Download or read book Product Design for Manufacture and Assembly Third Edition written by Geoffrey Boothroyd and published by CRC Press. This book was released on 2010-12-08 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed as a groundbreaking and important textbook upon its initial publication, the latest iteration of Product Design for Manufacture and Assembly does not rest on those laurels. In addition to the expected updating of data in all chapters, this third edition has been revised to provide a top-notch textbook for university-level courses in product design and manufacturing design. The authors have added a comprehensive set of problems and student assignments to each chapter, making the new edition substantially more useful. See what’s in the Third Edition: Updated case studies on the application of DFMA techniques Extended versions of the classification schemes of the features of products that influence the difficulty of handling and insertion for manual, high-speed automatic, and robot assembly Discussions of changes in the industry such as increased emphasis on the use of surface mount devices New data on basic manufacturing processes Coverage of powder injection molding Recognized as international experts on the re-engineering of electro-mechanical products, the methods and guidelines developed by Boothroyd, Dewhurst, and Knight have been documented to provide significant savings in the product development process. Often attributed with creating a revolution in product design, the authors have been working in product design manufacture and assembly for more than 25 years. Based on theory yet highly practical, their text defines the factors that influence the ease of assembly and manufacture of products for a wide range of the basic processes used in industry. It demonstrates how to develop competitive products that are simpler in configuration and easier to manufacture with reduced overall costs.
Download or read book Design for Manufacturing written by Corrado Poli and published by Elsevier. This book was released on 2001-11-29 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Manufacturing assists anyone not familiar with various manufacturing processes in better visualizing and understanding the relationship between part design and the ease or difficulty of producing the part. Decisions made during the early conceptual stages of design have a great effect on subsequent stages. In fact, quite often more than 70% of the manufacturing cost of a product is determined at this conceptual stage, yet manufacturing is not involved. Through this book, designers will gain insight that will allow them to assess the impact of their proposed design on manufacturing difficulty. The vast majority of components found in commercial batch-manufactured products, such as appliances, computers and office automation equipment are either injection molded, stamped, die cast, or (occasionally) forged. This book emphasizes these particular, most commonly implemented processes. In addition to chapters on these processes, the book touches upon material process selection, general guidelines for determining whether several components should be combined into a single component or not, communications, the physical and mechanical properties of materials, tolerances, and inspection and quality control. In developing the DFM methods presented in this book, he has worked with over 30 firms specializing in injection molding, die-casting, forging and stamping. - Implements a philosophy which allows for easier and more economic production of designs - Educates designers about manufacturing - Emphasizes the four major manufacturing processes
Download or read book Design for Manufacturability 1995 written by J. Richard Behun and published by . This book was released on 1995 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Product Development and Design for Manufacturing written by John Priest and published by CRC Press. This book was released on 2012-04-16 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Outlines best practices and demonstrates how to desgin in quality for successful development of hardware and software products. Offers systematic applications failored to particular market environments. Discusses Internet issues, electronic commerce, and supply chain."
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book The Changing Nature of Work written by Ann Howard and published by Pfeiffer. This book was released on 1995-07-21 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not since the Industrial Revolution has the world experienced such a vast transformation in the nature of work as is now in progress. The winds of change are buffeting the terms and conditions of work, its content, and its context. The rapidity and discontinuity of these changes produce discomfort and anxiety among employees and unprecedented challenges to the leadership of organizations. What will the future hold as information technology, global competition, and the quest for efficiency and flexibility rapidly displace jobs and workers? and how can human resource scientists and professionals anticipate what lies ahead and generate better understanding of emerging work behavior?The Changing Nature of Work envisions the future nature of work, its effect on workers and organizations, and the expanded knowledge that will be needed to optimize its returns. The book examines critical post-industrial transformations in work, workers, and the experience of working and assesses the implications of those changes. It investigates what is driving change at work, what is constraining it, and where work is headed as governments, societies, and work organizations respond to its revolutionary thrust.Demonstrating that most knowledge of work life is rooted in jobs, organizations, and workers of the past, Ann Howard and her contributors call for rethinking the psychology of work. In fourteen original chapters, leading authorities within and outside industrial and organizational psychology--including job design, personnel selection, training, teamwork, organizational commitment, careers, leadership, performance appraisal, political and labor economics, sociology, and information technology--question, test, revise, and expand the current body of knowledge about work behavior.The authors explore the human side of the changing nature of work in both service and manufacturing settings and provide new directions for the work and workers of tomorrow. They probe the challenges
Download or read book Integrated Design and Manufacturing in Mechanical Engineering written by Patrick Chedmail and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the selected papers of the first I.D.M.M.E. conference on 'Integrated Design and Manufacturing in Mechanical Engineering', held in Nantes from 15-17 April 1996. Its objective was to discuss the questions related to the definition of the optimal design and manufacturing processes and to their integration through coherent methodologies in adapted environments. The initiative of the Conference and the organization thereof, is mainly due to the efforts of the french PRIMECA group (Pool of Computer Resources for Mechanics) started eight years ago. We were able to attract the internationru community with the support of the International Institution for Production Engineering Research (C.I.R.P.). The conference brought together two hundred and fifty specialists from around the world. About ninety papers and twenty posters were presented covering three main topics : optimization and evaluation of the product design process, optimization and evaluation of the manufacturing systems and methodological aspects.
Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.
Download or read book Product Design and Development written by Karl T. Ulrich and published by Irwin/McGraw-Hill. This book was released on 2004 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents a set of product development techniques aimed at bringing together the marketing, design, and manufacturing functions of the enterprise. The integrative methods facilitate problem-solving and decision-making.
Download or read book Advances in Integrated Design and Manufacturing in Mechanical Engineering written by Alan Bramley and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers related to the fifth edition of book further to the International Conference on Integrated Design and Manufacturing in Mechanical Engineering. This Conference has been organized within the framework of the activities of the AIP-PRIMECA network whose main scientific field is Integrated Design applied to both Mechanical Engineering and Productics. This network isorganized along the lines of a joint project: the evolution, in the field of training of Integrated Design in Mechanics and Productics, in quite close connection with the ever changing industrial needs over the past 20 years. It is in charge of promoting both exchanges of experience and know-how capitalisation. It has a paramount mission to fulfil, be it in the field of initial and continuous education, technological transfer and knowledge dissemination through strong links with research labs. For the second time, in fact, the IDMME Conference has been held abroad and, after Canada in 2000, the United Kingdom, more particularly Bath University, has been retained under the responsibility of Professor Alan Bramley, the Chairman of the Scientific Committee of the conference. The Scientific Committee members have selected all the lectures from com mplete papers, which is the guarantee for the Conference of quite an outstanding scientific level. After that, a new selection hasbeen carried out to retain the best publications, which establish in a book, a state-of-the-art analysis as regards Integrated Design and Manufacturing in the discipline of Mechanical Engineering.
Download or read book Manufacturing Science and Engineering 1995 Material removal and surface modification issues in machining processes Mechatronics for manufacturing Computer aided tooling written by E. Kannatey-Asibu and published by . This book was released on 1995 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Machine Design written by Andrew D. Dimarogonas and published by John Wiley & Sons. This book was released on 2000-12-18 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer aided design (CAD) emerged in the 1960s out of the growing acceptance of the use of the computer as a design tool for complex systems. As computers have become faster and less expensive while handling an increasing amount of information, their use in machine design has spread from large industrial needs to the small designer.
Download or read book Handbook of Manufacturing and Supply Systems Design written by Bin Wu and published by CRC Press. This book was released on 2003-09-02 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Systems Management (MSM) is a functional domain that involves all of the activities for regulating and optimizing a manufacturing system as it progresses through its life cycle. These include the tasks of strategic analysis, design, implementation, operations and monitoring. Handbook of Manufacturing and Supply Systems Design: From Strategy Formulation to System Operation proposes a conceptual MSM framework based on some key principles of systems theory, which draws extensively on the relevant methodologies and techniques set out in the literature and on data gathered from industrial practice. This framework specifies the key functional areas of MSM, outlines the contents and relationships between them, and then logically integrates them in a closed-loop to allow the development of a set of consistent parameters and procedures. It enables an understanding of the problem domain, and provides guidance for the development of a set of consistent parameters and procedures. The handbook describes how a prototype of this framework has been used in the structuring and implementation of a computer-aided manufacturing system design environment. The application of certain key aspects of this framework within a number of industrial companies is also described. This sets the scene for a new generation of on-line manufacturing software systems, and should provide the knowledge to manage system design or re-design projects more effectively. Also included is a self-contained workbook, which provides a step-by-step guide through the complete cycle of manufacturing systems management, manufacturing systems design and manufacturing systems operation. Senior undergraduates and graduates students, as well as manufacturing engineers, should find this an up-to-date and thorough text.
Download or read book DeGarmo s Materials and Processes in Manufacturing written by J. T. Black and published by John Wiley & Sons. This book was released on 2011-08-30 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its eleventh edition, DeGarmo's Materials and Processes in Manufacturing has been a market-leading text on manufacturing and manufacturing processes courses for more than fifty years. Authors J T. Black and Ron Kohser have continued this book's long and distinguished tradition of exceedingly clear presentation and highly practical approach to materials and processes, presenting mathematical models and analytical equations only when they enhance the basic understanding of the material. Completely revised and updated to reflect all current practices, standards, and materials, the eleventh edition has new coverage of additive manufacturing, lean engineering, and processes related to ceramics, polymers, and plastics.
Download or read book Design for X written by Charles M. Eastman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the expertise of worldwide authorities in the field, Design for X is the first comprehensive book to offer systematic and structured coverage of contemporary and concurrent product development techniques. It features over fifteen techniques, including: design for manufacture and assembly; design for distribution; design for quality; and design for the environment. Alternative approaches and common elements are discussed and critical issues such as integration and tradeoff are explored.
Download or read book Lean Manufacturing Systems and Cell Design written by J. Temple Black and published by Society of Manufacturing Engineers. This book was released on 2003 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Readers will learn how to integrate quality and reliability control, machine tool maintenance, production and inventory control, and suppliers into the linked-cell system for one-piece parts movement within cells and small-lot movement between cells.
Download or read book Manufacturing written by Beno Benhabib and published by CRC Press. This book was released on 2003-07-03 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept development to final production, this comprehensive text thoroughly examines the design, prototyping, and fabrication of engineering products and emphasizes modern developments in system modeling, analysis, and automatic control. This reference details various management strategies, design methodologies, traditional production techniques, and assembly applications for clear illustration of manufacturing engineering technology in the modern age. Considers a variety of methods for product design including axiomatic design, design for X, group technology, and the Taguchi method, as well as modern production techniques including laser-beam machining, microlithography.