Download or read book Design of Municipal Wastewater Treatment Plants MOP 8 Fifth Edition written by Water Environment Federation and published by McGraw Hill Professional. This book was released on 2009-10-02 with total page 2991 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary Municipal Wastewater Treatment Plant Design Methods Fully revised and updated, this three-volume set from the Water Environment Federation and the Environmental and Water Resources Institute of the American Society of Civil Engineers presents the current plant planning, configuration, and design practices of wastewater engineering professionals, augmented by performance information from operating facilities. Design of Municipal Wastewater Treatment Plants, Fifth Edition, includes design approaches that reflect the experience of more than 300 authors and reviewers from around the world. Coverage includes: Integrated facility design Sustainability and energy management Plant hydraulics and pumping Odor control and air emissions Thoroughly updated information on biofilm reactors Biological, physical, and chemical liquid treatment Membrane bioreactors, IFAS, and other integrated biological processes Nutrient removal Sidestream treatment Wastewater disinfection Solids minimization, treatment, and stabilization, including thermal processing Biosolids use and disposal
Download or read book Design of Water Resource Recovery Facilities Manual of Practice No 8 Sixth Edition written by Water Environment Federation and published by McGraw Hill Professional. This book was released on 2017-09-29 with total page 2257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete Coverage of the State-of-the-Art in Water Resource Recovery Facility Design Featuring contributions from hundreds of wastewater engineering experts, this fully updated guide presents the latest in facility planning, configuration, and design. Design of Water Resource Recovery Facilities: WEF Manual of Practice No. 8 and ASCE Manuals and Reports on Engineering Practice No. 76, Sixth Edition, covers key technical advances in wastewater treatment, including •Advances with membrane bioreactors applications •Advancements within integrated fixed-film/activated sludge (IFAS) systems and moving-bed biological-reactors systems •Biotrickling filtration for odor control •Increased use of ballasted flocculation •Enhanced nutrient-control systems •Sidestream nutrient removal to reduce the loading on the main nutrient-removal process •Use and application of wireless instrumentation •Use and application of modeling wastewater treatment processes for the basis of design and evaluations of alternatives •Process design and disinfection practices to minimize generation of TTHMs and other organics monitored for potable water quality •Approaches to minimizing biosolids production and advances in biosolids handling, including effective thermal hydrolysis, and improvements in sludge thickening and dewatering technologies •Increasing goals toward energy neutrality and driving net zero •Trend toward resource recovery
Download or read book Process Design Manual for Upgrading Existing Wastewater Treatment Plants written by Metcalf & Eddy and published by . This book was released on 1974 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Municipal Wastewater Treatment Plants written by Joint Task Force of the Water Environment Federation and the American Society of Civil Engineers and published by . This book was released on 1992 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Assessment of Treatment Plant Performance and Water Quality Data A Guide for Students Researchers and Practitioners written by Marcos von Sperling and published by IWA Publishing. This book was released on 2020-01-15 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic principles for evaluating water quality and treatment plant performance in a clear, innovative and didactic way, using a combined approach that involves the interpretation of monitoring data associated with (i) the basic processes that take place in water bodies and in water and wastewater treatment plants and (ii) data management and statistical calculations to allow a deep interpretation of the data. This book is problem-oriented and works from practice to theory, covering most of the information you will need, such as (a) obtaining flow data and working with the concept of loading, (b) organizing sampling programmes and measurements, (c) connecting laboratory analysis to data management, (e) using numerical and graphical methods for describing monitoring data (descriptive statistics), (f) understanding and reporting removal efficiencies, (g) recognizing symmetry and asymmetry in monitoring data (normal and log-normal distributions), (h) evaluating compliance with targets and regulatory standards for effluents and water bodies, (i) making comparisons with the monitoring data (tests of hypothesis), (j) understanding the relationship between monitoring variables (correlation and regression analysis), (k) making water and mass balances, (l) understanding the different loading rates applied to treatment units, (m) learning the principles of reaction kinetics and reactor hydraulics and (n) performing calibration and verification of models. The major concepts are illustrated by 92 fully worked-out examples, which are supported by 75 freely-downloadable Excel spreadsheets. Each chapter concludes with a checklist for your report. If you are a student, researcher or practitioner planning to use or already using treatment plant and water quality monitoring data, then this book is for you! 75 Excel spreadsheets are available to download.
Download or read book Sanitation Safety Planning written by World Health Organization and published by World Health Organization. This book was released on 2015-08-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Sanitation Safety Planning (SSP) is a step-by-step risk based approach to assist in the implementation of the 2006 WHO Guidelines for Safe Use of Wastewater, Excreta and Greywater in Agriculture and Aquaculture. The approach can be applied to all sanitary systems to ensure the system is managed to meet health objectives. SSP assists users to: systematically identify and manage health risk along the sanitation chain; guide investment based on actual risks, to promote health benefits and minimize adverse health impacts; provide assurance to authorities and the public on the safety of sanitation-related products and services. The SSP manual is targeted at a variety of users at different levels including; health authorities and regulators, local authorities, wastewater utility managers, sanitation enterprises and farmers, community based organizations, farmers associations and NGOs. SSP brings together actors from different sectors to identify health risks in the sanitation system and agree on improvements and regular monitoring and underscores the leadership role of the health sector."--Publisher's description.
Download or read book Wastewater Treatment and Reuse Theory and Design Examples Volume 2 written by Syed R. Qasim and published by CRC Press. This book was released on 2017-11-22 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will present the theory involved in wastewater treatment processes, define the important design parameters involved, and provide typical values of these parameters for ready reference; and also provide numerical applications and step-by-step calculation procedures in solved examples. These examples and solutions will help enhance the readers’ comprehension and deeper understanding of the basic concepts, and can be applied by plant designers to design various components of the treatment facilities. It will also examine the actual calculation steps in numerical examples, focusing on practical application of theory and principles into process and water treatment facility design.
Download or read book EPA 625 1 written by and published by . This book was released on 1983-10 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Upgrading Existing Wastewater Treatment Plants written by United States. Environmental Protection Agency and published by . This book was released on 1977 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Water and Used Water Purification written by Josef Lahnsteiner and published by Springer Nature. This book was released on 2021-01-08 with total page 1325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses the entire water cycle. The focus is on new technologies/processes (especially in high performance biological treatment), energy recovery, water recycling and reuse. Recommendations with regard to the right technologies/processes for specific situations are provided and a wide range of case studies, especially in emerging markets. In addition, the most modern water terminology with more positive connotations is used. This is especially important in the field of direct and indirect potable reuse (DPR and IPR respectively).
Download or read book Sludge Reduction Technologies in Wastewater Treatment Plants written by Paola Foladori and published by IWA Publishing. This book was released on 2010-07-31 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Reduction Technologies in Wastewater Treatment Plants is a review of the sludge reduction techniques integrated in wastewater treatment plants with detailed chapters on the most promising and most widespread techniques. The aim of the book is to update the international community on the current status of knowledge and techniques in the field of sludge reduction. It will provide a comprehensive understanding of the following issues in sludge reduction: principles of sludge reduction techniques; process configurations; potential performance; advantages and drawbacks; economics and energy consumption. This book will be essential reading for managers and technical staff of wastewater treatment plants as well as graduate students and post-graduate specialists.
Download or read book Water Science and Technology written by Nicholas Gray and published by CRC Press. This book was released on 2017-04-07 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water has become one of the most important issues of our time intertwined with global warming and population expansion. The management of water supplies and the conservation of water resources remains one of the most challenging yet exciting issues of our time. Water and wastewater treatment technologies are constantly evolving creating an increasingly sustainable industry that is one of the world's largest and most interdisciplinary sectors, employing chemists, microbiologists, botanists, zoologists as well as engineers, computer specialists and a range of different management professionals. This accessible student textbook introduces the reader to the key concepts of water science and technology by explaining the fundamentals of hydrobiology, aquatic ecosystems, water treatment and supply, wastewater treatment and integrated catchment management. This fourth edition is extensively changed throughout, with new coverage of the effects of climate change, environmental assessment, sustainability and the threat to biodiversity. The text serves as a primer for both undergraduate and graduate students in either science or engineering who have an interested in freshwater biology/hydrobiology or environmental engineering. It is also useful as a unified transitional course for those who want to span the traditional areas of engineering, biology, chemistry, microbiology or business. Professionals and consultants will also find the book a useful reference.
Download or read book Environmental Engineering written by Richard O. Mines, Jr. and published by John Wiley & Sons. This book was released on 2014-03-04 with total page 1728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Engineering: Principles and Practice is written for advanced undergraduate and first-semester graduate courses in the subject. The text provides a clear and concise understanding of the major topic areas facing environmental professionals. For each topic, the theoretical principles are introduced, followed by numerous examples illustrating the process design approach. Practical, methodical and functional, this exciting new text provides knowledge and background, as well as opportunities for application, through problems and examples that facilitate understanding. Students pursuing the civil and environmental engineering curriculum will fi nd this book accessible and will benefit from the emphasis on practical application. The text will also be of interest to students of chemical and mechanical engineering, where several environmental concepts are of interest, especially those on water and wastewater treatment, air pollution, and sustainability. Practicing engineers will find this book a valuable resource, since it covers the major environmental topics and provides numerous step-by-step examples to facilitate learning and problem-solving. Environmental Engineering: Principles and Practice offers all the major topics, with a focus upon: • a robust problem-solving scheme introducing statistical analysis; • example problems with both US and SI units; • water and wastewater design; • sustainability; • public health. There is also a companion website with illustrations, problems and solutions.
Download or read book Municipal Water and Waste Water Treatment written by Rakesh Kumar and published by The Energy and Resources Institute (TERI). This book was released on 2006-01-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water is the earth's most ubiquitous and most effective dissolving agent, playing a key role in human civilization. A variety of natural and human factors affect the quality and use of surface and groundwater. This course book simplifies the concepts of water and waste water treatment.
Download or read book Guidance for Preparing a Facility Plan written by United States. Environmental Protection Agency. Office of Water Program Operations. Municipal Construction Division and published by . This book was released on 1975 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Works Engineering written by Syed R. Qasim and published by Prentice Hall. This book was released on 2000 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the most in-depth, step-by-step coverage available of contemporary water treatment plant planning, design and operations. Readers can walk step by step through water treatment plant planning and design, including predesign reports, problem definition, site selection and more.
Download or read book Innovative Wastewater Treatment Resource Recovery Technologies Impacts on Energy Economy and Environment written by Juan M. Lema and published by IWA Publishing. This book was released on 2017-06-15 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.
