Download or read book High Temperature Electronics written by F. Patrick McCluskey and published by CRC Press. This book was released on 1996-12-13 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of electronics that can operate at high temperatures has been identified as a critical technology for the next century. Increasingly, engineers will be called upon to design avionics, automotive, and geophysical electronic systems requiring components and packaging reliable to 200 °C and beyond. Until now, however, they have had no single resource on high temperature electronics to assist them. Such a resource is critically needed, since the design and manufacture of electronic components have now made it possible to design electronic systems that will operate reliably above the traditional temperature limit of 125 °C. However, successful system development efforts hinge on a firm understanding of the fundamentals of semiconductor physics and device processing, materials selection, package design, and thermal management, together with a knowledge of the intended application environments. High Temperature Electronics brings together this essential information and presents it for the first time in a unified way. Packaging and device engineers and technologists will find this book required reading for its coverage of the techniques and tradeoffs involved in materials selection, design, and thermal management and for its presentation of best design practices using actual fielded systems as examples. In addition, professors and students will find this book suitable for graduate-level courses because of its detailed level of explanation and its coverage of fundamental scientific concepts. Experts from the field of high temperature electronics have contributed to nine chapters covering topics ranging from semiconductor device selection to testing and final assembly.
Download or read book Design Aids of Offshore Structures Under Special Environmental Loads including Fire Resistance written by Srinivasan Chandrasekaran and published by Springer. This book was released on 2018-01-12 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed analysis methods and design guidelines for fire resistance, a vital consideration for offshore processing and production platforms. Recent advancements in the selection of various geometric structural forms for deep-water oil exploration and production require a detailed understanding of the design of offshore structures under special loads. Focusing on a relatively new aspect of offshore engineering, the book offers essential teaching material, illustrating and explaining the concepts discussed through many tutorials. It creates a basis for designing new courses for students of ocean engineering and naval architecture, civil engineering, and applied mechanics at both undergraduate and graduate levels. As such, its content can be used for self-study or as a text in structured courses and professional development programs.
Download or read book Fatigue at Elevated Temperatures written by and published by ASTM International. This book was released on 1973 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Deformation and Fracture of Materials written by Jun-Shan Zhang and published by Elsevier. This book was released on 2010-09-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy, petrochemical, aerospace and other industries all require materials able to withstand high temperatures. High temperature strength is defined as the resistance of a material to high temperature deformation and fracture. This important book provides a valuable reference to the main theories of high temperature deformation and fracture and the ways they can be used to predict failure and service life. - Analyses creep behaviour of materials, the evolution of dislocation substructures during creep, dislocation motion at elevated temperatures and importantly, recovery-creep theories of pure metals - Examines high temperature fracture, including nucleation of creep cavity, diffusional growth and constrained growth of creep cavities - A valuable reference to the main theories of high temperature deformation and fracture and the ways they can be used to predict failure and service life
Download or read book GaAs MMIC Reliability High Temperature Behavior written by Aris Christou and published by RIAC. This book was released on 2006 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Products Design Handbook written by Edward Miller and published by CRC Press. This book was released on 2020-11-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on complexities, peculiarities, and limitations of various molding processes, and the comparative advantages and disadvantages of the possible plastic products manufacturing techniques, to permit an ideal match of good design and processing.
Download or read book Environmental Testing Techniques for Electronics and Materials written by Geoffrey W. A. Dummer and published by Elsevier. This book was released on 2013-10-22 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Testing Techniques for Electronics and Materials reviews environmental testing techniques for evaluating the performance of electronic equipment, components, and materials. Environmental test planning, test methods, and instrumentation are described, along with the general environmental conditions under which equipment must operate. This book is comprised of 15 chapters and begins by explaining why environmental testing is necessary and describing the environment in which electronics must operate. The next chapter considers how an environmental test plan is designed; the methods for the environmental testing of components and materials; instrumentation and control of test chambers; shock and vibration test instrumentation; and requirements for specification writing. The reader is then introduced to factors that might affect the reliability of equipment, including high humidity environment; galvanic corrosion problems; high- and low-temperature environments; mechanical and associated hazards; transport hazards; and long-term storage. Problems posed by high altitude and space environments, nuclear radiation, and acoustic noise are also discussed. The final chapter is devoted to environmental protection techniques and looks at the effects of climatic environments on radio interference as well as the effects of the environment on the human operator. This monograph will be of value to materials scientists and electronics engineers as well as those engaged in the design, development, and production of professional and military equipment.
Download or read book Effects of High Temperature Exposures on the Fatigue Life of Superalloy Udimet Registered Trademark 720 written by Timothy P. Gabb and published by . This book was released on 2002 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Fatigue written by R.P. Skelton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: About 35 years ago, thermal fatigue was identified as an important phenomenon which limited the lifetime of high temperature plant. In the intervening years many investigations have been carried out, primarily to give guidance on likely endurance (especially in the presence of time dependent deformation) but latterly, with the introduction of sophisticated testing machines, to provide knowledge of the underlying mechanisms of failure. A previous edited book (Fatigue at High Temperature, Elsevier Applied Science Publishers, 1983) summarised the state-of-the-art of high temperature fatigue testing and examined the factors influencing life, such as stress state, environment and microstructural effects. It also considered, in some detail, cyclic crack growth as a more rigorous approach to life limitation. The aim of the present volume (which in style and format follows exactly the same lines as its predecessor) is once again to pursue the desire to translate detailed laboratory knowledge into engineering design and assessment. There is, for example, a need to consider the limitations of the laboratory specimen and its relationship with engineering features. Many design procedures still rely on a simple endurance approach based on failure of a smooth specimen, and this is taken to indicate crack initiation in the component. In this volume, therefore, crack propagation is covered only incidentally, emphasis being placed instead on basic cyclic stress strain properties, non-isothermal behaviour, metallography, failure criteria and the need for agreed testing procedures.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Allowable Stresses for Elevated Temperature Structures written by C. G. Swanson and published by . This book was released on 1962 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time-dependent methods of analysis for colums, stiffened and unstiffened plates, and torsional members have been developed and programmed for the IBM 709 digital computer. The important material behaviors, i.e., soaking at temperatures, elastic and plastic strain, creep and residual stress and strain under varying temperature inputs, can be accounted for in the digital solutions. Two illustrative examples for obtaining allowable stresses are shown; the first for a stable structure in combined tensile and bending and the second for a column subjected to time-dependent displacements due to creep. These two examples are sufficiently typical to demonstrate the applicability of the procedures developed in this report or other procedures which give the stress-strain-deflection time history of a structure.
Download or read book Proceedings of Conference Environmental Degradation of Engineering Materials October 10 12 1977 College of Engineering Virginia Tech Blacksburg Virginia written by M. R. Louthan and published by . This book was released on 1977 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Aluminides and Intermetallics written by S.H. Whang and published by Elsevier. This book was released on 2013-10-22 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of proceedings is concerned with an increasingly important area, that of intermetallics and high temperature aluminides, which has recently been attracting a great deal of attention. Nearly 150 papers presented at the meeting held in San Diego in September 1991 are reproduced here. They cover a wide range of related topics such as the bonding characteristic and alloying behaviour of TiA1 intermetallic compounds and the cleavage fracture of ordered intermetallic alloys. All the papers have been reviewed according to the standards set by Materials Science and Engineering. This book will be of interest to metallurgists and materials scientists working with composites who are interested in the latest developments in this fast–moving field.
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Hoses for High Performance Environments written by and published by iSmithers Rapra Publishing. This book was released on 1997 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Natural Ventilation for Infection Control in Health care Settings written by Y. Chartier and published by World Health Organization. This book was released on 2009 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guideline defines ventilation and then natural ventilation. It explores the design requirements for natural ventilation in the context of infection control, describing the basic principles of design, construction, operation and maintenance for an effective natural ventilation system to control infection in health-care settings.
Download or read book Regulatory Guide written by U.S. Nuclear Regulatory Commission. Office of Standards Development and published by . This book was released on 1978 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: 1. Power reactors.--2. Research and test reactors.--3. Fuels and materials facilities.--4. Environmental and siting.--5. Materials and plant protection.--6. Products.--7. Transportation.--8. Occupational health.--9. Antitrust reviews.--10. General.
