methods, extraction strategies, biowaste utilization, oleochemical resources, non-edible feedstocks, heterogeneous catalysts, patents, and case-studies. Progress, challenges, future directions, and state-of-the-art biodiesel commercial technologies are discussed in detail. This book is an invaluable resource guide for professionals, faculty, students, chemical engineers, biotechnologists, and environmentalists in these research and development areas. This outstanding new volume: Summarizes the recent developments in this rapidly-developing, multi-disciplinary field Provides the reader with a practical understanding of biodiesel technology toward the real-world applications Formulates concepts, case-studies, patents, and applications helpful in decision making and problem-solving, in a single resource Delivers state-of-the-art information on biodiesel technology Audience: Chemical and process engineers and other professionals, faculty, students, scientists, biotechnologists, and environmental engineers
Download or read book Separation and Purification Technologies in Biorefineries written by Shri Ramaswamy and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation and purification processes play a critical role in biorefineries and their optimal selection, design and operation to maximise product yields and improve overall process efficiency. Separations and purifications are necessary for upstream processes as well as in maximising and improving product recovery in downstream processes. These processes account for a significant fraction of the total capital and operating costs and also are highly energy intensive. Consequently, a better understanding of separation and purification processes, current and possible alternative and novel advanced methods is essential for achieving the overall techno-economic feasibility and commercial success of sustainable biorefineries. This book presents a comprehensive overview focused specifically on the present state, future challenges and opportunities for separation and purification methods and technologies in biorefineries. Topics covered include: Equilibrium Separations: Distillation, liquid-liquid extraction and supercritical fluid extraction. Affinity-Based Separations: Adsorption, ion exchange, and simulated moving bed technologies. Membrane Based Separations: Microfiltration, ultrafiltration and diafiltration, nanofiltration, membrane pervaporation, and membrane distillation. Solid-liquid Separations: Conventional filtration and solid-liquid extraction. Hybrid/Integrated Reaction-Separation Systems: Membrane bioreactors, extractive fermentation, reactive distillation and reactive absorption. For each of these processes, the fundamental principles and design aspects are presented, followed by a detailed discussion and specific examples of applications in biorefineries. Each chapter also considers the market needs, industrial challenges, future opportunities, and economic importance of the separation and purification methods. The book concludes with a series of detailed case studies including cellulosic bioethanol production, extraction of algae oil from microalgae, and production of biopolymers. Separation and Purification Technologies in Biorefineries is an essential resource for scientists and engineers, as well as researchers and academics working in the broader conventional and emerging bio-based products industry, including biomaterials, biochemicals, biofuels and bioenergy.
Download or read book Solvent Extraction in Biotechnology written by Karl Schügerl and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solvent Extraction in Biotechnology deals with the reco- very and purification of primary and secondary metabolites by solvent extraction. In the first part the reaction engineering principles: definitions, thermodynamic fundamentals, and system models, the kinetics of mass transfer between two phases without and with chemical reaction as well as extraction equipment, which are important for downstream processing in biotechnology, are considered in detail. The special part of the book describes the recovery of low-molecular metabolites: alcohols, acids and antibiotics with organic solvents, carrier-modifier-solvent systems, supercritical gases as well as with liquid membrane techniques. Several practical examples are given for the recovery of different metabolites as well as for the calculation of the extraction processes necessary for equipment design. Besides solvent extraction, novel separation techniques with liquid membrane, microemulsion and reversed micelles are also presented. This book will introduce the biochemical engineer and process engineer to the recovery of products from complex cultivation broths by modern techniques of solvent extraction and help them with process design.
Download or read book Bioprocessing of Renewable Resources to Commodity Bioproducts written by Virendra S. Bisaria and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the vision of a successful biorefinery—the lignocelluloic biomass needs to be efficiently converted to its constituent monomers, comprising mainly of sugars such as glucose, xylose, mannose and arabinose. Accordingly, the first part of the book deals with aspects crucial for the pretreatment and hydrolysis of biomass to give sugars in high yield, as well as the general aspects of bioprocessing technologies which will enable the development of biorefineries through inputs of metabolic engineering, fermentation, downstream processing and formulation. The second part of the book gives the current status and future directions of the biological processes for production of ethanol (a biofuel as well as an important commodity raw material), solvents (butanol, isobutanol, butanediols, propanediols), organic acids (lactic acid, 3-hydroxy propionic acid, fumaric acid, succinic acid and adipic acid), and amino acid (glutamic acid). The commercial production of some of these commodity bioproducts in the near future will have a far reaching effect in realizing our goal of sustainable conversion of these renewable resources and realizing the concept of biorefinery. Suitable for researchers, practitioners, graduate students and consultants in biochemical/ bioprocess engineering, industrial microbiology, bioprocess technology, metabolic engineering, environmental science and energy, the book offers: Exemplifies the application of metabolic engineering approaches for development of microbial cell factories Provides a unique perspective to the industry about the scientific problems and their possible solutions in making a bioprocess work for commercial production of commodity bioproducts Discusses the processing of renewable resources, such as plant biomass, for mass production of commodity chemicals and liquid fuels to meet our ever- increasing demands Encourages sustainable green technologies for the utilization of renewable resources Offers timely solutions to help address the energy problem as non-renewable fossil oil will soon be unavailable
Download or read book Extractant Design for the Separation of Enantiomers by Reactive Extraction written by M. Steensma and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Progress written by and published by . This book was released on 2002 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Membrane Supported Reactive Extraction Using Membranes with Enhanced Stability written by Angelo Tino Gössi and published by . This book was released on 2022 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process and Chemical Engineering written by and published by . This book was released on 2002 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Membrane Technology written by Suzana Pereira Nunes and published by John Wiley & Sons. This book was released on 2006-12-13 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Technology - a clean and energy saving alternative to traditional/conventional processes. Developed from a useful laboratory technique to a commercial separation technology, today it has widespread and rapidly expanding use in the chemical industry. It has established applications in areas such as hydrogen separation and recovery of organic vapors from process gas streams, and selective transport of organic solvents, and it is opening new perspectives for catalytic conversion in membrane reactors. Membrane technology provides a unique solution for industrial waste treatment and for controlled production of valuable chemicals. This book outlines several established applications of membranes in the chemical industry, reviews the available membranes and membrane processes for the field, and discusses the huge potential of this technology in chemical processes. Each chapter has been written by an international leading expert with extensive industrial experience in the field.
Download or read book Aqueous Two Phase Systems for Bioprocess Development for the Recovery of Biological Products written by Marco Rito-Palomares and published by Springer. This book was released on 2018-09-11 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and unique text presents a full overview of downstream processing useful for those new to the concept as well as professionals with experience in the area. The history and theoretical principles of Aqueous Two-Phase Systems (ATPS) are covered in depth. Information on ATPS characterization and application is included, and ATPS equilibria and system parameters that have significant effect on partition behavior are studied. Aqueous Two-Phase Systems for Bioprocess Development for the Recovery of Biological Products addresses specific applications of ATPS for the recovery and partial purification of high molecular weight compounds such as proteins, nucleic acids and polysaccharides, particulate bioproducts such as cells and organelles and low molecular weight compounds. Non-conventional strategies involving ATPS such as affinity systems, continuous liquid-liquid fractionation stages and the recovery from plant extracts are presented. Economic analysis of the application of ATPS in comparison to other fractionation techniques, particularly liquid chromatography, is considered, as are opportunity and current trends in the ATPS research area. Each chapter utilizes the contributors' experimental expertise in traditional and non-conventional ATPS strategies, as well as analysis of areas of opportunity and perspectives on the development and future applications of ATPS in both the lab and larger scale operations. The result is a thorough and singular overview of ATPS which has not been matched by any other text on the market.
Download or read book Process Systems Engineering for Biofuels Development written by Adrian Bonilla-Petriciolet and published by John Wiley & Sons. This book was released on 2020-07-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of current developments and applications in biofuels production Process Systems Engineering for Biofuels Development brings together the latest and most cutting-edge research on the production of biofuels. As the first book specifically devoted to process systems engineering for the production of biofuels, Process Systems Engineering for Biofuels Development covers theoretical, computational and experimental issues in biofuels process engineering. Written for researchers and postgraduate students working on biomass conversion and sustainable process design, as well as industrial practitioners and engineers involved in process design, modeling and optimization, this book is an indispensable guide to the newest developments in areas including: Enzyme-catalyzed biodiesel production Process analysis of biodiesel production (including kinetic modeling, simulation and optimization) The use of ultrasonification in biodiesel production Thermochemical processes for biomass transformation to biofuels Production of alternative biofuels In addition to the comprehensive overview of the subject of biofuels found in the Introduction of the book, the authors of various chapters have provided extensive discussions of the production and separation of biofuels via novel applications and techniques.
Download or read book Large sample Extraction Systems with Analytical Solvent Recovery for Low flow Applications written by D. H. J. Anthony and published by . This book was released on 1994 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
