Download or read book Structural Concrete written by Salah El-Metwally and published by CRC Press. This book was released on 2017-10-02 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the application of strut-and-tie models (STM) for the design of structural concrete. It presents state-of-the-art information, from fundamental theories to practical engineering applications, and also provides innovative solutions for many design problems that are not otherwise achievable using the traditional methods.
Download or read book Examples for the Design of Structural Concrete with Strut and tie Models written by American Concrete Institute. Convention and published by . This book was released on 2002 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Prepared by members of ACI Subcommittee 445-1, Strut and Tie Models, for sessions at the Fall Convention in Phoenix, October 27 to November 1, 2002, and sponsored by Joint ACI-ASCE Committee 445, Shear and Torsion and ACI Committee 318-E, Shear and Torsion."
Download or read book Design for Shear in Reinforced Concrete Using Strut and tie Models written by and published by . This book was released on 2006 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete Deep Beams written by F K Kong and published by CRC Press. This book was released on 1991-05-01 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents of this book have been chosen with the following main aims: to review the present coverage of the major design codes and the CIRIA guide, and to explain the fundamental behaviour of deep beams; to provide information on design topics which are inadequately covered by the current codes and design manuals; and to give authoritative revie
Download or read book Building Code Requirements for Structural Concrete ACI 318 08 and Commentary written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2008 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.
Download or read book Topology Optimization written by Martin Philip Bendsoe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topology optimization method solves the basic enginee- ring problem of distributing a limited amount of material in a design space. The first edition of this book has become the standard text on optimal design which is concerned with the optimization of structural topology, shape and material. This edition, has been substantially revised and updated to reflect progress made in modelling and computational procedures. It also encompasses a comprehensive and unified description of the state-of-the-art of the so-called material distribution method, based on the use of mathematical programming and finite elements. Applications treated include not only structures but also materials and MEMS.
Download or read book Finite Element Design of Concrete Structures written by Guenter Axel Rombach and published by Thomas Telford. This book was released on 2004 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Finite Element Design of Concrete Structures: practical problems and their solutions the author addresses this blind belief in computer results by offering a useful critique that important details are overlooked due to the flood of information from the output of computer calculations. Indeed, errors in the numerical model may lead in extreme cases to structural failures as the collapse of the so-called Sleipner platform has demonstrated.
Download or read book Design Examples for Strut and tie Models written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 61 is a continuation of fib Bulletin 16 (2002). Again the bulletin’s main objective is to demonstrate the application of the FIP Recommendations “Practical Design of Structural Concrete”, and especially to illustrate the use of strut-and-tie models to design discontinuity regions (D-regions) in concrete structures. Bulletin 61 presents 14 examples, most of which are existing structures built in recent years. Although some of the presented structures can be considered to be quite important and, in some instances, complex, the chosen examples are not intended to be exceptional. The main aim is to look at specific design aspects, by selecting D-regions of the presented structures that are designed and detailed according to the proposed design principles and specifications for the use of strut-and-tie models. Two papers at the end of the bulletin deal with the role of concrete tension fields in modelling with strut-and-tie models, and summarize the experiences gained by the Working Group in applying strut-and-tie models to the examples in the bulletin. It is hoped that fib Bulletin 61 will be of interest to engineers involved in the design of concrete structures, supporting the use of more consistent design and detailing tools such as strut-and-tie models.
Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Building Code Requirements for Structural Concrete ACI 318 05 and Commentary ACI 318R 05 written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Concrete Structures with Stress Fields written by Aurello Muttoni and published by Birkhäuser. This book was released on 2012-12-06 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: 17 2 STRESS FIELDS FOR SIMPLE STRUCTURES 2. 1 INTRODUCTION In this chapter the behavior and strength of simple structures made of rein forced or prestressed concrete is investigated with the aid of stress fields. In particular, the webs and flanges of beams, simple walls, brackets, bracing beams and joints of frames are investigated. By this means, the majority of design cases are already covered. In reality, all structural components are three-dimensional. Here, however, components are considered either directly as two-dimensional plate elements (i. e. the plane stress condition with no variation of stress over the thickness of the element) or they are subdivided into several plates. Since two-dimensional structural elements are statically redundant, it is pOSSible for a particular loading to be in equilibrium with many (theoretically an infinite number of) stress states. If the lower bound method of the theory of plasticity is employed, then an admissible stress field or any combination of such stress fields may be selected. In chapter 4 it is shown that this method is suitable for the design of reinforced concrete structures, and the consequence of the choice of the final structural system on the structural behavior is dealt with in detail. The first cases of the use of this method date back to Ritter [6] and Morsch [4], who already at the beginning of the century investigated the resultants of the internal stresses by means of truss models.
Download or read book Advances in Civil Engineering written by Rao Martand Singh and published by Springer Nature. This book was released on 2020-09-21 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select peer reviewed papers presented at the international conference - Advanced Research and Innovations in Civil Engineering (ARICE 2019). It brings together a wide variety of innovative topics and current developments in various branches of civil engineering. Some of the major topics covered include structural engineering, water resources engineering, transportation engineering, geotechnical engineering, environmental engineering, and remote sensing. The book also looks at emerging topics such as green building technologies, zero-energy buildings, smart materials, and intelligent transportation systems. Given its contents, the book will prove useful to students, researchers, and professionals working in the field of civil engineering.
Download or read book Reinforced Concrete written by James Grierson MacGregor and published by Prentice Hall. This book was released on 1997 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the 1995 edition of the American Concrete Institute Building Code, this text explains the theory and practice of reinforced concrete design in a systematic and clear fashion, with an abundance of step-by-step worked examples, illustrations, and photographs. The focus is on preparing students to make the many judgment decisions required in reinforced concrete design, and reflects the author's experience as both a teacher of reinforced concrete design and as a member of various code committees. This edition provides new, revised and expanded coverage of the following topics: core testing and durability; shrinkage and creep; bases the maximum steel ratio and the value of the factor on Appendix B of ACI318-95; composite concrete beams; strut-and-tie models; dapped ends and T-beam flanges. It also expands the discussion of STMs and adds new examples in SI units.
Download or read book Concrete Beams with Openings written by M. A. Mansur and published by CRC Press. This book was released on 1999-01-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles state-of-the-art information on the behavior, analysis, and design of concrete beams containing transverse openings. Discussions include the need, effects, and classification of openings as well as the general requirements for fulfilling design pure bending, combined bending, and shear - illustrated with numerical examples torsion alone or in combination with bending and shear large rectangular openings as well as opening size and location on beam behavior methods for analyzing ultimate strength and serviceability requirements effects of torsion in beams large openings in continuous beams and their effects on possible redistribution of internal forces as well as guidelines and procedures for the design of such beams effect of prestressing on the serviceability and strength of beams with web openings design against cracking at openings and ultimate loads Concrete Beams with Openings serves as an invaluable source of information for designers and practicing engineers, especially useful since little or no provision or guidelines are currently available in most building codes.
Download or read book Strut and Tie Models written by Naveed Anwar and published by Butterworth-Heinemann. This book was released on 2017-09-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strut and Tie Models: Analysis and Design presents a systematic and consistent approach to the application of the STM to almost all types of members using the arbitrary distinction between a D and a B region. Strut and tie modeling provides design engineers with a flexible and intuitive option for designing structures or portions that are heavily influenced by shear forces. The book also demonstrates how strut and tie modeling and finite element methods are not mutually exclusive but rather complementary and supportive. The book’s four part treatment starts with an overview of structural analysis and strut and tie models (STM). This is quickly followed by relevant topics such as: loads and load paths through members plus case studies, and formalization of strut and tie models. Applications of STM are then explained in detail along with extracting STM through FEM. In addition, the book will include solved examples and mobile apps. Includes moment curvature analysis, interaction diagrams and reinforcement design and stress analysis for structural cross sections Includes modeling tools and computational methods for cross-sections for stress distribution and stress calculations Features many illustrations, schematics, diagrams and line drawings Includes author-developed computer-based apps to be used in conjunction with the practical applications presented in the book Covers both the Eurocodes and American Concrete Institute codes, which are two major, widely-used building design code documents in the world according to researchgate.net
Download or read book Concrete Shear in Earthquake written by T.C.C. Hsu and published by CRC Press. This book was released on 1992-01-15 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of papers presented at the International Workshop on Concrete Shear in Earthquake, held at the University of Houston, Texas, USA, 13-16 January 1991.
Download or read book Performance Based Optimization of Structures written by Qing Quan Liang and published by CRC Press. This book was released on 2005-02-25 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance-Based Optimization of Structures introduces a method to bridge the gap between structural optimization theory and its practical application to structural engineering. The Performance-Based Optimization (PBO) method combines modern structural optimisation theory with performance based design concepts to produce a powerful technique for use in structural design. This book provides the latest PBO techniques for achieving optimal topologies and shapes of continuum structures with stress, displacement and mean compliance constraints. The emphasis is strongly placed on practical applications of automated PBO techniques to the strut-and-tie modelling of structural concrete, which includes reinforced and prestressed concrete structures. Basic concepts underlying the development of strut-and-lie models, design optimization procedure, and detailing of structural concrete are described in detail. Alternative approaches to topology optimization are also introduced. The book contains numerous practical design examples illustrating the nature of the load transfer mechanism of structures.
