Download or read book Gas Cyclones and Swirl Tubes written by Alex C. Hoffmann and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been conceived to provide guidance on the theory and design of cyclone systems. Forthose new to the topic, a cyclone is, in its most basic form, a stationary mechanical device that utilizes centrifugal force to separate solid or liquid particles from a carrier gas. Gas enters near the top via a tangential or vaned inlet, which gives rise to an axially descending spiral of gas and a centrifugal force field that causes the incoming particles to concentrate along, and spiral down, the inner walls of the separator. The thus-segregated particulate phase is allowed to exit out an underflow pipe while the gas phase constricts, and - in most separators - reverses its axial direction of flow and exits out a separate overflow pipe. Cyclones are applied in both heavy and light industrial applications and may be designed as either classifiers or separators. Their applications are as plentiful as they are varied. Examples include their use in the separation or classification of powder coatings, plastic fines, sawdust, wood chips, sand, sintered/powdered meta!, plastic and meta! pellets, rock and mineral cmshings, carbon fines, grain products, pulverized coal, chalk, coal and coal ash, catalyst and petroleum coke fines, mist entrained off of various processing units and liquid components from scmbbing and drilling operations. They have even been applied to separate foam into its component gas and liquid phases in recent years.

Download or read book Turbulence and Interactions written by Michel O. Deville and published by Springer. This book was released on 2014-06-13 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a snapshot of the state-of-art in the field of turbulence modeling and covers the latest developments concerning direct numerical simulations, large eddy simulations, compressible turbulence, coherent structures, two-phase flow simulation and other related topics. It provides readers with a comprehensive review of both theory and applications, describing in detail the authors’ own experimental results. The book is based on the proceedings of the third Turbulence and Interactions Conference (TI 2012), which was held on June 11-14 in La Saline-les-Bains, La Réunion, France and includes both keynote lectures and outstanding contributed papers presented at the conference. This multifaceted collection, which reflects the conference ́s emphasis on the interplay of theory, experiments and computing in the process of understanding and predicting the physics of complex flows and solving related engineering problems, offers a practice-oriented guide for students, researchers and professionals in the field of computational fluid dynamics, turbulence modeling and related areas.

Download or read book Circulating Fluidized Beds written by J.R. Grace and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 1970s there has been an explosion of industrial and academic interest in circulating fluidized beds. In part, the attention has arisen due to the environmental advantages associated with CFB (circulating . fluidized bed) combustion systems, the incorporation of riser reactors employing cir culating fluidized bed technology in petroleum refineries for fluid catalytic cracking and, to a lesser extent, the successes of CFB technology for calcina tion reactions and Fischer-Tropsch synthesis. In part, it was also the case that too much attention had been devoted to bubbling fluidized beds and it was time to move on to more complex and more advantageous regime,S of operation. Since 1980 a number of CFB processes have been commercialized. There have been five successful International Circulating Fluidized Bed Confer ences beginning in 1985, the most recent taking place in Beijing in May 1996. In addition, we have witnessed a host of other papers on CFB funda mentals and applications in journals and other archival publications. There have also been several review papers and books on specific CFB topics. However, there has been no comprehensive book reviewing the field and attempting to provide an overview of both fundamentals and applications. The purpose of this book is to fill this vacuum.

Download or read book The Hydrocyclone written by D. Bradley and published by Elsevier. This book was released on 2013-10-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Hydrocyclone reviews data on the theoretical, design, and performance aspects of the liquid cyclone, hydraulic cyclone, or hydrocyclone. The book aims to be a source of reference to those who are in industries employing the use and application of the hydrocyclone. The text covers the historical development of the cyclone; flow pattern and distribution of velocities within the cyclone body; operational characteristics and areas of application in different phase separations; and the operating and design variables affecting the performance of the hydrocyclone. Categories of cyclone; commercially available cyclone equipment; and the specific industrial applications of the hydrocyclone are also surveyed. The text will be of practical use to industrial engineers, mechanical engineers, plant operators, miners, and researchers.

Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."

Download or read book Hydrocyclones written by L. Svarovsky and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is with great pleasure and satisfaction that we introduce this volume which comprises the papers accepted for the 4th International Conference on Hydrocyclones held in Southampton from 23rd to 25th September 1992. As the name implies, this is the fourth Conference in the series, with the previous ones held in Cambridge in 1980, Bath in 1984 and Oxford in 1987. The papers cover a wide span of activities, from fundamental research to advances in industrial practice and, as in the earlier volumes, make a significant contribution of lasting value to the technical literature on hydrocyclones. Hydrocyclones continue to widen their appeal to engineers; besides their traditional role in mineral processing they now attract a lot of attention in chemical engineering, the oil and gas industry, power generation, the food industry, textiles, metal working, waste water treatment, pharmaceuticals, biotechnology and other industries. The reason for this continuously increasing attention is, as David Parkinson (General Manager of Conoco (UK)) said recently, that" ... a hydrocyclone is an engineering dream, a machine with no moving parts." Yet as this Volume clearly shows, the hydrocyclone can do so many things and do them well, whether the application is in solid-liquid, liquid-liquid or liquid-gas separation.

Download or read book Production Handling and Characterization of Particulate Materials written by Henk G. Merkus and published by Springer. This book was released on 2015-11-26 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents most techniques and methods that have been developed by material scientists, chemists, chemical engineers and physicists for the commercial production of particulate materials, ranging from the millimeter to the nanometer scale. The scope includes the physical and chemical background, experimental optimization of equipment and procedures, as well as an outlook on future methods. The books addresses issues of industrial importance such as specifications, control parameter(s), control strategy, process models, energy consumption and discusses the various techniques in relation to potential applications. In addition to the production processes, all major unit operations and characterization methods are described in this book. It differs from other books which are devoted to a single technique or a single material. Contributors to this book are acknowledged experts in their field. The aim of the book is to facilitate comparison of the different unit operations leading to optimum equipment choices for the production, handling and storage of particulate materials. An advantage of this approach is that unit operations that are common in one field of application are made accessible to other fields. The overall focus is on industrial application and the book includes some concrete examples. The book is an essential resource for students or researchers who work in collaboration with manufacturing industries or who are planning to make the switch from academia to industry.

Download or read book Non conventional Unit Operations written by Alessandro Di Pretoro and published by Springer Nature. This book was released on 2020-01-09 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents both methodologies and numerical applications for the design of non-conventional unit operations in chemical processes and plants, which are rarely studied in depth at an academic level but have wide applications in the industrial sector. The first part discusses the design, comparison and optimization of heating and cooling operations that are different from simple heat exchange. The second and larger part offers a brief but effective overview of non-conventional separation processes, mainly focusing on the heterogeneous phases. Based on sample case studies, it extrapolates the process model equations and includes the numerical solution in order to provide a straightforward application example. The end of each chapter features a C++ code implementation to solve the ODE or nonlinear equations system using the BzzMath library.

Download or read book Chemical Process Design and Simulation Aspen Plus and Aspen Hysys Applications written by Juma Haydary and published by John Wiley & Sons. This book was released on 2019-01-16 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and example oriented text for the study of chemical process design and simulation Chemical Process Design and Simulation is an accessible guide that offers information on the most important principles of chemical engineering design and includes illustrative examples of their application that uses simulation software. A comprehensive and practical resource, the text uses both Aspen Plus and Aspen Hysys simulation software. The author describes the basic methodologies for computer aided design and offers a description of the basic steps of process simulation in Aspen Plus and Aspen Hysys. The text reviews the design and simulation of individual simple unit operations that includes a mathematical model of each unit operation such as reactors, separators, and heat exchangers. The author also explores the design of new plants and simulation of existing plants where conventional chemicals and material mixtures with measurable compositions are used. In addition, to aid in comprehension, solutions to examples of real problems are included. The final section covers plant design and simulation of processes using nonconventional components. This important resource: Includes information on the application of both the Aspen Plus and Aspen Hysys software that enables a comparison of the two software systems Combines the basic theoretical principles of chemical process and design with real-world examples Covers both processes with conventional organic chemicals and processes with more complex materials such as solids, oil blends, polymers and electrolytes Presents examples that are solved using a new version of Aspen software, ASPEN One 9 Written for students and academics in the field of process design, Chemical Process Design and Simulation is a practical and accessible guide to the chemical process design and simulation using proven software.

Download or read book Aerosol Technology written by William C. Hinds and published by John Wiley & Sons. This book was released on 2012-12-06 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The #1 guide to aerosol science and technology -now better than ever Since 1982, Aerosol Technology has been the text of choice among students and professionals who need to acquire a thorough working knowledge of modern aerosol theory and applications. Now revised to reflect the considerable advances that have been made over the past seventeen years across a broad spectrum of aerosol-related application areas - from occupational hygiene and biomedical technology to microelectronics and pollution control -this new edition includes: * A chapter on bioaerosols * New sections on resuspension, transport losses, respiratory deposition models, and fractal characterization of particles * Expanded coverage of atmospheric aerosols, including background aerosols and urban aerosols * A section on the impact of aerosols on global warming and ozone depletion. Aerosol Technology, Second Edition also features dozens of new, fully worked examples drawn from a wide range of industrial and research settings, plus new chapter-end practice problems to help readers master the material quickly.

Download or read book Design and Processing of Particulate Products written by Jim Litster and published by Cambridge University Press. This book was released on 2016-10-20 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique text providing comprehensive coverage of fundamental particle science, processing and technology. Including quantitative tools, real-world case studies and end-of-chapter problems, it is ideal for students in engineering and applied sciences, as well as for practitioners in a range of industries manufacturing particulate products.

Download or read book Air Pollution Control written by C. David Cooper and published by Waveland Press. This book was released on 2010-08-25 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: A 25-year tradition of excellence is extended in the Fourth Edition of this highly regarded text. In clear, authoritative language, the authors discuss the philosophy and procedures for the design of air pollution control systems. Their objective is twofold: to present detailed information on air pollution and its control, and to provide formal design training for engineering students. New to this edition is a comprehensive chapter on carbon dioxide control, perhaps the most critical emerging issue in the field. Emphasis is on methods to reduce carbon dioxide emissions and the technologies for carbon capture and sequestration. An expanded discussion of control technologies for coal-fired power plants includes details on the capture of NOx and mercury emissions. All chapters have been revised to reflect the most recent information on U.S. air quality trends and standards. Moreover, where available, equations for equipment cost estimation have been updated to the present time. Abundant illustrations clarify the concepts presented, while numerous examples and end-of-chapter problems reinforce the design principles and provide opportunities for students to enhance their problem-solving skills.

Download or read book Unit Operations in Food Processing written by R. L. Earle and published by Elsevier. This book was released on 2013-10-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long awaited second edition of a popular textbook has a simple and direct approach to the diversity and complexity of food processing. It explains the principles of operations and illustrates them by individual processes. The new edition has been enlarged to include sections on freezing, drying, psychrometry, and a completely new section on mechanical refrigeration. All the units have been converted to SI measure. Each chapter contains unworked examples to help the student gain a grasp of the subject, and although primarily intended for the student food technologist or process engineer, this book will also be useful to technical workers in the food industry

Download or read book Gas Cleaning at High Temperatures written by and published by . This book was released on 1986 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors

Download or read book Fluid Mechanics and Fluid Power Contemporary Research written by Arun K. Saha and published by Springer. This book was released on 2016-09-20 with total page 1638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the proceedings of the 42nd National and 5th International Conference on Fluid Mechanics and Fluid Power held at IIT Kanpur in December, 2014.The conference proceedings encapsulate the best deliberations held during the conference. The diversity of participation in the conference, from academia, industry and research laboratories reflects in the articles appearing in the volume. This contributed volume has articles from authors who have participated in the conference on thematic areas such as Fundamental Issues and Perspectives in Fluid Mechanics; Measurement Techniques and Instrumentation; Computational Fluid Dynamics; Instability, Transition and Turbulence; Turbomachinery; Multiphase Flows; Fluid‐Structure Interaction and Flow‐Induced Noise; Microfluidics; Bio‐inspired Fluid Mechanics; Internal Combustion Engines and Gas Turbines; and Specialized Topics. The contents of this volume will prove useful to researchers from industry and academia alike.

Download or read book Foundations of Fuzzy Logic and Soft Computing written by Patricia Melin and published by Springer Science & Business Media. This book was released on 2007-06-05 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises a selection of papers from IFSA 2007 on new methods and theories that contribute to the foundations of fuzzy logic and soft computing. Coverage includes the application of fuzzy logic and soft computing in flexible querying, philosophical and human-scientific aspects of soft computing, search engine and information processing and retrieval, as well as intelligent agents and knowledge ant colony.