Download or read book Design Automation for Field coupled Nanotechnologies written by Marcel Walter and published by Springer Nature. This book was released on 2022-01-10 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the main tasks of Design Automation for Field-coupled Nanocomputing (FCN) technologies, in order to enable large-scale composition of elementary building blocks, that obtain correct systems from given function specifications. To this end, a holistic design flow is described, which covers exact and scalable placement & routing, one-pass logic synthesis, novel clocking mechanisms for data synchronization, and formal verification for obtained circuit layouts. Additionally, theoretical groundwork is presented that lays the foundation for any algorithmic consideration in the future. Furthermore, an open-source FCN design framework called fiction, which contains implementations of all proposed techniques, is presented and made publicly available. The approaches discussed in this book address obstacles that have existed since the conceptualization of the FCN paradigm and could not be resolved since then. As a result, this book substantially advances the state of the art in design automation for FCN technologies.
Download or read book Design Automation and Applications for Emerging Reconfigurable Nanotechnologies written by Shubham Rai and published by Springer Nature. This book was released on 2023-09-11 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a single-source solution for anyone who is interested in exploring emerging reconfigurable nanotechnology at the circuit level. It lays down a solid foundation for circuits based on this technology having considered both manual as well as automated design flows. The authors discuss the entire design flow, consisting of both logic and physical synthesis for reconfigurable nanotechnology-based circuits. The authors describe how transistor reconfigurable properties can be exploited at the logic level to have a more efficient circuit design flow, as compared to conventional design flows suited for CMOS. Further, the book provides insights into hardware security features that can be intrinsically developed using the runtime reconfigurable features of this nanotechnology.
Download or read book Design Automation and Application for Emerging Reconfigurable Nanotechnologies written by Shubham Rai and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Field Coupled Nanocomputing written by Neal G. Anderson and published by Springer. This book was released on 2014-05-31 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Field-coupled nanocomputing (FCN) paradigms offer fundamentally new approaches to digital information processing that do not utilize transistors or require charge transport. Information transfer and computation are achieved in FCN via local field interactions between nanoscale building blocks that are organized in patterned arrays. Several FCN paradigms are currently under active investigation, including quantum-dot cellular automata (QCA), molecular quantum cellular automata (MQCA), nanomagnetic logic (NML), and atomic quantum cellular automata (AQCA). Each of these paradigms has a number of unique features that make it attractive as a candidate for post-CMOS nanocomputing, and each faces critical challenges to realization. This State-of-the-Art-Survey provides a snapshot of the current developments and novel research directions in the area of FCN. The book is divided into five sections. The first part, Field-Coupled Nanocomputing Paradigms, provides valuable background information and perspectives on the QDCA, MQCA, NML, and AQCA paradigms and their evolution. The second section, Circuits and Architectures, addresses a wide variety of current research on FCN clocking strategies, logic synthesis, circuit design and test, logic-in-memory, hardware security, and architecture. The third section, Modeling and Simulation, considers the theoretical modeling and computer simulation of large FCN circuits, as well as the use of simulations for gleaning physical insight into elementary FCN building blocks. The fourth section, Irreversibility and Dissipation, considers the dissipative consequences of irreversible information loss in FCN circuits, their quantification, and their connection to circuit structure. The fifth section, The Road Ahead: Opportunities and Challenges, includes an edited transcript of the panel discussion that concluded the FCN 13 workshop.
Download or read book Field Coupled Nanocomputing written by Neal G. Anderson and published by . This book was released on 2014-06-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions on Computational Science XXIV written by Marina L. Gavrilova and published by Springer. This book was released on 2014-12-06 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: The LNCS journal Transactions on Computational Science reflects recent developments in the field of Computational Science, conceiving the field not as a mere ancillary science but rather as an innovative approach supporting many other scientific disciplines. The journal focuses on original high-quality research in the realm of computational science in parallel and distributed environments, encompassing the facilitating theoretical foundations and the applications of large-scale computations and massive data processing. It addresses researchers and practitioners in areas ranging from aerospace to biochemistry, from electronics to geosciences, from mathematics to software architecture, presenting verifiable computational methods, findings, and solutions and enabling industrial users to apply techniques of leading-edge, large-scale, high performance computational methods. This, the 24th issue of the Transactions on Computational Science journal, guest edited by Himanshu Thapliyal and Nagarajan Ranganathan, is devoted to the topic of reversible computing. It is comprised of eight selected papers on reversible energy recovery designs, design of reversible logic gates and arithmetic circuits in optical computing, reversible basic linear algebra subprograms, quantum circuit description language, and reversible circuit and logic synthesis.
Download or read book Variation Aware Design of Custom Integrated Circuits A Hands on Field Guide written by Trent McConaghy and published by Springer Science & Business Media. This book was released on 2012-10-02 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book targets custom IC designers who are encountering variation issues in their designs, especially for modern process nodes at 45nm and below, such as statistical process variations, environmental variations, and layout effects. It teaches them the state-of-the-art in Variation-Aware Design tools, which help the designer to analyze quickly the variation effects, identify the problems, and fix the problems. Furthermore, this book describes the algorithms and algorithm behavior/performance/limitations, which is of use to designers considering these tools, designers using these tools, CAD researchers, and CAD managers.
Download or read book Design Automation Languages and Simulations written by Wai-Kai Chen and published by CRC Press. This book was released on 2003-03-26 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of electronic systems continues to increase, the micro-electronic industry depends upon automation and simulations to adapt quickly to market changes and new technologies. Compiled from chapters contributed to CRC's best-selling VLSI Handbook, this volume of the Principles and Applications in Engineering series covers a broad range of topics relevant to design automation, languages, and simulations. These include a collaborative framework that coordinates distributed design activities through the Internet, an overview of the Verilog hardware description language and its use in a design environment, hardware/software co-design, system-level design of application-specific systems, and analog circuit simulators.
Download or read book Applications written by Peter Benner and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-12-07 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: An increasing complexity of models used to predict real-world systems leads to the need for algorithms to replace complex models with far simpler ones, while preserving the accuracy of the predictions. This three-volume handbook covers methods as well as applications. This third volume focuses on applications in engineering, biomedical engineering, computational physics and computer science.
Download or read book Computer Aided Design and Design Automation written by Wai-Kai Chen and published by . This book was released on 2009 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on computer-aided design and design automation. This book addresses such topics as modeling of circuit performances, symbolic analysis methods, numerical analysis methods, design by optimization, statistical design optimization, and physical design automation.
Download or read book Embedded Systems Design written by Bruno Bouyssounouse and published by Springer Science & Business Media. This book was released on 2005-03-30 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensive and increasing use of embedded systems and their integration in everyday products mark a significant evolution in information science and technology. Nowadays embedded systems design is subject to seamless integration with the physical and electronic environment while meeting requirements like reliability, availability, robustness, power consumption, cost, and deadlines. Thus, embedded systems design raises challenging problems for research, such as security, reliable and mobile services, large-scale heterogeneous distributed systems, adaptation, component-based development, and validation and tool-based certification. This book results from the ARTIST FP5 project funded by the European Commision. By integration 28 leading European research institutions with many top researchers in the area, this book assesses and strategically advances the state of the art in embedded systems. The coherently written monograph-like book is a valuable source of reference for researchers active in the field and serves well as an introduction to scientists and professionals interested in learning about embedded systems design.
Download or read book Bio Inspired Nanotechnology written by Kaushik Pal and published by Bentham Science Publishers. This book was released on 2023-02-28 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bio-Inspired Nanotechnology focuses on the use of bio-inspired and biomimetic methods for the fabrication and activation of nanomaterials. It summarizes recent developments in biocompatible and biodegradable materials, including their properties, fabrication methods, synthesis protocols, and applications. This includes studies concerning the binding of the biomolecules to the surface of inorganic structures, structure/function relationships of the final materials, and unique applications of such biomimetic materials in harvesting/storage, biomedical diagnostics, and materials assembly. The book chapters also cover a range of available bio-based nanomaterials, including chitin, starch and nanocellulose. It serves as a detailed reference for learners and anyone interested in sustainable nanoscale materials, including materials scientists, biomedical engineers, environmental scientists, food and agriculture manufacturers and scientists.
Download or read book BioMEMS and Biomedical Nanotechnology written by Mihrimah Ozkan and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions reporting on fundamental and applied investigations of the material science, biochemistry, and physics of biomedical microdevices with applications to Genomics and Proteomics. Topics include gene expression profiling utilizing microarray technology; imaging and sensing for gene detection and use in DNA analysis; and coverage of advanced microfluidic devices and the Humane Genome Project.
Download or read book Microelectronic Systems written by Albert Heuberger and published by Springer Science & Business Media. This book was released on 2011-12-26 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to Prof. Dr. Heinz Gerhäuser on the occasion of his retirement both from the position of Executive Director of the Fraunhofer Institute for Integrated Circuits IIS and from the Endowed Chair of Information Technologies with a Focus on Communication Electronics (LIKE) at the Friedrich-Alexander-Universität Erlangen-Nürnberg. Heinz Gerhäuser's vision and entrepreneurial spirit have made the Fraunhofer IIS one of the most successful and renowned German research institutions. He has been Director of the Fraunhofer IIS since 1993, and under his leadership it has grown to become the largest of Germany's 60 Fraunhofer Institutes, a position it retains to this day, currently employing over 730 staff. Likely his most important scientific as well as application-related contribution was his pivotal role in the development of the mp3 format, which would later become a worldwide success. The contributions to this Festschrift were written by both Fraunhofer IIS staff and external project team members in appreciation of Prof. Dr. Gerhäuser's lifetime academic achievements and his inspiring leadership at the Fraunhofer IIS. The papers reflect the broad spectrum of the institute's research activities and are grouped into sections on circuits, information systems, visual computing, and audio and multimedia. They provide academic and industrial researchers in fields like signal processing, sensor networks, microelectronics, and integrated circuits with an up-to-date overview of research results that have a huge potential for cutting-edge industrial applications.
Download or read book Mechatronic Systems and Process Automation written by Patrick O.J. Kaltjob and published by CRC Press. This book was released on 2018-03-09 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the concept of process automation and mechatronic system design, while offering a unified approach and methodology for the modeling, analysis, automation and control, networking, monitoring, and sensing of various machines and processes from single electrical-driven machines to large-scale industrial process operations. This step-by-step guide covers design applications from various engineering disciplines (mechanical, chemical, electrical, computer, biomedical) through real-life mechatronics problems and industrial automation case studies with topics such as manufacturing, power grid, cement production, wind generator, oil refining, incubator, etc. Provides step-by-step procedures for the modeling, analysis, control and automation, networking, monitoring, and sensing of single electrical-driven machines to large-scale industrial process operations. Presents model-based theory and practice guidelines for mechatronics system and process automation design. Includes worked examples in every chapter and numerous end-of-chapter real-life exercises, problems, and case studies.
Download or read book Smart Adaptive Systems on Silicon written by Maurizio Valle and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent/smart systems have become common practice in many engineering applications. On the other hand, current low cost standard CMOS technology (and future foreseeable developments) makes available enormous potentialities. The next breakthrough will be the design and development of "smart adaptive systems on silicon" i.e. very power and highly size efficient complete systems (i.e. sensing, computing and "actuating" actions) with intelligence on board on a single silicon die. Smart adaptive systems on silicon will be able to "adapt" autonomously to the changing environment and will be able to implement "intelligent" behaviour and both perceptual and cognitive tasks. At last, they will communicate through wireless channels, they will be battery supplied or remote powered (via inductive coupling) and they will be ubiquitous in our every day life. Although many books deal with research and engineering topics (i.e. algorithms, technology, implementations, etc.) few of them try to bridge the gap between them and to address the issues related to feasibility, reliability and applications. Smart Adaptive Systems on Silicon, though not exhaustive, tries to fill this gap and to give answers mainly to the feasibility and reliability issues. Smart Adaptive Systems on Silicon mainly focuses on the analog and mixed mode implementation on silicon because this approach is amenable of achieving impressive energy and size efficiency. Moreover, analog systems can be more easily interfaced with sensing and actuating devices.
Download or read book Millimeter Wave Integrated Circuits written by Mladen Božanić and published by Springer Nature. This book was released on 2020-03-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This peer-reviewed book explores the methodologies that are used for effective research, design and innovation in the vast field of millimeter-wave circuits, and describes how these have to be modified to fit the uniqueness of high-frequency nanoelectronics design. Each chapter focuses on a specific research challenge related to either small form factors or higher operating frequencies. The book first examines nanodevice scaling and the emerging electronic design automation tools that can be used in millimeter-wave research, as well as the singular challenges of combining deep-submicron and millimeter-wave design. It also demonstrates the importance of considering, in the millimeter-wave context, system-level design leading to differing packaging options. Further, it presents integrated circuit design methodologies for all major transceiver blocks typically employed at millimeter-wave frequencies, as these methodologies are normally fundamentally different from the traditional design methodologies used in analogue and lower-frequency electronics. Lastly, the book discusses the methodologies of millimeter-wave research and design for extreme or harsh environments, rebooting electronics, the additional opportunities for terahertz research, and the main differences between the approaches taken in millimeter-wave research and terahertz research.
