Download or read book Seismic Design of Precast Concrete Building Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003-01-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this state-of-art report is to present current practices for use of precast and prestressed concrete in countries in seismic regions, to recommend good practice, and to discuss current developments. The report has been drafted by 30 contributors from nine different countries. This state-of-art report covers: state of the practice in various countries; advantages and disadvantages of incorporating precast reinforced and prestressed concrete in construction; lessons learned from previous earthquakes; construction concepts; design approaches; primary lateral load resisting systems (precast and prestressed concrete frame systems and structural walls including dual systems) diaphragms of precast and prestressed concrete floor units; modelling and analytical methods; gravity load resisting systems; foundations; and miscellaneous elements (shells, folded plates, stairs and architectural cladding panels). Design equations are reported where necessary, but the emphasis is on principles. Ordinary cast-in-place reinforced concrete is not considered in this report. This fib state-of-the-art report is intended to assist designers and constructors to provide safe and economical applications of structural precast concrete and at the same time to allow innovation in design and construction to continue. This Bulletin N° 27 was approved as an fib state-of-art report in autumn 2002 byfib Commission 7, Seismic design.
Download or read book Design Guidelines for Precast Concrete Seismic Structural Systems written by John Francis Stanton and published by . This book was released on 2002 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design of Reinforced and Precast Concrete Buildings written by Robert E. Englekirk and published by John Wiley & Sons. This book was released on 2003-03-10 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Presents the basics of seismic-resistant design of concrete structures. * Provides a major focus on the seismic design of precast bracing systems.
Download or read book NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures written by and published by FEMA. This book was released on 2004 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2003 edition of the NEHRP Recommended Provisions contains several significant changes, including: a reformatting to improve its usability; introduction of a simplified design procedure, an updating of the seismic design maps and how they are presented; a modification in the redundancy factor; the addition of ultimate strength design provisions for foundations; the addition of several new structural systems, including buckling restrained braced frames and steel plate shear walls; structures with damping systems has been moved from an appendix to a new chapter; and inclusion of new or updated material industry reference standards for steel, concrete, masonry, and wood.
Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Minimum Design Loads for Buildings and Other Structures written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2000 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hybrid Simulation written by Victor Saouma and published by CRC Press. This book was released on 2014-04-21 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Simulation: Theory, Implementation and Applications deals with a rapidly evolving technology combining computer simulation (typically finite element) and physical laboratory testing of two complementary substructures. It is a multidisciplinary technology which relies heavily on control theory, computer science, numerical techniques and finds applications in aerospace, civil, and mechanical engineering.
Download or read book Precast Seismic Structural Systems Workshop written by M. J. N. Priestley and published by . This book was released on 1988 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Planning and design handbook on precast building structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1994-05-01 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures Part 2 Commentary 2000 Edition March 2001 written by and published by . This book was released on 2001 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design of Reinforced Concrete Buildings written by Jack Moehle and published by McGraw Hill Professional. This book was released on 2014-10-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of earthquake-resistant concrete building design Written by a renowned seismic engineering expert, this authoritative resource discusses the theory and practice for the design and evaluation of earthquakeresisting reinforced concrete buildings. The book addresses the behavior of reinforced concrete materials, components, and systems subjected to routine and extreme loads, with an emphasis on response to earthquake loading. Design methods, both at a basic level as required by current building codes and at an advanced level needed for special problems such as seismic performance assessment, are described. Data and models useful for analyzing reinforced concrete structures as well as numerous illustrations, tables, and equations are included in this detailed reference. Seismic Design of Reinforced Concrete Buildings covers: Seismic design and performance verification Steel reinforcement Concrete Confined concrete Axially loaded members Moment and axial force Shear in beams, columns, and walls Development and anchorage Beam-column connections Slab-column and slab-wall connections Seismic design overview Special moment frames Special structural walls Gravity framing Diaphragms and collectors Foundations
Download or read book Seismic Design of Reinforced Concrete and Masonry Buildings written by Thomas Paulay and published by Wiley-Interscience. This book was released on 1992-04-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes actual structural design, not analysis, of multistory buildings for seismic resistance. Strong emphasis is placed on specific detailing requirements for construction. Fundamental design principles are presented to create buildings that respond to a wide range of potential seismic forces, which are illustrated by numerous detailed examples. The discussion includes the design of reinforced concrete ductile frames, structural walls, dual systems, reinforced masonry structures, buildings with restricted ductility and foundation walls. In addition to the examples, full design calculations are given for three prototype structures.
Download or read book Planning and design handbook on precast building structures written by FIB - Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2014 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1994 fib Commission 6: Prefabrication edited a successful Planning and Design Handbook that ran to approximately 45,000 copies and was published in Spanish and German. Nearly 20 years later Bulletin 74 brings that first publication up to date. It offers a synthesis of the latest structural design knowledge about precast building structures against the background of 21st century technological innovations in materials, production and construction. With it, we hope to help architects and engineers achieve a full understanding of precast concrete building structures, the possibilities they offer and their specific design philosophy. It was principally written for non-seismic structures. The handbook contains eleven chapters, each dealing with a specific aspect of precast building structures. The first chapter of the handbook highlights best practice opportunities that will enable architects, design engineers and contractors to work together towards finding efficient solutions, which is something unique to precast concrete buildings. The second chapter offers basic design recommendations that take into account the possibilities, restrictions and advantages of precast concrete, along with its detailing, manufacture, transport, erection and serviceability stages. Chapter three describes the precast solutions for the most common types of buildings such as offices, sports stadiums, residential buildings, hotels, industrial warehouses and car parks. Different application possibilities are explored to teach us which types of precast units are commonly used in all those situations. Chapter four covers the basic design principles and systems related to stability. Precast concrete structures should be designed according to a specific stability concept, unlike cast in-situ structures. Chapter five discusses structural connections. Chapters six to nine address the four most commonly used systems or subsystems of precast concrete in buildings, namely, portal and skeletal structures, wall-frame structures, floor and roof structures and architectural concrete facades. In chapter ten the design and detailing of a number of specific construction details in precast elements are discussed, for example, supports, corbels, openings and cutouts in the units, special features related to the detailing of the reinforcement, and so forth. Chapter eleven gives guidelines for the fire design of precast concrete structures. The handbook concludes with a list of references to good literature on precast concrete construction.
Download or read book NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures written by Eugene Zeller and published by DIANE Publishing. This book was released on 2001-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chap. 1 sets forth the general require. for applying the analysis & design provisions contained in Chap. 2 through 12 of the Nat. Earthquake Hazards Reduction Prog. Recommended Provisions for Seismic Reg's. for New Bldgs. & Other Structures. It is similar to what might be incorporated in a code as administrative regulations. Also includes info. on: quality assurance; ground motion; structural design criteria; architectural, mechanical, & electrical components; seismically isolated structures; & design require. for foundation, steel structure, concrete structure, composite steel & concrete structure, masonry structure, wood structure, & non-building structures. Illustrated.
Download or read book Concrete Structures in Earthquake written by Thomas T. C. Hsu and published by Springer. This book was released on 2019-01-21 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers 23 papers by top experts from 11 countries, presented at the 3rd Houston International Forum: Concrete Structures in Earthquake. Designing infrastructures to resist earthquakes has always been the focus and mission of scientists and engineers located in tectonically active regions, especially around the “Pacific Rim of Fire” including China, Japan, and the USA. The pace of research and innovation has accelerated in the past three decades, reflecting the need to mitigate the risk of severe damage to interconnected infrastructures, and to facilitate the incorporation of high-speed computers and the internet. The respective papers focus on the design and analysis of concrete structures subjected to earthquakes, advance the state of knowledge in disaster mitigation, and address the safety of infrastructures in general.
Download or read book Construction Materials and Computer Engineering II written by Wen Song Hu and published by Trans Tech Publications Ltd. This book was released on 2013-07-31 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 2nd International Conference on Sustainable Construction Materials and Computer Engineering (ICSCMCE 2013), June 1-2, 2013, Singapore
