Download or read book Design Modeling and Control of Aerial Robots for Physical Interaction and Manipulation written by Burak Yüksel and published by Logos Verlag Berlin GmbH. This book was released on 2017-06-10 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial robots, meaning robots with flying capabilities, are essentially robotic platforms, which are autonomously controlled via some sophisticated control engineering tools. Similar to aerial vehichles, they can overcome the gravitational forces thanks to their design and/or actuation type. What makes them different from the conventional aerial vehicles, is the level of their autonomy. Reducing the complexity for piloting of such robots/vehicles provide the human operator more freedom and comfort. With their increasing autonomy, they can perform many complicated tasks by their own (such as surveillance, monitoring, or inspection), leaving the human operator the most high-level decisions to be made, if necessary. In this way they can be operated in hazardous and challenging environments, which might posses high risks to the human health. Thanks to their wide range of usage, the ongoing researches on aerial robots is expected to have an increasing impact on the human life. Aerial Physical Interaction (APhI) is a case, in which the aerial robot exerts meaningful forces and torques (wrench) to its environment while preserving its stable flight. In this case, the robot does not try avoiding every obstacle in its environment, but prepare itself for embracing the effect of a physical interaction, furthermore turn this interaction into some meaningful robotic tasks. Aerial manipulation can be considered as a subset of APhI, where the flying robot is designed and controlled in purpose of manipulating its environment. A clear motivation of using aerial robots for physical interaction, is to benefit their great workspace and agility. Moreover, developing robots that can perform not only APhI but also aerial manipulation can bring the great workspace of the flying robots together with the vast dexterity of the manipulating arms. This thesis work is addressing the design, modeling and control problem of these aerial robots for the purpose of physical interaction and manipulation. Using the nonlinear mathematical models of the robots at hand, in this thesis several different control methods (IDA-PBC, Exact Linearization, Differential Flatness Based Control) for APhI and aerial manipulation tasks have been developed and proposed. Furthermore, novel design tools (e.g. new rigid/elastic manipulating arms, hardware, software) to be used together with miniature aerial robots are presented within this thesis, which contributes to the robotics society not only in terms of concrete theory but also practical implementation and experimental robotics.
Download or read book Aerial Manipulation written by Matko Orsag and published by Springer. This book was released on 2017-09-19 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a thorough treatment of the rapidly growing area of aerial manipulation. It details all the design steps required for the modeling and control of unmanned aerial vehicles (UAV) equipped with robotic manipulators. Starting with the physical basics of rigid-body kinematics, the book gives an in-depth presentation of local and global coordinates, together with the representation of orientation and motion in fixed- and moving-coordinate systems. Coverage of the kinematics and dynamics of unmanned aerial vehicles is developed in a succession of popular UAV configurations for multirotor systems. Such an arrangement, supported by frequent examples and end-of-chapter exercises, leads the reader from simple to more complex UAV configurations. Propulsion-system aerodynamics, essential in UAV design, is analyzed through blade-element and momentum theories, analysis which is followed by a description of drag and ground-aerodynamic effects. The central part of the book is dedicated to aerial-manipulator kinematics, dynamics, and control. Based on foundations laid in the opening chapters, this portion of the book is a structured presentation of Newton–Euler dynamic modeling that results in forward and backward equations in both fixed- and moving-coordinate systems. The Lagrange–Euler approach is applied to expand the model further, providing formalisms to model the variable moment of inertia later used to analyze the dynamics of aerial manipulators in contact with the environment. Using knowledge from sensor data, insights are presented into the ways in which linear, robust, and adaptive control techniques can be applied in aerial manipulation so as to tackle the real-world problems faced by scholars and engineers in the design and implementation of aerial robotics systems. The book is completed by path and trajectory planning with vision-based examples for tracking and manipulation.
Download or read book Omnidirectional Tilt Rotor Flying Robots for Aerial Physical Interaction written by Karen Bodie and published by Springer Nature. This book was released on 2024-01-21 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the study of tilt-rotor omnidirectional aerial robots and their application to aerial physical interaction tasks. Omnidirectional aerial robots possess decoupled translational and rotational dynamics, which are important for stable and sustained aerial interaction. The additional ability to dynamically re-orient thrust vectors opens the door to a wide array of possible morphologies and system capabilities. Through modeling, control, prototype design, and experimental evaluation, this book presents a comprehensive methodology and examples for the development of a novel tilt-rotor aerial manipulator. This work serves as a guide for envisioning and constructing innovative systems that will advance the frontier of aerial manipulation.
Download or read book Theory and Applications for Control of Aerial Robots in Physical Interaction Through Tethers written by Marco Tognon and published by Springer Nature. This book was released on 2020-06-26 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies how autonomous aerial robots physically interact with the surrounding environment. Intended to promote the advancement of aerial physical interaction, it analyzes a particular class of aerial robots: tethered aerial vehicles. By examining specific systems, while still considering the challenges of the general problem, it will help readers acquire the knowledge and expertise needed for the subsequent development of more general methods applicable to aerial physical interaction. The formal analysis covers topics ranging from control, state estimation, and motion planning, to experimental validation. Addressing both theoretical and technical aspects, the book is intended for a broad academic and industrial readership, including undergraduate students, researchers and engineers. It can be used as a teaching reference, or as the basis for product development.
Download or read book Aerial Robotic Manipulation written by Anibal Ollero and published by Springer. This book was released on 2019-06-27 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial robotic manipulation integrates concepts and technologies coming from unmanned aerial systems and robotics manipulation. It includes not only kinematic, dynamics, aerodynamics and control but also perception, planning, design aspects, mechatronics and cooperation between several aerial robotics manipulators. All these topics are considered in this book in which the main research and development approaches in aerial robotic manipulation are presented, including the description of relevant systems. In addition of the research aspects, the book also includes the deployment of real systems both indoors and outdoors, which is a relevant characteristic of the book because most results of aerial robotic manipulation have been validated only indoor using motion tracking systems. Moreover, the book presents two relevant applications: structure assembly and inspection and maintenance, which has started to be applied in the industry. The Chapters of the book will present results of two main European Robotics Projects in aerial robotics manipulation: FP7 ARCAS and H2020 AEROARMS. FP7 ARCAS defined the basic concepts on aerial robotic manipulation, including cooperative manipulation. The H2020 AEROARMS on aerial robot with multiple arms and advanced manipulation capabilities for inspection and maintenance has two general objectives: (1) development of advanced aerial robotic manipulation methods and technologies, including manipulation with dual arms and multi-directional thrusters aerial platforms; and (2) application to the inspection and maintenance.
Download or read book Measuring modelling and minimizing perceived motion incongruence for vehicle motion simulation written by Diane Cleij and published by Logos Verlag Berlin GmbH. This book was released on 2020-01-28 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humans always wanted to go faster and higher than their own legs could carry them. This led them to invent numerous types of vehicles to move fast over land, water and air. As training how to handle such vehicles and testing new developments can be dangerous and costly, vehicle motion simulators were invented. Motion-based simulators in particular, combine visual and physical motion cues to provide occupants with a feeling of being in the real vehicle. While visual cues are generally not limited in amplitude, physical cues certainly are, due to the limited simulator motion space. A motion cueing algorithm (MCA) is used to map the vehicle motions onto the simulator motion space. This mapping inherently creates mismatches between the visual and physical motion cues. Due to imperfections in the human perceptual system, not all visual/physical cueing mismatches are perceived. However, if a mismatch is perceived, it can impair the simulation realism and even cause simulator sickness. For MCA design, a good understanding of when mismatches are perceived, and ways to prevent these from occurring, are therefore essential. In this thesis a data-driven approach, using continuous subjective measures of the time-varying Perceived Motion Incongruence (PMI), is adopted. PMI in this case refers to the effect that perceived mismatches between visual and physical motion cues have on the resulting simulator realism. The main goal of this thesis was to develop an MCA-independent off-line prediction method for time-varying PMI during vehicle motion simulation, with the aim of improving motion cueing quality. To this end, a complete roadmap, describing how to measure and model PMI and how to apply such models to predict and minimize PMI in motion simulations is presented. Results from several human-in-the-loop experiments are used to demonstrate the potential of this novel approach.
Download or read book Aerial Robotic Workers written by George Nikolakopoulos and published by Butterworth-Heinemann. This book was released on 2022-11-05 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial Robotic Workers: Design, Modeling, Control, Vision and Their Applications provides an in-depth look at both theory and practical applications surrounding the Aerial Robotic Worker (ARW). Emerging ARWs are fully autonomous flying robots that can assist human operations through their agile performance of aerial inspections and interaction with the surrounding infrastructure. This book addresses all the fundamental components of ARWs, starting with the hardware and software components and then addressing aspects of modeling, control, perception of the environment, and the concept of aerial manipulators, cooperative ARWs, and direct applications. The book includes sample codes and ROS-based tutorials, enabling the direct application of the chapters and real-life examples with platforms already existing in the market. - Addresses the fundamental problems of UAVs with the ability of utilizing aerial tools in the fields of modeling, control, navigation, cooperation, vision and interaction with the environment - Includes open source codes and libraries, providing a complete set of information for readers to start their experimentation with UAVs, and more specifically, ARWs - Provides multiple, real-life examples and codes in MATLAB and ROS
Download or read book Experimental Robotics written by Marcelo H. Ang Jr and published by Springer Nature. This book was released on with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robotics Research written by Nancy M. Amato and published by Springer Nature. This book was released on 2019-11-28 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISRR, the "International Symposium on Robotics Research", is one of robotics pioneering Symposia, which has established over the past two decades some of the field's most fundamental and lasting contributions. This book presents the results of the eighteenth edition of "Robotics Research" ISRR17, offering a collection of a broad range of topics in robotics. This symposium took place in Puerto Varas, Chile from December 11th to December 14th, 2017. The content of the contributions provides a wide coverage of the current state of robotics research, the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new emerging areas of applications. The diversity, novelty, and span of the work unfolding in these areas reveal the field's increased maturity and expanded scope and define the state of the art of robotics and its future direction.
Download or read book Model Based Control of Flying Robots for Robust Interaction Under Wind Influence written by Teodor Tomić and published by Springer Nature. This book was released on 2022-10-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the topic of autonomous flying robots physically interacting with the environment under the influence of wind. It aims to make aerial robots aware of the disturbance, interaction, and faults acting on them. This requires reasoning about the external wrench (force and torque) acting on the robot and distinguishing between wind, interactions, and collisions. The book takes a model-based approach and covers a systematic approach to parameter identification for flying robots. The book aims to provide a wind speed estimate independent of the external wrench, including estimating the wind speed using motor power measurements. Aerodynamics modeling is approached in a data-driven fashion, using ground-truth measurements from a 4D wind tunnel. Finally, the book bridges the gap between trajectory tracking and interaction control, to allow physical interaction under wind influence. Theoretical results are accompanied by extensive simulation and experimental results.
Download or read book Swarm Intelligence written by Marco Dorigo and published by Springer. This book was released on 2018-10-22 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 11th International Conference on Swarm Intelligence, ANTS 2018, held in Rome, Italy, in October 2018. The 24 full papers and 12 short papers presented in this volume were carefully reviewed and selected from 69 submissions. They are devoted to the field of swarm intelligence as a whole, without any bias towards specific research directions.
Download or read book Robot Operating System ROS written by Anis Koubaa and published by Springer. This book was released on 2017-05-25 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume is a continuation of the successful first volume of this Springer book, and as well as addressing broader topics it puts a particular focus on unmanned aerial vehicles (UAVs) with Robot Operating System (ROS). Consisting of three types of chapters: tutorials, cases studies, and research papers, it provides comprehensive additional material on ROS and the aspects of developing robotics systems, algorithms, frameworks, and applications with ROS. ROS is being increasingly integrated in almost all kinds of robots and is becoming the de-facto standard for developing applications and systems for robotics. Although the research community is actively developing applications with ROS and extending its features, amount of literature references is not representative of the huge amount of work being done. The book includes 19 chapters organized into six parts: Part 1 presents the control of UAVs with ROS, while in Part 2, three chapters deal with control of mobile robots. Part 3 provides recent work toward integrating ROS with Internet, cloud and distributed systems. Part 4 offers five case studies of service robots and field experiments. Part 5 presents signal-processing tools for perception and sensing, and lastly, Part 6 introduces advanced simulation frameworks. The diversity of topics in the book makes it a unique and valuable reference resource for ROS users, researchers, learners and developers.
Download or read book Human robot Interaction written by Michael A. Goodrich and published by Now Publishers Inc. This book was released on 2007 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a unified treatment of HRI-related issues, identifies key themes, and discusses challenge problems that are likely to shape the field in the near future. The survey includes research results from a cross section of the universities, government efforts, industry labs, and countries that contribute to HRI.
Download or read book Robot 2023 Sixth Iberian Robotics Conference written by Lino Marques and published by Springer Nature. This book was released on with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mastering Robot dynamics written by Cybellium Ltd and published by Cybellium Ltd. This book was released on with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embark on an Enlightening Journey to "Mastering Robot Dynamics" In a world driven by automation and robotics, mastering the intricacies of robot dynamics is pivotal for creating advanced robotic systems that move with precision and intelligence. "Mastering Robot Dynamics" is your ultimate guide to navigating the complex world of robot motion, control, and manipulation. Whether you're an engineer, researcher, robotics enthusiast, or student, this book equips you with the knowledge and skills needed to excel in designing and controlling sophisticated robotic mechanisms. About the Book: "Mastering Robot Dynamics" takes you on a transformative journey through the intricacies of robot motion and control, from foundational concepts to advanced techniques. From kinematics and dynamics to trajectory planning and real-time control, this book covers it all. Each chapter is meticulously designed to provide both a deep understanding of the principles and practical applications in real-world robotic scenarios. Key Features: · Foundational Understanding: Build a solid foundation by comprehending the core principles of robot dynamics, including kinematics, inertia, and motion equations. · Robot Kinematics: Explore forward and inverse kinematics, understanding how robots move and calculating joint configurations. · Robot Dynamics: Dive into the study of forces, torques, and motion equations, learning how robots interact with their environments. · Trajectory Planning: Master the art of planning robot paths and trajectories, considering constraints and optimizing motion sequences. · Sensors and Perception: Gain insights into sensor integration, perception systems, and how robots interact with the world through feedback. · Motion Control: Learn about different types of control strategies, from PID control to advanced techniques like model predictive control. · Collision Avoidance: Understand methods for detecting and avoiding collisions, ensuring safety and reliability in robot operations. · Robot Manipulation: Explore techniques for manipulating objects, including grasp planning, manipulation tasks, and robotic arms. · Challenges and Trends: Discover challenges in robot dynamics, from sensor noise to complex control algorithms, and explore emerging trends shaping the future of robotics. Who This Book Is For: "Mastering Robot Dynamics" is designed for engineers, researchers, robotics enthusiasts, students, and anyone passionate about robotics. Whether you're aiming to enhance your skills or embark on a journey toward becoming a robotics expert, this book provides the insights and tools to navigate the complexities of designing and controlling robotic systems. © 2023 Cybellium Ltd. All rights reserved. www.cybellium.com
Download or read book Encyclopedia of Robotics written by Marcelo H. Ang and published by Springer. This book was released on 2018-07-13 with total page 4000 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Robotics addresses the existing need for an easily accessible yet authoritative and granular knowledge resource in robotic science and engineering. The encyclopedia is a work that comprehensively explains the scientific, application-based, interactive and socio-ethical parameters of robotics. It is the first work that explains at the concept and fact level the state of the field of robotics and its future directions. The encyclopedia is a complement to Springer’s highly successful Handbook of Robotics that has analyzed the state of robotics through the medium of descriptive essays. Organized in an A-Z format for quick and easy understanding of both the basic and advanced topics across a broad spectrum of areas in a self-contained form. The entries in this Encyclopedia will be a comprehensive description of terms used in robotics science and technology. Each term, when useful, is described concisely with online illustrations and enhanced user interactivity (on SpringerReference.com).
Download or read book Robot Force Control written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fundamental requirements for the success of a robot task is the capability to handle interaction between manipulator and environment. The quantity that describes the state of interaction more effectively is the contact force at the manipulator's end effector. High values of contact force are generally undesirable since they may stress both the manipulator and the manipulated object; hence the need to seek for effective force control strategies. The book provides a theoretical and experimental treatment of robot interaction control. In the framework of model-based operational space control, stiffness control and impedance control are presented as the basic strategies for indirect force control; a key feature is the coverage of six-degree-of-freedom interaction tasks and manipulator kinematic redundancy. Then, direct force control strategies are presented which are obtained from motion control schemes suitably modified by the closure of an outer force regulation feedback loop. Finally, advanced force and position control strategies are presented which include passivity-based, adaptive and output feedback control schemes. Remarkably, all control schemes are experimentally tested on a setup consisting of a seven-joint industrial robot with open control architecture and force/torque sensor. The topic of robot force control is not treated in depth in robotics textbooks, in spite of its crucial importance for practical manipulation tasks. In the few books addressing this topic, the material is often limited to single-degree-of-freedom tasks. On the other hand, several results are available in the robotics literature but no dedicated monograph exists. The book is thus aimed at filling this gap by providing a theoretical and experimental treatment of robot force control.
