Download or read book Fundamentals of Signals and Systems Using MATLAB written by Edward W. Kamen and published by Macmillan College. This book was released on 1997 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents an accessible yet comprehensive analytical treatment of signals and systems, and also incorporates a strong emphasis on solving problems and exploring concepts using MATLAB

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the though that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemi nation. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 37 (thesis year 1992) a total of 12,549 thesis titles from 25 Canadian and 153 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 37 reports theses submitted in 1992, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book Signal Processing for Active Control written by Stephen Elliott and published by Elsevier. This book was released on 2000-09-26 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signal Processing for Active Control sets out the signal processing and automatic control techniques that are used in the analysis and implementation of active systems for the control of sound and vibration. After reviewing the performance limitations introduced by physical aspects of active control, Stephen Elliott presents the calculation of the optimal performance and the implementation of adaptive real time controllers for a wide variety of active control systems.Active sound and vibration control are technologically important problems with many applications. 'Active control' means controlling disturbance by superimposing a second disturbance on the original source of disturbance. Put simply, initial noise + other specially-generated noise or vibration = silence [or controlled noise]. This book presents a unified approach to techniques that are used in the analysis and implementation of different control systems. It includes practical examples at the end of each chapter to illustrate the use of various approaches.This book is intended for researchers, engineers, and students in the field of acoustics, active control, signal processing, and electrical engineering.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Control written by Ioan Doré Landau and published by Springer Science & Business Media. This book was released on 2011-06-06 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Control (second edition) shows how a desired level of system performance can be maintained automatically and in real time, even when process or disturbance parameters are unknown and variable. It is a coherent exposition of the many aspects of this field, setting out the problems to be addressed and moving on to solutions, their practical significance and their application. Discrete-time aspects of adaptive control are emphasized to reflect the importance of digital computers in the application of the ideas presented. The second edition is thoroughly revised to throw light on recent developments in theory and applications with new chapters on: multimodel adaptive control with switching, direct and indirect adaptive regulation and adaptive feedforward disturbance compensation. Many algorithms are newly presented in MATLAB® m-file format to facilitate their employment in real systems. Classroom-tested slides for instructors to use in teaching this material are also now provided. All of this supplementary electronic material can be downloaded from fill in URL. The core material is also up-dated and re-edited to keep its perspective in line with modern ideas and more closely to associate algorithms with their applications giving the reader a solid grounding in: synthesis and analysis of parameter adaptation algorithms, recursive plant model identification in open and closed loop, robust digital control for adaptive control; • robust parameter adaptation algorithms, practical considerations and applications, including flexible transmission systems, active vibration control and broadband disturbance rejection and a supplementary introduction on hot dip galvanizing and a phosphate drying furnace. Control researchers and applied mathematicians will find Adaptive Control of significant and enduring interest and its use of example and application will appeal to practitioners working with unknown- and variable-parameter plant. Praise for the first edition: ...well written, interesting and easy to follow, so that it constitutes a valuable addition to the monographies in adaptive control for discrete-time linear systems... suitable (at least in part) for use in graduate courses in adaptive control.

Download or read book Algorithms and Architectures for Real Time Control 1992 written by P.J. Fleming and published by Elsevier. This book was released on 2014-05-23 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Workshop focuses on such issues as control algorithms which are suitable for real-time use, computer architectures which are suitable for real-time control algorithms, and applications for real-time control issues in the areas of parallel algorithms, multiprocessor systems, neural networks, fault-tolerance systems, real-time robot control identification, real-time filtering algorithms, control algorithms, fuzzy control, adaptive and self-tuning control, and real-time control applications.

Download or read book Adaptive Systems in Control and Signal Processing 1995 written by Cs. Banyasz and published by Elsevier. This book was released on 2014-05-23 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading academic and industrial researchers working with adaptive systems and signal processing have been given the opportunity to exchange ideas, concepts and solutions at the IFAC Symposia on Adaptive Systems in Control and Signal Processing. This postprint volume contains all those papers which were presented at the 5th IFAC Symposium in Budapest in 1995. The technical program was composed of a number of invited and contributed sessions and a special case study session, providing a good balance between applications and theory oriented papers.

Download or read book Robust Adaptive Control written by Petros Ioannou and published by Courier Corporation. This book was released on 2013-09-26 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in a tutorial style, this comprehensive treatment unifies, simplifies, and explains most of the techniques for designing and analyzing adaptive control systems. Numerous examples clarify procedures and methods. 1995 edition.

Download or read book Adaptive and Robust Active Vibration Control written by Ioan Doré Landau and published by Springer. This book was released on 2016-09-15 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book approaches the design of active vibration control systems from the perspective of today’s ideas of computer control. It formulates the various design problems encountered in the active management of vibration as control problems and searches for the most appropriate tools to solve them. The experimental validation of the solutions proposed on relevant tests benches is also addressed. To promote the widespread acceptance of these techniques, the presentation eliminates unnecessary theoretical developments (which can be found elsewhere) and focuses on algorithms and their use. The solutions proposed cannot be fully understood and creatively exploited without a clear understanding of the basic concepts and methods, so these are considered in depth. The focus is on enhancing motivations, algorithm presentation and experimental evaluation. MATLAB®routines, Simulink® diagrams and bench-test data are available for download and encourage easy assimilation of the experimental and exemplary material. Three major problems are addressed in the book: active damping to improve the performance of passive absorbers; adaptive feedback attenuation of single and multiple tonal vibrations; and feedforward and feedback attenuation of broad band vibrations. Adaptive and Robust Active Vibration Control will interest practising engineers and help them to acquire new concepts and techniques with good practical validation. It can be used as the basis for a course for graduate students in mechanical, mechatronics, industrial electronics, aerospace and naval engineering. Readers working in active noise control will also discover techniques with a high degree of cross-over potential for use in their field.

Download or read book Proceedings of the ASME Dynamic Systems and Control Division 2003 written by and published by . This book was released on 2003 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Control for Robotic Manipulators written by Dan Zhang and published by CRC Press. This book was released on 2017-02-03 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The robotic mechanism and its controller make a complete system. As the robotic mechanism is reconfigured, the control system has to be adapted accordingly. The need for the reconfiguration usually arises from the changing functional requirements. This book will focus on the adaptive control of robotic manipulators to address the changed conditions. The aim of the book is to summarise and introduce the state-of-the-art technologies in the field of adaptive control of robotic manipulators in order to improve the methodologies on the adaptive control of robotic manipulators. Advances made in the past decades are described in the book, including adaptive control theories and design, and application of adaptive control to robotic manipulators.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1991 with total page 1380 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book System Identification and Adaptive Control written by Yiannis Boutalis and published by Springer Science & Business. This book was released on 2014-04-23 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting current trends in the development and applications of intelligent systems in engineering, this monograph focuses on recent research results in system identification and control. The recurrent neurofuzzy and the fuzzy cognitive network (FCN) models are presented. Both models are suitable for partially-known or unknown complex time-varying systems. Neurofuzzy Adaptive Control contains rigorous proofs of its statements which result in concrete conclusions for the selection of the design parameters of the algorithms presented. The neurofuzzy model combines concepts from fuzzy systems and recurrent high-order neural networks to produce powerful system approximations that are used for adaptive control. The FCN model stems from fuzzy cognitive maps and uses the notion of “concepts” and their causal relationships to capture the behavior of complex systems. The book shows how, with the benefit of proper training algorithms, these models are potent system emulators suitable for use in engineering systems. All chapters are supported by illustrative simulation experiments, while separate chapters are devoted to the potential industrial applications of each model including projects in: • contemporary power generation; • process control and • conventional benchmarking problems. Researchers and graduate students working in adaptive estimation and intelligent control will find Neurofuzzy Adaptive Control of interest both for the currency of its models and because it demonstrates their relevance for real systems. The monograph also shows industrial engineers how to test intelligent adaptive control easily using proven theoretical results.

Download or read book Acoustic Echo and Noise Control written by Eberhard Hänsler and published by John Wiley & Sons. This book was released on 2005-02-04 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors are well known and highly recognized by the "acoustic echo and noise community." Presents a detailed description of practical methods to control echo and noise Develops a statistical theory for optimal control parameters and presents practical estimation and approximation methods

Download or read book Vibration Control written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2010-08-18 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibrations are a part of our environment and daily life. Many of them are useful and are needed for many purposes, one of the best example being the hearing system. Nevertheless, vibrations are often undesirable and have to be suppressed or reduced, as they may be harmful to structures by generating damages or compromise the comfort of users through noise generation of mechanical wave transmission to the body. the purpose of this book is to present basic and advanced methods for efficiently controlling the vibrations and limiting their effects. Open-access publishing is an extraordinary opportunity for a wide dissemination of high quality research. This book is not an exception to this, and I am proud to introduce the works performed by experts from all over the world.

Download or read book Adaptive Control Systems written by Gang Feng and published by Elsevier. This book was released on 1999-05-10 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive control is no longer just an important theoretical field of study, but is also providing solutions to real-world problems. Adaptive techniques will transform the world of control. The leading world practitioners of adaptive control have contributed to this handbook which is the most important work yet in this field. Not only are techniques described in theory, but detailed control algorithms are given, making this a practical cookbook of adaptive control for both control professionals and practising engineers.The book presents the most advanced techniques and algorithms of adaptive control. These include various robust techniques, performance enhancement techniques, techniques with less a-priori knowledge, nonlinear adaptive control techniques and intelligent adaptive techniques. Each technique described has been developed to provide a practical solution to a real-life problem. This volume will therefore not only advance the field of adaptive control as an area of study, but will also show how the potential of this technology can be realised and offer significant benefits. - Practical cookbook of adaptive control - Contains important research

Download or read book Active Control of Noise and Vibration written by Colin Hansen and published by CRC Press. This book was released on 2012-11-02 with total page 1564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating active control of both sound and vibration, this comprehensive two-volume set combines coverage of fundamental principles with the most recent theoretical and practical developments. The authors explain how to design and implement successful active control systems in practice and detail the pitfalls one must avoid to ensure a reliable and stable system. Extensively revised, updated, and expanded throughout, the second edition reflects the advances that have been made in algorithms, DSP hardware, and applications since the publication of the first edition.