Download or read book Design Based Concept Learning in Science and Technology Education written by Ineke Henze and published by BRILL. This book was released on 2021-02-22 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design-Based Concept Learning in Science and Technology Education brings together contributions from researchers that have investigated what conditions need to be fulfilled to make design-based education work.
Download or read book A Framework for K 12 Science Education written by National Research Council and published by National Academies Press. This book was released on 2012-02-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S. competitiveness and to better prepare the workforce, A Framework for K-12 Science Education proposes a new approach to K-12 science education that will capture students' interest and provide them with the necessary foundational knowledge in the field. A Framework for K-12 Science Education outlines a broad set of expectations for students in science and engineering in grades K-12. These expectations will inform the development of new standards for K-12 science education and, subsequently, revisions to curriculum, instruction, assessment, and professional development for educators. This book identifies three dimensions that convey the core ideas and practices around which science and engineering education in these grades should be built. These three dimensions are: crosscutting concepts that unify the study of science through their common application across science and engineering; scientific and engineering practices; and disciplinary core ideas in the physical sciences, life sciences, and earth and space sciences and for engineering, technology, and the applications of science. The overarching goal is for all high school graduates to have sufficient knowledge of science and engineering to engage in public discussions on science-related issues, be careful consumers of scientific and technical information, and enter the careers of their choice. A Framework for K-12 Science Education is the first step in a process that can inform state-level decisions and achieve a research-grounded basis for improving science instruction and learning across the country. The book will guide standards developers, teachers, curriculum designers, assessment developers, state and district science administrators, and educators who teach science in informal environments.
Download or read book Locating Technology Education in STEM Teaching and Learning written by Wendy Fox-Turnbull and published by Springer Nature. This book was released on with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Bloomsbury Handbook of Technology Education written by David Gill and published by Bloomsbury Publishing. This book was released on 2023-04-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bloomsbury Handbook of Technology Education draws together international perspectives on contemporary praxis in technology education from philosophy to empirical research. Through carefully commissioned chapters, leading authors explore the fundamentals of technology education, curriculum and pedagogy. Chapters discuss technology education as it can be experienced by children and young people, inside and outside of the classroom, across the world, as well as the importance of technology and the history and philosophical origins of technology education. Carefully curated, this is an innovative and exciting volume for students, teachers, teacher educators, researchers, lecturers and professors in technology education.
Download or read book Applications of Research in Technology Education written by P. John Williams and published by Springer Nature. This book was released on 2022-02-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together significant international research in technology education through a focus on contemporary Ph.D. theses. It highlights the conceptual underpinnings and methodology of each research project and elaborates on how the findings are relevant for practitioners. This book addresses the common disjunction between research conducted and an awareness of that research by practitioners. It examines the extent to which the research aligns with different justifications for teaching technology in schools in economic, utilitarian, democratic, cultural, and other such contexts.
Download or read book Standards Based Technology and Engineering Education written by Scott R. Bartholomew and published by Springer Nature. This book was released on 2023-12-03 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together authors from around the world to discuss the Standards for Technological and Engineering Literacy: The Role of Technology and Engineering in STEM Education (STEL) released in July 2020 by the International Technology and Engineering Educators Association (ITEEA). The various chapters examine and elaborate on how educators must understand the structure of the standards used and their alignment with educational programs at specific levels and contexts, both in the context of the USA, and internationally. It also showcases case studies analyzing the use of standards in their various contexts from a number of countries which have either adapted STEL, or which have national Standards in Technology Education. The STEL represents a major update to the content standards that has guided the field of technology education (and, later, technology and engineering education) in the USA since 2000. In contrast to previous standards, STEL presents a substantial reduction in the number of standards and associated benchmarks, and the benchmarks have been operationalized to identify the key knowledge, skills, and dispositions associated with each standard. It also emphasizes a focus on core standards that should allow for deeper levels of understanding and engagement on the part of students, who in comprehensive educational programs will continue to revisit these core standards in increasingly sophisticated ways as they progress from Pre-K through Grade 12.
Download or read book Design and Technology in your School written by HildaRuth Beaumont and published by Taylor & Francis. This book was released on 2024-03-29 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the practicalities of establishing Design & Technology as a worthwhile subject in the secondary school. Written by two leading experts in the field, it explores the way in which Design & Technology may be taught so that it makes a unique contribution to the learning of young people. It provides Design & Technology departments with practical information and guidance around key issues such as planning and assessing the subject, justifications for teaching it as well as ways in which schools can manage and sustain teaching Design & Technology long term. In dealing with the breadth and depth of Design & Technology this book: Provides rationales for Design & Technology which go far beyond the usual limited economic utility argument. Considers the underpinning philosophies of technology and design and the essential place of values, clarifying the substantive and disciplinary knowledge. Discusses five important issues: decolonising the subject, gender, disruption, global warming, pollution and waste. Describes how a Design & Technology curriculum may be planned, taking into account content, resources and learning activities to achieve breadth, balance, and progression. Defines how the subject may be taught through a range of complimentary methods. Considers a wide range of assessment practices that meet the varied learning embedded within the subject. Discusses how support for the subject can be achieved by collaboration with a wide range of interested parties. This book is a valuable resource for heads of departments, trainee and practicing teachers, those engaged in further professional development and all who want to make the learning of Design & Technology an interesting, motivating, and exciting experience for young people.
Download or read book Design based Research written by Sasha A. Barab and published by Psychology Press. This book was released on 2016-02-04 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over a decade ago the concept of "design experiments" was introduced because of the belief that many of questions could not be adequately addressed by laboratory-based experiments. Since then, design-based research as a term has grown in popularity and significance. The core manuscripts of this special issue respond to the questions: What constitutes design-based research? Why is it important? What are the methods to carry it out? At the end of this issue, two strong commentaries situate this work and challenge the community with new questions and issues that must be answered if design-based research is going to help advance work in ways that others judge as worthwhile and significant.
Download or read book International Handbook of Technology Education written by and published by BRILL. This book was released on 2006-01-01 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first volume in the International Technology Education Series offers a unique, worldwide collection of national surveys into the developments of Technology Education in the past two decades.
Download or read book Current Perspectives on the Value Teaching Learning and Assessment of Design in STEM Education written by Jeffrey Buckley and published by Frontiers Media SA. This book was released on 2023-08-25 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design is a central activity within Science, Technology, Engineering, and Mathematics (STEM) education. Within enacted practice, design can feature within intended learning outcomes, for example in learning to design, and it can feature within pedagogical methodologies, for example by learning through design. Often holding differing disciplinary interpretations such as design as cyclical problem solving, iterative design, conceptual design, or design with or without make, understanding the educational merits of the ill-defined and open nature of authentic designerly activity is paramount. This Research Topic sets out to gain a more nuanced understanding of the value and role(s) of design within STEM educational contexts. This Research Topic focuses on design within STEM educational contexts, particularly in terms of teaching, learning, and assessment. The aim is to contribute to the evidential basis which can be used to guide the incorporation of design into educational practice. The topic has two central research objectives. The first is to generate evidence regarding what design is in STEM education. For example, is the ability to design a singular or manifold construct? Is the capacity to design, or are factors of this ability, both learnable and teachable? How transferable is designerly knowledge between contexts? How do different disciplinary contexts influence the interpretation of design? The second is to further our understanding of how best to incorporate design within STEM education contexts. For example, how much emphasis should be placed on learning to or through design in school? How should design be assessed within formal education? Where and when is design best incorporated into education? In posing these questions, the goal of this research topic is to provide scholarly discourse which supports critical reflection and the challenging of assumptions regarding design in education.
Download or read book Teaching and Learning about Technological Systems written by Jonas Hallström and published by Springer Nature. This book was released on 2022-01-31 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the teaching and learning about technological systems in technology education and adjacent curriculum areas. It describes, analyzes and synthesizes contemporary research on technological systems in technology education. By delving into the philosophy, sociology and history of technology, technology education and the learning and teaching of technological systems, it summarizes prior research and analyzes new research. This book thereby serves as a resource and reference work for professionals in this area of research and education.
Download or read book Understanding by Design written by Grant P. Wiggins and published by ASCD. This book was released on 2005 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is understanding and how does it differ from knowledge? How can we determine the big ideas worth understanding? Why is understanding an important teaching goal, and how do we know when students have attained it? How can we create a rigorous and engaging curriculum that focuses on understanding and leads to improved student performance in today's high-stakes, standards-based environment? Authors Grant Wiggins and Jay McTighe answer these and many other questions in this second edition of Understanding by Design. Drawing on feedback from thousands of educators around the world who have used the UbD framework since its introduction in 1998, the authors have greatly revised and expanded their original work to guide educators across the K-16 spectrum in the design of curriculum, assessment, and instruction. With an improved UbD Template at its core, the book explains the rationale of backward design and explores in greater depth the meaning of such key ideas as essential questions and transfer tasks. Readers will learn why the familiar coverage- and activity-based approaches to curriculum design fall short, and how a focus on the six facets of understanding can enrich student learning. With an expanded array of practical strategies, tools, and examples from all subject areas, the book demonstrates how the research-based principles of Understanding by Design apply to district frameworks as well as to individual units of curriculum. Combining provocative ideas, thoughtful analysis, and tested approaches, this new edition of Understanding by Design offers teacher-designers a clear path to the creation of curriculum that ensures better learning and a more stimulating experience for students and teachers alike.
Download or read book Technologies for Children written by Marilyn Fleer and published by Cambridge University Press. This book was released on 2023-07-31 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies for Children is a comprehensive guide to teaching design and digital technologies to children from birth to 12 years. Aligned with the Early Years Learning Framework and the Australian Curriculum: Technologies, this book provides practical ideas for teaching infants, toddlers, pre-schoolers and primary-aged children. The third edition includes expanded content on teaching digital technologies, with a new chapter on computational thinking. Key topics covered include food and fibre production, engineering principles and systems, and computational thinking. The content goes beyond discussing the curriculum to consider technology pedagogies, planning, assessment and evaluation. Case studies drawn from Australian primary classrooms and early childhood centres demonstrate the transition from theory to practice. Each chapter is supported by pedagogical reflections, research activities and spotlights, as well as extensive online student resources. Written by Marilyn Fleer, this book presents innovative, engaging and student-centred approaches to integrating technologies in the classroom.
Download or read book Conducting Educational Design Research written by Susan McKenney and published by Routledge. This book was released on 2018-09-03 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Educational design research blends scientific investigation with the systematic development and implementation of solutions to educational challenges. Empirical inquiry is conducted in real learning settings – not laboratories – to craft effective solutions to the complex challenges facing educational practitioners. At the same time, the research is carefully structured to produce theoretical understanding that can serve the work of others. Conducting Educational Design Research, 2nd Edition has been written to support graduate students as well as experienced researchers who are new to this approach. Part I describes the origins, outcomes, and generic approach. Part II discusses the core processes of the generic approach in detail. Part III recommends how to propose, report, and advance educational design research. In addition to expanded treatment of research goals and practicalities, more examples, and attention to design-based implementation research, this new edition features enhanced guidance. For each of the four core processes, this volume offers: assessment tools detailed, behind-the-scenes descriptions of actual project work examples of how specific theories have been used to enrich the work For decades, policies for educational research worldwide have swung back and forth between demanding rigor above all other concerns, and increasing emphasis on impact. These two qualities, rigor and impact, need not be mutually exclusive. This volume supports readers in grasping and realizing the potential of educational design research. It demonstrates how rigorous and relevant investigation can yield both theoretical understanding and solutions to urgent educational challenges.
Download or read book Recent Advances in Science and Technology Education Ranging from Modern Pedagogies to Neuroeducation and Assessment written by Zacharoula Smyrnaiou and published by Cambridge Scholars Publishing. This book was released on 2016-03-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and technology education research, influenced by inquiry-based thinking, not only concentrates on the teaching of scientific concepts and addressing any misconceptions that learners may hold, but also emphasizes the ways in which students learn, and seeks avenues to achieve better learning through creativity. New developments in science and technology education rely on a wide variety of methods, borrowed from various fields of science, such as computer science, cognitive science, sociology and neurosciences. This book presents papers from the first international conference on “New Developments in Science and Technology Education” that was structured around seven main thematic axes: namely modern pedagogies in science and technology education; new technologies in science and technology education; assessment in science and technology education; teaching and learning in the light of inquiry learning methods; neuroscience and science education; conceptual understanding and conceptual change in science; and interest, attitude and motivation in science. It explores the beneficial impact of pedagogically updated practices and approaches in the teaching of science concepts, and elaborates on future challenges and emerging issues that concern science and technology education. By pointing out new research directions, the volume will inform educational practices and bridge the gap between research and practice, providing new information, ideas and perspectives. It will also promote discussions and networking among scientists and stakeholders from worldwide scientific fields, such as researchers, professors, students, and companies developing educational software.
Download or read book Maker Education Meets Technology Education written by and published by BRILL. This book was released on 2023-09-04 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book two fields meet, Technology Education with its long history, and Maker Education, a relative new shoot in the educational field. Both focus on learning through making and both value agency and motivation of learners. The purpose of this book is to understand and analyze the kind of informal and formal educational activities that take place under the umbrella of the Maker Movement and then relate this to the field of Technology Education to uncover what researchers, innovators and teachers in this field can learn from the principles, ideas and practices that are central to the Maker Movement and vice versa. The book contains two types of chapters. The first type is case study chapters that span from Mexico, China, Korea, Denmark, the Netherlands to Kenya and from primary to tertiary level, showing a variety of good practices in maker education including both formal and informal contexts. In the subsequent thematic chapters, dedicated authors have used the case studies to reflect on themes such as curriculum reform, social learning, materiality, spatial thinking, informal versus formal learning as well as the sustainability of learning and relate what is happening in Maker Education with Technology Education to imagine possible futures for Maker Education.
Download or read book Design of Technology Enhanced Learning written by Matt Bower and published by Emerald Group Publishing. This book was released on 2017-08-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains how educational research can inform the design of technology-enhanced learning environments. After laying pedagogical, technological and content foundations, it analyses learning in Web 2.0, Social Networking, Mobile Learning and Virtual Worlds to derive nuanced principles for technology-enhanced learning design.
