Download or read book Design of Fastenings for Use in Concrete Anchor Channels written by British Standards Institute Staff and published by . This book was released on 2009-06-30 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis, Anchorages, Channels (metal sections)
Download or read book Anchorage in Concrete Construction written by Rolf Eligehausen and published by John Wiley & Sons. This book was released on 2013-10-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.
Download or read book Design of Fastenings for Use in Concrete Anchor Channels Supplementary Rules written by British Standards Institute Staff and published by . This book was released on 1918-10-08 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures, Structural systems, Structural design, Loading, Screws (bolts), Plastic analysis, Failure (mechanical), Bolts, Strength of materials, Verification, Concretes, Fasteners
Download or read book Design of Fastenings for Use in Concrete written by Rainer Mallée and published by John Wiley & Sons. This book was released on 2013-04-05 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European pre-standard CEN/TS 1992-4 for the design of fastenings by means of headed studs, anchor channels as well as post-installed mechanical and chemical anchors is ready for use. The background and interpretation of the provisions related to the determination of actions and resistances based on limit state design, durability, fire resistance, fatigue and earthquake actions as required by CEN/TS 1992 are described in detail. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Download or read book Design of anchorages in concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011-01-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.
Download or read book Design of fastenings in concrete draft CEB guide part 1 to 3 fastenings for seismic retrofitting state of the art report on design and application written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1995-08-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fastenings to Concrete and Masonry Structures written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1994 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern fastening techniques are increasingly being used to transfer loads into concrete and masonry structures. This book aims to compile and compare research on the behaviour of fastening systems. It also proposes an approach to the design of fastenings based on empirical and theoretical models.
Download or read book Concrete Structures for Wind Turbines written by Jürgen Grünberg and published by John Wiley & Sons. This book was released on 2013-09-10 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wind energy industry in Germany has an excellent global standing when it comes to the development and construction of wind turbines. Germany currently represents the world's largest market for wind energy. The ongoing development of ever more powerful wind turbines plus additional requirements for the design and construction of their offshore foundation structures exceeds the actual experiences gained so far in the various disciplines concerned. This book gives a comprehensive overview for planning and structural design analysis of reinforced concrete and pre-stressed concrete wind turbine towers for both, onshore and offshore wind turbines. Wind turbines represent structures subjected to highly dynamic loading patterns. Therefore, for the design of loadbearing structures, fatigue effects - and not just maximum loads - are extremely important, in particular in the connections and joints of concrete and hybrid structures. There multi-axial stress conditions occure which so far are not covered by the design codes. The specific actions, the nonlinear behaviour and modeling for the structural analysis are explained. Design and verification with a focus on fatigue are adressed. The chapter Manufacturing includes hybrid structures, segmental construction of pre-stressed concrete towers and offshore wind turbine foundations. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Download or read book Ballastless Tracks written by Stephan Freudenstein and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to increasing traffic flows the extension of transport infrastructure with rail roads and high speed lines is an ongoing process worldwide. Ballastless track systems with concrete slabs are used more and more. Following the first trials in the 1970s and more than four decades of R&D work on ballastless track, the level of development is such that it can be confirmed that ballastless track is suitable for use as an alternative to ballasted track. This book makes a contribution to the state of the art of ballastless track by describing the basics for designing the ballastless track. Important advice is provided regarding the construction of ballastless track on earthworks and in tunnels. There is also a description of the technical history of the development of ballastless track on bridges and the ensuing findings for bridge design. The state of the art of ballastless track for switches, important information on details concerning drainage, transitions, accessibility for road vehicles and experience gleaned from maintenance round off the work. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2019-08-28 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.
Download or read book Design and Construction of Nuclear Power Plants written by Rüdiger Meiswinkel and published by John Wiley & Sons. This book was released on 2013-04-10 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite all the efforts being put into expanding renewable energy sources, large-scale power stations will be essential as part of a reliable energy supply strategy for a longer period. Given that they are low on CO2 emissions, many countries are moving into or expanding nuclear energy to cover their baseload supply. Building structures required for nuclear plants whose protective function means they are classified as safety-related, have to meet particular construction requirements more stringent than those involved in conventional construction. This book gives a comprehensive overview from approval aspects given by nuclear and construction law, with special attention to the interface between plant and construction engineering, to a building structure classification. All life cycle phases are considered, with the primary focus on execution. Accidental actions on structures, the safety concept and design and fastening systems are exposed to a particular treatment. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Download or read book Materials for Architects and Builders written by Arthur R. Lyons and published by Routledge. This book was released on 2010 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bricks and brickwork; Blocks and blockwork; Lime, cement and concrete; Timber and timber products; Ferrous and non-ferrous metals; Bitumen and flat roofing materials; Glass; Ceramic materials; Stone and cast stone; Plastics; Glass-fibre reinforced plastics, cement and gypsum; Plaster and board materials; Insulation materials; Sealants, gaskets and adhesives; Paints, wood stains, varnishes and colour; Energy-saving materials and componets; Recycled and ecological materials; Sustainability
Download or read book Connections between Steel and Concrete written by Rolf Eligehausen and published by ibidem-Verlag / ibidem Press. This book was released on 2012-02-27 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anchorage by fasteners and composite structures of steel and concrete have seen dramatic progress in research, technology and application over the past decades. The understanding of the fundamental principles underlying both disciplines has significantly improved. Concurrently, there has been rapid growth in the development of sophisticated new products and the establishment of international directives and codes to ensure their safe and economical use in a wide range of engineered structures. Although they deal with very similar problems, the two disciplines have developed independently from each other. To optimize the use of composite structures and fastenings to concrete, however, it is necessary to have knowledge of both: the local behavior of the fastening system and the global behavior of the structure. It became apparent that a forum offering the opportunity to expand and to exchange experience in the field of connecting steel and concrete would benefit all involved. Furthermore this forum would aid in the rapid dissemination of new ideas, technologies and solutions as well as explore new areas of research.This book forms the Proceedings of the 2 Symposium on “Connections between Steel and Concrete”. As the 1 Symposium in 2001 it brought together leading experts from all facets of the research, design, construction and anchor manufacturing community from around the world. Their lectures covered the topics:- test methods- behavior and design- dynamic loading: shock, earthquake, fatigue- durability- exceptional applications, strenghtening and structures- related topicsIn total 129 papers are gathered in these 2 volumes.
Download or read book Proceedings fib Symposium in Prague Czech Republic Vol2 written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2011-06-01 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anchors in Concrete design and Behavior written by George A. Senkiw and published by . This book was released on 1991 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Fastenings in Concrete written by Comité Euro-International du Béton and published by Thomas Telford Limited. This book was released on 1996-04-17 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This design guide is based on a safety concept using partial safety factors taken from the CEB/FIB Model Code 1990, and it covers all loading situations and failure models. It is valid for expansion, undercut and headed anchors, and is applicable to both new structures and the repair and strengthening of existing structures.
Download or read book Design of Fastenings in Concrete written by and published by Amer Society of Civil Engineers. This book was released on 1997 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although a large number of fastenings assembles are installed every day, understanding in the engineering community of their behaviour is limited, and there is no generally accepted design method. Design of fastenings in concrete over comes this. This design guide is based on a safety concept using partial safety factors taken from the CEB/FIB Model Code 1990, and it covers all loading situations and failure models. It is valid for expansion, undercut and headed anchors, and is applicable to both new structures and the repair and strengthening of existing structures. This design guide will be complemented by future CEB work to cover fastenings with bonded anchors, channel bars and shear lugs.
