Download or read book Design and Implementation of Three phase Inverters Using a TMS320F2812 Digital Signal Processor written by Duehee Lee and published by . This book was released on 2009 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this thesis project was to design and build a three-phase inverter controlled by the TMS320F2812 DSP by Texas Instruments. The TMS320F2812 is controlled in order to make inverters generate output waveforms which mimic the main reference signal coming from a computer. The project included building three different inverters on two platforms including auxiliary circuits and designing five pulse width modulation (PWM) switching algorithms for the inverters. The motivation was that a newly designed inverter was required as an intermediary device between a computer and a laboratory-scaled model of a wind turbine. This type of wind turbine is used to educate students and engineers and to extract experimental wind power data. However, since commercial inverters don't follow the main reference signal which is sent from the computer in order to operate the laboratory-scaled wind turbine, a controllable and variable inverter needed to be designed to receive that signal. The results are as follows. The voltage source inverter (VSI) and the current-controlled voltage source inverter (CC-VSI) were built on the VSI platform, and the current source inverter (CSI) was built on the CSI platform. Furthermore, the TMS320F2812's analog digital converter (ADC) driver circuit and the output LC filter were also designed as auxiliary circuits. Five PWM switching programs were written; three switching algorithms for the VSI, and one algorithm each for the CC-VSI and the CSI. The output waveforms from the combination of hardware and software mentioned above were captured, and they follow the main reference signal very well. Although each of the inverters performed well, the VSI in combination with the Space Vector PWM switching algorithm produced the cleanest output voltage waveforms with the least amount of noise. The inverters built in this thesis project can be applied to the laboratory-scaled wind turbine, the maximum power tracking in solar panels, and equipment for analyzing digital signal processing. However, before using the inverters in those applications, much work remains to be done to solve the problems related to the signal distortion caused by the dead band time, harmonic signals caused by the fixed switching frequency, and the reliability issues caused by mounting on the bread board. In conclusion, although this thesis does not illustrate the entire process of or explain every requirement for building the three inverters, enough information about the topology of the inverters, the hardware design, and the PWM switching algorithms is provided in this thesis to enable one to remake all three of the three-phase inverters.

Download or read book The Closed Loop Control of a Three Phase Inverter Using a DSPACE DS1102 DSP Board written by Derek P. Frasz and published by . This book was released on 1998-12-01 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to enhanced reliability, reductions in cost, and ease of maintenance, the U.S. Navy has decided to shift from radial electrical distribution to DC zonal distribution for shipboard use. Correspondingly, the construction of newer classes of combatant vessels will replace bulky transformers with semiconductor switching DC-DC converters and DC-AC inverters. Electrical Control Units, ECUs, control these converters and inverters. Development of an ECU begins with a prototype design, used by the engineer to test the ability of an experimental algorithm to control a physical system. This thesis research examines the use of the DSPACE DS1102 DSP board as a prototype ECU for a three-phase inverter. A DS1102 monitored currents at the output of a three-phase power MOSFET bridge, performed the signal processing, and accordingly provided the MOSFET gating signals. This research compared several different algorithms, time steps and integration methods implemented by the DSP board. In the experiments, the inverter powered a simple RL load and an induction motor. For the closed-loop control of the induction motor, a speed control algorithm provided command inputs to the previously tested inverter. This thesis research demonstrates that the DS1102 can quickly and effectively prototype the signal processing and control units of the electrical power distribution systems of future U.S. Navy ships.

Download or read book DSP based Space Vector PWM Controlled DC AC Inverter written by Chao Xia and published by . This book was released on 2009 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This thesis introduces the design procedure for three-phase inverter, whose controller is realized with Texas Instruments (TI) TMS320F2812 DSP, and the designed inverter will be used for Uninterrupted Power Supply (UPS)."(vii).

Download or read book Design and Implementation of a Three Phase Inverter Using Pulse Width Modulation written by Robert Malcolm Phillips and published by . This book was released on 2005 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Implementation of Three Phase Three Level T Type Inverters with Droop Control for Parallel Operation written by and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Programming and Use of TMS320F2812 DSP to Control and Regulate Power Electronic Converters written by Baris Bagci and published by . This book was released on 2003 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research to study, operate, and program the 32-bit 150MIPS TMS320F2812 digital signal processor (DSP) developed by Texas Instruments, Inc. In addition, it is an examination of the implementation of fast estimation techniques for control of resonant converters. For this purpose, pulse-width modulation (PWM) signals that are generated using this DSP are used.

Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.

Download or read book High Performance Control of AC Drives with Matlab Simulink Models written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2012-04-13 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to understanding AC machines with exhaustive simulation models to practice design and control Nearly seventy percent of the electricity generated worldwide is used by electrical motors. Worldwide, huge research efforts are being made to develop commercially viable three- and multi-phase motor drive systems that are economically and technically feasible. Focusing on the most popular AC machines used in industry – induction machine and permanent magnet synchronous machine – this book illustrates advanced control techniques and topologies in practice and recently deployed. Examples are drawn from important techniques including Vector Control, Direct Torque Control, Nonlinear Control, Predictive Control, multi-phase drives and multilevel inverters. Key features include: systematic coverage of the advanced concepts of AC motor drives with and without output filter; discussion on the modelling, analysis and control of three- and multi-phase AC machine drives, including the recently developed multi-phase-phase drive system and double fed induction machine; description of model predictive control applied to power converters and AC drives, illustrated together with their simulation models; end-of-chapter questions, with answers and PowerPoint slides available on the companion website www.wiley.com/go/aburub_control This book integrates a diverse range of topics into one useful volume, including most the latest developments. It provides an effective guideline for students and professionals on many vital electric drives aspects. It is an advanced textbook for final year undergraduate and graduate students, and researchers in power electronics, electric drives and motor control. It is also a handy tool for specialists and practicing engineers wanting to develop and verify their own algorithms and techniques.

Download or read book Applications of Power Electronics written by Frede Blaabjerg and published by MDPI. This book was released on 2019-06-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ‎robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ‎smart control of power electronics in devices, microgrids, and at system levels.

Download or read book High Performance Control of AC Drives with Matlab Simulink written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Control of AC Drives with Matlab®/Simulink Explore this indispensable update to a popular graduate text on electric drive techniques and the latest converters used in industry The Second Edition of High Performance Control of AC Drives with Matlab®/Simulink delivers an updated and thorough overview of topics central to the understanding of AC motor drive systems. The book includes new material on medium voltage drives, covering state-of-the-art technologies and challenges in the industrial drive system, as well as their components, and control, current source inverter-based drives, PWM techniques for multilevel inverters, and low switching frequency modulation for voltage source inverters. This book covers three-phase and multiphase (more than three-phase) motor drives including their control and practical problems faced in the field (e.g., adding LC filters in the output of a feeding converter), are considered. The new edition contains links to Matlab®/Simulink models and PowerPoint slides ideal for teaching and understanding the material contained within the book. Readers will also benefit from the inclusion of: A thorough introduction to high performance drives, including the challenges and requirements for electric drives and medium voltage industrial applications An exploration of mathematical and simulation models of AC machines, including DC motors and squirrel cage induction motors A treatment of pulse width modulation of power electronic DC-AC converter, including the classification of PWM schemes for voltage source and current source inverters Examinations of harmonic injection PWM and field-oriented control of AC machines Voltage source and current source inverter-fed drives and their control Modelling and control of multiphase motor drive system Supported with a companion website hosting online resources. Perfect for senior undergraduate, MSc and PhD students in power electronics and electric drives, High Performance Control of AC Drives with Matlab®/Simulink will also earn a place in the libraries of researchers working in the field of AC motor drives and power electronics engineers in industry.

Download or read book Power Electronics in Smart Electrical Energy Networks written by Ryszard Michal Strzelecki and published by Springer Science & Business Media. This book was released on 2008-08-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Power Electronics in Smart Electrical Energy Networks” introduces a new viewpoint on power electronics, re-thinking the basic philosophy governing electricity distribution systems. The proposed concept fully exploits the potential advantages of renewable energy sources and distributed generation (DG), which should not only be connected but also fully integrated into the distribution system in order to increase the efficiency, flexibility, safety, reliability and quality of the electricity and the networks. The transformation of current electricity grids into smart (resilient and interactive) networks necessitates the development, propagation and demonstration of key enabling cost-competitive technologies. A must-read for professionals in power engineering and utility industries, and researchers and postgraduates in distributed electrical power systems, the book presents the features, solutions and applications of the power electronics arrangements useful for future smart electrical energy networks.

Download or read book Permanent Magnet Brushless DC Motor Drives and Controls written by Chang-liang Xia and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced introduction to the simulation and hardware implementation of BLDC motor drives A thorough reference on the simulation and hardware implementation of BLDC motor drives, this book covers recent advances in the control of BLDC motor drives, including intelligent control, sensorless control, torque ripple reduction and hardware implementation. With the guidance of the expert author team, readers will understand the principle, modelling, design and control of BLDC motor drives. The advanced control methods and new achievements of BLDC motor drives, of interest to more advanced readers, are also presented. Focuses on the control of PM brushless DC motors, giving readers the foundations to the topic that they can build on through more advanced reading Systematically guides readers through the subject, introducing basic operational principles before moving on to advanced control algorithms and implementations Covers special issues, such as sensorless control, intelligent control, torque ripple reduction and hardware implementation, which also have applications to other types of motors Includes presentation files with lecture notes and Matlab 7 coding on a companion website for the book

Download or read book Vector Control of Three Phase AC Machines written by Nguyen Phung Quang and published by Springer. This book was released on 2015-05-14 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the vector control of three-phase AC machines, in particular induction motors with squirrel-cage rotors (IM), permanent magnet synchronous motors (PMSM) and doubly-fed induction machines (DFIM), from a practical design and development perspective. The main focus is on the application of IM and PMSM in electrical drive systems, where field-orientated control has been successfully established in practice. It also discusses the use of grid-voltage oriented control of DFIMs in wind power plants. This second, enlarged edition includes new insights into flatness-based nonlinear control of IM, PMSM and DFIM. The book is useful for practitioners as well as development engineers and designers in the area of electrical drives and wind-power technology. It is a valuable resource for researchers and students.

Download or read book Integrated Power Electronic Converters and Digital Control written by Ali Emadi and published by CRC Press. This book was released on 2017-12-19 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the demand for higher efficiencies, smaller output ripple, and smaller converter size for modern power electronic systems, integrated power electronic converters could soon replace conventional switched-mode power supplies. Synthesized integrated converters and related digital control techniques address problems related to cost, space, flexibility, energy efficiency, and voltage regulation—the key factors in digital power management and implementation. Meeting the needs of professionals working in power electronics, as well as advanced engineering students, Integrated Power Electronic Converters and Digital Control explores the many benefits associated with integrated converters. This informative text details boost type, buck type, and buck-boost type integrated topologies, as well as other integrated structures. It discusses concepts behind their operation as well specific applications. Topics discussed include: Isolated DC-DC converters such as flyback, forward, push-pull, full-bridge, and half-bridge Power factor correction and its application Definition of the integrated switched-mode power supplies Steady-state analysis of the boost integrated flyback rectifier energy storage converter Dynamic analysis of the buck integrated forward converter Digital control based on the use of digital signal processors (DSPs) With innovations in digital control becoming ever more pervasive, system designers continue to introduce products that integrate digital power management and control integrated circuit solutions, both hybrid and pure digital. This detailed assessment of the latest advances in the field will help anyone working in power electronics and related industries stay ahead of the curve.

Download or read book Uninterruptible Power Supplies and Active Filters written by Ali Emadi and published by CRC Press. This book was released on 2017-12-19 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: As industry power demands become increasingly sensitive, power quality distortion becomes a critical issue. The recent increase in nonlinear loads drawing non-sinusoidal currents has seen the introduction of various tools to manage the clean delivery of power. Power demands of medical facilities, data storage and information systems, emergency equipment, etc. require uninterrupted, high quality power. Uninterruptible power supplies (UPS) and active filters provide this delivery. The first to treat these power management tools together in a comprehensive discussion, Uninterruptible Power Supplies and Active Filters compares the similarities of UPS, active filters, and unified power quality conditioners. The book features a description of low-cost and reduced-parts configurations presented for the first time in any publication, along with a presentation of advanced digital controllers. These configurations are vital as industries seek to reduce the cost of power management in their operations. As this field of power management technology continues to grow, industry and academia will come to rely upon the comprehensive treatment found within this book. Industrial engineers in power quality, circuits and devices, and aerospace engineers as well as graduate students will find this a complete and insightful resource for studying and applying the tools of this rapidly developing field.

Download or read book Electric Machines written by Hamid A. Toliyat and published by CRC Press. This book was released on 2017-12-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: With countless electric motors being used in daily life, in everything from transportation and medical treatment to military operation and communication, unexpected failures can lead to the loss of valuable human life or a costly standstill in industry. To prevent this, it is important to precisely detect or continuously monitor the working condition of a motor. Electric Machines: Modeling, Condition Monitoring, and Fault Diagnosis reviews diagnosis technologies and provides an application guide for readers who want to research, develop, and implement a more effective fault diagnosis and condition monitoring scheme—thus improving safety and reliability in electric motor operation. It also supplies a solid foundation in the fundamentals of fault cause and effect. Combines Theoretical Analysis and Practical Application Written by experts in electrical engineering, the book approaches the fault diagnosis of electrical motors through the process of theoretical analysis and practical application. It begins by explaining how to analyze the fundamentals of machine failure using the winding functions method, the magnetic equivalent circuit method, and finite element analysis. It then examines how to implement fault diagnosis using techniques such as the motor current signature analysis (MCSA) method, frequency domain method, model-based techniques, and a pattern recognition scheme. Emphasizing the MCSA implementation method, the authors discuss robust signal processing techniques and the implementation of reference-frame-theory-based fault diagnosis for hybrid vehicles. Fault Modeling, Diagnosis, and Implementation in One Volume Based on years of research and development at the Electrical Machines & Power Electronics (EMPE) Laboratory at Texas A&M University, this book describes practical analysis and implementation strategies that readers can use in their work. It brings together, in one volume, the fundamentals of motor fault conditions, advanced fault modeling theory, fault diagnosis techniques, and low-cost DSP-based fault diagnosis implementation strategies.

Download or read book Power Electronics and Renewable Energy Systems written by C. Kamalakannan and published by Springer. This book was released on 2014-11-19 with total page 1546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of high-quality peer-reviewed research papers presented in the Proceedings of International Conference on Power Electronics and Renewable Energy Systems (ICPERES 2014) held at Rajalakshmi Engineering College, Chennai, India. These research papers provide the latest developments in the broad area of Power Electronics and Renewable Energy. The book discusses wide variety of industrial, engineering and scientific applications of the emerging techniques. It presents invited papers from the inventors/originators of new applications and advanced technologies.