Download or read book Design of a Decision Support System for a Multi item Single Machine Production System written by Cher-Sern Brian Lin and published by . This book was released on 1996 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of a Decision Support System for a Multi item Single Machine Production System written by Cher-Sern Brian Lin and published by . This book was released on 1984 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Manufacturing Decision Support Systems written by H. R. Parsaei and published by Springer Science & Business Media. This book was released on 1997 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a forum for research and applications dealing with the design, the development and the implementation of decision support systems in the manufacturing domain. The book brings together contributions from leading experts in the field. It will appeal to all those concerned with decision support for manufacturing.
Download or read book Real World Decision Support Systems written by Jason Papathanasiou and published by Springer. This book was released on 2016-12-19 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents real-world decision support systems, i.e., systems that have been running for some time and as such have been tested in real environments and complex situations; the cases are from various application domains and highlight the best practices in each stage of the system’s life cycle, from the initial requirements analysis and design phases to the final stages of the project. Each chapter provides decision-makers with recommendations and insights into lessons learned so that failures can be avoided and successes repeated. For this reason unsuccessful cases, which at some point of their life cycle were deemed as failures for one reason or another, are also included. All decision support systems are presented in a constructive, coherent and deductive manner to enhance the learning effect. It complements the many works that focus on theoretical aspects or individual module design and development by offering ‘good’ and ‘bad’ practices when developing and using decision support systems. Combining high-quality research with real-world implementations, it is of interest to researchers and professionals in industry alike.
Download or read book Management Decision Support Systems written by Andrew M. McCosh and published by John Wiley & Sons. This book was released on 1978 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Advanced Manufacturing Systems written by Andrea Matta and published by Springer Science & Business Media. This book was released on 2005-04-25 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a framework and specific methods and tools for the selection and configuration of the capacity of Advanced Manufacturing Systems (AMS). AMS include Flexible Manufacturing Systems, Dedicated Manufacturing Systems, and Reconfigurable Manufacturing Systems. Starting from the characteristic of the competitive environment, the directions given by the company strategy, data regarding the products, and information regarding the different system architectures, the decision support system described here aids the decision maker by means of a formalized methodology that follows the various steps required to define the type and timing of 'capacity' acquisition and to define the detailed configuration of AMS along its life cycle. The decision making framework and tools illustrated in this volume combine decision-making theory, optimization theory, discrete event simulation and queuing networks. It will be of interest to graduate students and researchers involved in manufacturing engineering, industrial engineering and operations research.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fusing Decision Support Systems Into the Fabric of the Context written by Ana Respício and published by IOS Press. This book was released on 2012 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of Information Systems has been shifting from an aeimmersion viewAE, which relies on the immersion of information technology (IT) as part of the business environment, to a aefusion viewAE in which IT is fused within the business environment, forming a unified fabric that integrates work and personal life, as well as personal and public information. In the context of this fusion view, decision support systems should achieve a total alignment with the context and the personal preferences of users. The advantage of such a view is an opportunity of seamless integration between enterprise environments and decision support system components. Thus, researchers and practitioners have to address the challenges of dealing with this shift in viewpoint and its consequences for decision making and decision support systems theories and applications. This book presents the latest innovations and advances in decision support systems with a special focus on the fusion view. These achievements will be of interest to all those involved and interested in decision making practice and research, as well as, more generally, in the fusion view of modern information systems.The book covers a wide range of topical themes including a fusion view of business intelligence and data warehousing, applications of multi-criteria decision analysis, intelligent models and technologies for decision making, knowledge management, decision support approaches and models for emergency management, and medical and other specific domains.
Download or read book TIMS ORSA Bulletin written by Institute of Management Sciences and published by . This book was released on 1994 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
Download or read book Decision Support System DSS for Machine Selection written by Mayra I. Mendez Pinero and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Within any manufacturing environment, the selection of the production or assembly machines is part of the day to day responsibilities of management. This is especially true when there are multiple types of machines that can be used to perform each assembly or manufacturing process. As a result, it is critical to find the optimal way to select machines when there are multiple related assembly machines available. The objective of this research is to develop and present a model that can provide guidance to management when making machine selection decisions of parallel, non-identical, related electronics assembly machines. A model driven Decision Support System (DSS) is used to solve the problem with the emphasis in optimizing available resources, minimizing production disruption, thus minimizing cost. The variables that affect electronics product costs are considered in detail. The first part of the Decision Support System was developed using Microsoft Excel as an interactive tool. The second part was developed through mathematical modeling with AMPL9 mathematical programming language and the solver CPLEX90 as the optimization tools. The mathematical model minimizes total cost of all products using a similar logic as the shortest processing time (SPT) scheduling rule. This model balances machine workload up to an allowed imbalance factor. The model also considers the impact on the product cost when expediting production. Different scenarios were studied during the sensitivity analysis, including varying the amount of assembled products, the quantity of machines at each assembly process, the imbalance factor, and the coefficient of variation (CV) of the assembly processes. The results show that the higher the CV, the total cost of all products assembled increased due to the complexity of balancing machine workload for a large number of products. Also, when the number of machines increased, given a constant number of products, the total cost of all products assembled increased because it is more difficult to keep the machines balanced. Similar results were obtained when a tighter imbalance factor was used.
Download or read book Digital Twin Fundamental Concepts to Applications in Advanced Manufacturing written by Surjya Kanta Pal and published by Springer Nature. This book was released on 2021-08-12 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a guide to the use of Digital Twin in manufacturing. It presents a collection of fundamental ideas about sensor electronics and data acquisition, signal and image processing techniques, seamless data communications, artificial intelligence and machine learning for decision making, and explains their necessity for the practical application of Digital Twin in Industry. Providing case studies relevant to the manufacturing processes, systems, and sub-systems, this book is beneficial for both academics and industry professionals within the field of Industry 4.0 and digital manufacturing.
Download or read book Analysis Design Evaluation of Man Machine Systems written by G. Mancini and published by Elsevier. This book was released on 2014-06-28 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a valuable overview of human-machine interaction in technological systems, with particular emphasis on recent advances in theory, experimental and analytical research, and applications related to man-machine systems. Topics covered include: Automation and Operator - task analysis, decision support, task allocation, management decision support, supervisory control, artificial intelligence, training and teaching, expert knowledge; System Concept and Design - software ergonomics, fault diagnosis, safety, design concepts; Man-machine Interface - interface design, graphics and vision, user adaptive interfaces; Systems Operation - process industry, electric power, aircraft, surface transport, prostheses and manual control. Contains 53 papers and three discussion sessions.
Download or read book Intelligent Production Machines and Systems 2nd I PROMS Virtual International Conference 3 14 July 2006 written by Duc T. Pham and published by Elsevier. This book was released on 2011-07-28 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: I*PROMS 2005 is an online web-based conference. It provides a platform for presenting, discussing, and disseminating research results contributed by scientists and industrial practitioners active in the area of intelligent systems and soft computing techniques (such as fuzzy logic, neural networks, evolutionary algorithms, and knowledge-based systems) and their application in different areas of manufacturing. Comprised of 100 peer-reviewed articles, this important resource provides tools to help enterprises achieve goals critical to the future of manufacturing. I*PROMS is an European Union-funded network that involves 30 partner organizations and more than 130 researchers from universities, research organizations, and corporations. * State-of-the-art research results * Leading European researchers and industrial practitioners * Comprehensive collection of indexed and peer-reviewed articles in book format supported by a user-friendly full-text CD-ROM with search functionality
Download or read book Accounting Information Systems written by Ulric J. Gelinas and published by Cengage AU. This book was released on 2018-09-01 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's accounting professionals are challenged to identify enterprise risks and provide quality assurance for a company's information systems. ACCOUNTING INFORMATION SYSTEMS, 11th International Edition, focuses on three critical accounting information systems in use today: enterprise systems; e-Business systems; and controls for maintaining those systems. Students will easily grasp even the most challenging topics as they explore today's most intriguing AIS topics relative to business processes, information technology, strategic management, security, and internal controls. The 11th International Edition provides students with the tools for organising and managing information to help them succeed and protect the integrity of their employer's information system.
Download or read book Advances in Production Management Systems Artificial Intelligence for Sustainable and Resilient Production Systems written by Alexandre Dolgui and published by Springer Nature. This book was released on 2021-08-31 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2021, held in Nantes, France, in September 2021.* The 378 papers presented were carefully reviewed and selected from 529 submissions. They discuss artificial intelligence techniques, decision aid and new and renewed paradigms for sustainable and resilient production systems at four-wall factory and value chain levels. The papers are organized in the following topical sections: Part I: artificial intelligence based optimization techniques for demand-driven manufacturing; hybrid approaches for production planning and scheduling; intelligent systems for manufacturing planning and control in the industry 4.0; learning and robust decision support systems for agile manufacturing environments; low-code and model-driven engineering for production system; meta-heuristics and optimization techniques for energy-oriented manufacturing systems; metaheuristics for production systems; modern analytics and new AI-based smart techniques for replenishment and production planning under uncertainty; system identification for manufacturing control applications; and the future of lean thinking and practice Part II: digital transformation of SME manufacturers: the crucial role of standard; digital transformations towards supply chain resiliency; engineering of smart-product-service-systems of the future; lean and Six Sigma in services healthcare; new trends and challenges in reconfigurable, flexible or agile production system; production management in food supply chains; and sustainability in production planning and lot-sizing Part III: autonomous robots in delivery logistics; digital transformation approaches in production management; finance-driven supply chain; gastronomic service system design; modern scheduling and applications in industry 4.0; recent advances in sustainable manufacturing; regular session: green production and circularity concepts; regular session: improvement models and methods for green and innovative systems; regular session: supply chain and routing management; regular session: robotics and human aspects; regular session: classification and data management methods; smart supply chain and production in society 5.0 era; and supply chain risk management under coronavirus Part IV: AI for resilience in global supply chain networks in the context of pandemic disruptions; blockchain in the operations and supply chain management; data-based services as key enablers for smart products, manufacturing and assembly; data-driven methods for supply chain optimization; digital twins based on systems engineering and semantic modeling; digital twins in companies first developments and future challenges; human-centered artificial intelligence in smart manufacturing for the operator 4.0; operations management in engineer-to-order manufacturing; product and asset life cycle management for smart and sustainable manufacturing systems; robotics technologies for control, smart manufacturing and logistics; serious games analytics: improving games and learning support; smart and sustainable production and supply chains; smart methods and techniques for sustainable supply chain management; the new digital lean manufacturing paradigm; and the role of emerging technologies in disaster relief operations: lessons from COVID-19 Part V: data-driven platforms and applications in production and logistics: digital twins and AI for sustainability; regular session: new approaches for routing problem solving; regular session: improvement of design and operation of manufacturing systems; regular session: crossdock and transportation issues; regular session: maintenance improvement and lifecycle management; regular session: additive manufacturing and mass customization; regular session: frameworks and conceptual modelling for systems and services efficiency; regular session: optimization of production and transportation systems; regular session: optimization of supply chain agility and reconfigurability; regular session: advanced modelling approaches; regular session: simulation and optimization of systems performances; regular session: AI-based approaches for quality and performance improvement of production systems; and regular session: risk and performance management of supply chains *The conference was held online.