Download or read book Introduction to OFDM Receiver Design and Simulation written by Y.J. Liu and published by Artech House. This book was released on 2019-11-30 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book is an accessible introduction to Orthogonal frequency-division multiplexing (OFDM) receiver design, a technology that allows digitized data to be carried by multiple carriers. It offers a detailed simulation study of an OFDM algorithm for Wi-Fi and 4G cellular that can be used to understand other OFDM waveforms. Extensive simulation studies are included using the transmissionwaveform given by the IEEE 802.11 standard. Scrambler, error-correcting codes, interleaver and radio-wave propagation model are included. OFDM waveform characteristics, signal acquisition, synchronization issues, channel estimation and tracking, hard and soft decision decoding are all covered. Detailed derivations leading to the final formula for any algorithm are given, which allows the reader to clearly understand the approximations and conditions behind the formulas and apply them appropriately. The algorithms are selected not just for the best performance from simulation study but also for easy implementation. An example is a unique algorithm for signal acquisition using the principle of maximum likelihood detection.

Download or read book Noises in Optical Communications and Photonic Systems written by Le Nguyen Binh and published by CRC Press. This book was released on 2016-11-17 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmitting information over optical fibers requires a high degree of signal integrity due to noise levels existing in optical systems. Proper methods and techniques for noise evaluations are critical in achieving high-performance. This book provides a fundamental understanding of noise generation processes in optical communications and photonic signals. It discusses techniques for noise evaluation in optical communication systems, especially digital optical systems, as well as transmission systems performance and noise impacts in photonic processing systems

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Communication System Design Using DSP Algorithms written by Steven A. Tretter and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for senior electrical engineering students, this textbook explores the theoretical concepts of digital signal processing and communication systems by presenting laboratory experiments using real-time DSP hardware. Each experiment begins with a presentation of the required theory and concludes with instructions for performing them. Engineering students gain experience in working with equipment commonly used in industry. This text features DSP-based algorithms for transmitter and receiver functions.

Download or read book Wireless Transceiver Design written by Ariel Luzzatto and published by John Wiley & Sons. This book was released on 2016-09-08 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building upon the success of the first edition (2007), Wireless Transceiver Design 2nd Edition is an accessible textbook that explains the concepts of wireless transceiver design in detail. The architectures and the detailed design of both traditional and advanced all-digital wireless transceivers are discussed in a thorough and systematic manner, while carefully watching out for clarity and simplicity. Many practical examples and solved problems at the end of each chapter allow students to thoroughly understand the mechanisms involved, to build confidence, and enable them to readily make correct and practical use of the applicable results and formulas. From the instructors' perspective, the book will enable the reader to build courses at different levels of depth, starting from the basic understanding, whilst allowing them to focus on particular elements of study. In addition to numerous fully-solved exercises, the authors include actual exemplary examination papers for instructors to use as a reference format for student evaluation. The new edition has been adapted with instructors/lecturers, graduate/undergraduate students and RF engineers in mind. Non-RF engineers looking to acquire a basic understanding of the main related RF subjects will also find the book invaluable.

Download or read book Modeling and Design Techniques for RF Power Amplifiers written by Arvind Raghavan and published by John Wiley & Sons. This book was released on 2008-02-04 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieve higher levels of performance, integration, compactness, and cost-effectiveness in the design and modeling of radio-frequency (RF) power amplifiers RF power amplifiers are important components of any wireless transmitter, but are often the limiting factors in achieving better performance and lower cost in a wireless communication system—presenting the RF IC design community with many challenges. The next-generation technological advances presented in this book are the result of cutting-edge research in the area of large-signal device modeling and RF power amplifier design at the Georgia Institute of Technology, and have the potential to significantly address issues of performance and cost-effectiveness in this area. Richly complemented with hundreds of figures and equations, Modeling and Design Techniques for RF Power Amplifiers introduces and explores the most important topics related to RF power amplifier design under one concise cover. With a focus on efficiency enhancement techniques and the latest advances in the field, coverage includes: Device modeling for CAD Empirical modeling of bipolar devices Scalable modeling of RF MOSFETs Power amplifier IC design Power amplifier design in silicon Efficiency enhancement of RF power amplifiers The description of state-of-the-art techniques makes this book a valuable and handy reference for practicing engineers and researchers, while the breadth of coverage makes it an ideal text for graduate- and advanced undergraduate-level courses in the area of RF power amplifier design and modeling.

Download or read book Satellite Communication Systems Design written by S. Tirró and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: Writing a comprehensive book on satellite communications requires the com mand of many technical disciplines and the availability of up-to-date information on international recommendations, system architectures, and equipment stand ards. It is therefore necessary to involve many authors, each possessing a good level of knowledge in a particular discipline. The problem of using a coherent and unambiguous set of definitions and basic terms has been solved by including in the book all the background information needed for understanding satellite communication systems, without any major reference to other textbooks specializing in particular disciplines. The obvious consequence of this approach has been the large size of the book, with the advantages, however, of practically complete independence from other books, more systematic discussion of the subject matter, and better readability. After the required background information, emphasis has been placed on the discussion of techniques and system design criteria rather than on specific equipment implementation or description of particular systems. The book may be divided in five parts as follows: • The first five chapters provide most of the required background information. • Chapter 6 is an introductory outline of satellite communication systems. • Chapters 7 to 13 deal with the various aspects of technical system design. • Chapter 14 discusses system economics. • Chapter 15 provides a brief insight into some foreseeable future develop ments of satellite communications.

Download or read book Handbook of Formal Optimization written by Anand J. Kulkarni and published by Springer Nature. This book was released on with total page 1406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Annual International Phoenix Conference on Computers and Communications Conference Proceedings written by Edwin Sprott Towill and published by . This book was released on 1976 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Multi Conference 2011 written by Himanshu B. Soni and published by Universal-Publishers. This book was released on 2011-06-06 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Signals, Systems and Automation (ICSSA 2011) aims to spread awareness in the research and academic community regarding cutting-edge technological advancements revolutionizing the world. The main emphasis of this conference is on dissemination of information, experience, and research results on the current topics of interest through in-depth discussions and participation of researchers from all over the world. The objective is to provide a platform to scientists, research scholars, and industrialists for interacting and exchanging ideas in a number of research areas. This will facilitate communication among researchers in different fields of Electronics and Communication Engineering. The International Conference on Intelligent System and Data Processing (ICISD 2011) is organized to address various issues that will foster the creation of intelligent solutions in the future. The primary goal of the conference is to bring together worldwide leading researchers, developers, practitioners, and educators interested in advancing the state of the art in computational intelligence and data processing for exchanging knowledge that encompasses a broad range of disciplines among various distinct communities. Another goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working in India and abroad.

Download or read book Annual International Phoenix Conference on Computers and Communications written by and published by . This book was released on 1990 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.

Download or read book Quadrature Amplitude Modulation written by Lajos Hanzo and published by Wiley-IEEE Press. This book was released on 2004-11-30 with total page 1144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motivated by the rapid evolution of the consecutive generations of wireless communication systems this volume continues to provide an overview of the majority of single- and multi-carrier QAM techniques. Now fully revised and updated, with more than 300 pages of new material, this new edition presents the wide range of recent developments in the field and places particular emphasis on the family of coded modulation aided OFDM and CDMA schemes. In addition, it also includes a fully revised chapter on adaptive modulation and a new chapter characterizing the design trade-offs of adaptive modulation and space-time coding. Divided into four parts: Part I: commences with a historical perspective and classic schemes for the uninitiated Part II: offers a deep discourse on adaptive QAM arrangements that have found their way also into the 3G system's High Speed Data Packet Access (HSDPA) mode Part III: details the advanced intricacies of adaptive versus space-time block- and trellis-coded OFDM and MC-CDMA Part IV: contains previously unpublished new research results. It commences with a theoretical chapter on the capacity of wireless channels. The discussions then continue by contriving sophisticated iterative coded modulation systems, such as TCM, TTCM, BICM, BICM-ID designed for turbo-detected QAM-based space-time coded OFDM and CDMA systems operating over wireless channels In summary, this volume amalgamates a comprehensive textbook with a deep research monograph on the topic of QAM, ensuring it has a wide-ranging appeal for both senior undergraduate and postgraduate students as well as practicing engineers and researchers.

Download or read book Single and Multi carrier Quadrature Amplitude Modulation written by Lajos L. Hanzo and published by . This book was released on 2000-06-21 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single- and Multi-carrier Quadrature Amplitude Modulation Principles and Applications for Personal Communications, WLANs and Broadcasting L. Hanzo Department of Electronics and Computer Science, University of Southampton, UK W. Webb Motorola, Arlington Heights, USA formerly at Multiple Access Communications Ltd, Southampton, UK T. Keller Ubinetics, Cambridge Technology Centre, Melbourn, UK formerly at Department of Electronics and Computer Science, University of Southampton, UK Motivated by the rapid evolution of wireless communication systems, this expanded second edition provides an overview of most major single- and multi-carrier Quadrature Amplitude Modulation (QAM) techniques commencing with simple QAM schemes for the uninitiated through to complex, rapidly-evolving areas, such as arrangements for wide-band mobile channels. Targeted at the more advanced reader, the multi-carrier modulation based second half of the book presents a research-orientated outlook using a variety of novel QAM-based arrangements. * Features six new chapters dealing with the complexities of multi-carrier modulation which has found applications ranging from Wireless Local Area Networks (WLAN) to Digital Video Broadcasting (DVB) * Provides a rudimentary introduction for readers requiring a background in the field of modulation and radio wave propagation * Discusses classic QAM transmission issues relevant to Gaussian channels * Examines QAM-based transmissions over mobile radio channels * Incorporates QAM-related orthogonal techniques, considers the spectral efficiency of QAM in cellular frequency re-use structures and presents a QAM-based speech communications system design study * Introduces Orthogonal Frequency Division Multiplexing (OFDM) over both Gaussian and wideband fading channels By providing an all-encompassing self-contained treatment of single- and multi- carrier QAM based communications, a wide range of readers including senior undergraduate and postgraduate students, practising engineers and researchers alike will all find the coverage of this book attractive.

Download or read book CED written by and published by . This book was released on 1993 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation of Communication Systems written by Michel C. Jeruchim and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published seven years ago, the field of modeling and simulation of communication systems has grown and matured in many ways, and the use of simulation as a day-to-day tool is now even more common practice. With the current interest in digital mobile communications, a primary area of application of modeling and simulation is now in wireless systems of a different flavor from the `traditional' ones. This second edition represents a substantial revision of the first, partly to accommodate the new applications that have arisen. New chapters include material on modeling and simulation of nonlinear systems, with a complementary section on related measurement techniques, channel modeling and three new case studies; a consolidated set of problems is provided at the end of the book.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2009 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: