Download or read book Design Inspection and Operation of High Pressure Vessels and Piping Systems written by J. R. Sims and published by . This book was released on 1981 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Pressure Vessel Design Manual written by Dennis R. Moss and published by Butterworth-Heinemann. This book was released on 2012-12-31 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. - Covers almost all problems that a working pressure vessel designer can expect to face, with 50+ step-by-step design procedures including a wealth of equations, explanations and data - Internationally recognized, widely referenced and trusted, with 20+ years of use in over 30 countries making it an accepted industry standard guide - Now revised with up-to-date ASME, ASCE and API regulatory code information, and dual unit coverage for increased ease of international use
Download or read book High Pressure Technology written by D. P. Kendall and published by . This book was released on 1986 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Piping written by Charles Becht (IV.) and published by American Society of Mechanical Engineers. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential new volume provides background information, historical perspective, and expert commentary on the ASME B31.1 Code requirements for power piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of power piping. The author, Dr. Becht, is a long-serving member of ASME piping code committees and is the author of the highly successful book, Process Piping: The Complete Guide to ASME B31.3, also published by ASME Press and now in its third edition. Dr. Becht explains the principal intentions of the Code, covering the content of each of the Code's chapters. Book inserts cover special topics such as spring design, design for vibration, welding processes and bonding processes. Appendices in the book include useful information for pressure design and flexibility analysis as well as guidelines for computer flexibility analysis and design of piping systems with expansion joints. From the new designer wanting to know how to size a pipe wall thickness or design a spring to the expert piping engineer wanting to understand some nuance or intent of the Code, everyone whose career involves process piping will find this to be a valuable reference.
Download or read book Surface Production Operations Volume 5 Pressure Vessels Heat Exchangers and Aboveground Storage Tanks written by Maurice Stewart and published by Gulf Professional Publishing. This book was released on 2021-07-22 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering both upstream and downstream oil and gas facilities, Surface Production Operations: Volume 5: Pressure Vessels, Heat Exchangers, and Aboveground Storage Tanks delivers a must-have reference guide to maximize efficiency, increase performance, prevent failures, and reduce costs. Every engineer and equipment manager in oil and gas must have complete knowledge of the systems and equipment involved for each project and facility, especially the checklist to keep up with maintenance and inspection--a topic just as critical as design and performance. Taking the guesswork out of searching through a variety of generalized standards and codes, Surface Production Operations: Volume 5: Pressure Vessels, Heat Exchangers, and Aboveground Storage Tanks furnishes all the critical regulatory information needed for oil and gas specific projects, saving time and money on maintaining the lifecycle of mechanical integrity of the oil and gas facility. Including troubleshooting techniques, calculations with examples, and several significant illustrations, this critical volume within the Surface Production Operations series is crucial on every oil and gas engineer's bookshelf to solve day-to-day problems with common sense solutions. - Provides practical checklists and case studies for selection, installation, and maintenance on pressure vessels, heat transfer equipment, and storage tanks for all types of oil and gas facilities - Explains restoration techniques with detailed inspection and testing procedures, ensuring the equipment is revitalized to maximum life extension - Supplies comprehensive coverage on oil and gas specific American and European standards, codes and recommended practices, saving the engineer time searching for various publications
Download or read book Plant Design and Operations written by Ian Sutton and published by William Andrew. This book was released on 2014-10-06 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Design and Operations provides practical guidance on the design, operation, and maintenance of process facilities. The book is based on years of hands-on experience gathered during the design and operation of a wide range of facilities in many different types of industry including chemicals, refining, offshore oil and gas, and pipelines. The book helps managers, engineers, operators, and maintenance specialists with advice and guidance that can be used right away in working situations. Each chapter provides information and guidance that can be used immediately. For example, the chapter on Energy Control Procedures describes seven levels of positive isolation — ranging from a closed block valve all the way to double block and bleed with line break. The Safety in Design chapter describes topics such as area classification, fire protection, stairways and platforms, fixed ladders, emergency showers, lighting, and alarms. Other areas covered in detail by the book include security, equipment, and transportation. A logical, practical guide to maintenance task organization is provided, from conducting a Job Hazards Analysis to the issue of a work permit, and to the shutdown and isolation of equipment. Common hazards are covered in detail, including flow problems, high pressure, corrosion, power failure, and many more. - Provides information to managers, engineers, operators and maintenance personnel which is immediately applicable to their operations - Supported by useful, real-world examples and experience from a wide range of facilities and industries - Includes guidance on occupational health and safety, industrial hygiene and personal protective equipment
Download or read book Pressure Vessel Design written by G. E. O. Widera and published by . This book was released on 1982 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Union Catalog written by and published by . This book was released on 1981 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes entries for maps and atlases.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1985 with total page 1052 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Mechanical Integrity Systems written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2017-04-11 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, process safety management system compliance audits have revealed that organizations often have significant opportunities for improving their Mechanical Integrity programs. As part of the Center for Chemical Process Safety's Guidelines series, Guidelines for Mechanical Integrity Systems provides practitioners a basic familiarity of mechanical integrity concepts and best practices. The book recommends efficient approaches for establishing a successful MI program.
Download or read book Federal Register written by and published by . This book was released on 1979-05 with total page 2144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 1396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Callaway Plant written by Patsy L. Hendricks and published by . This book was released on 1975 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wolf Creek Generating Station written by Wanda H. Williams and published by . This book was released on 1975 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Operation of Fire Protection Systems written by Arthur E. Cote and published by Jones & Bartlett Learning. This book was released on 2003 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire Science (FESHE)
