Download or read book Science Abstracts written by and published by . This book was released on 1993 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Practices of Interconnection Networks written by William James Dally and published by Elsevier. This book was released on 2004-03-06 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges faced by designers of digital systems is optimizing the communication and interconnection between system components. Interconnection networks offer an attractive and economical solution to this communication crisis and are fast becoming pervasive in digital systems. Current trends suggest that this communication bottleneck will be even more problematic when designing future generations of machines. Consequently, the anatomy of an interconnection network router and science of interconnection network design will only grow in importance in the coming years.This book offers a detailed and comprehensive presentation of the basic principles of interconnection network design, clearly illustrating them with numerous examples, chapter exercises, and case studies. It incorporates hardware-level descriptions of concepts, allowing a designer to see all the steps of the process from abstract design to concrete implementation. - Case studies throughout the book draw on extensive author experience in designing interconnection networks over a period of more than twenty years, providing real world examples of what works, and what doesn't. - Tightly couples concepts with implementation costs to facilitate a deeper understanding of the tradeoffs in the design of a practical network. - A set of examples and exercises in every chapter help the reader to fully understand all the implications of every design decision.
Download or read book Routing Algorithms in Networks on Chip written by Maurizio Palesi and published by Springer Science & Business Media. This book was released on 2013-10-22 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a single-source reference to routing algorithms for Networks-on-Chip (NoCs), as well as in-depth discussions of advanced solutions applied to current and next generation, many core NoC-based Systems-on-Chip (SoCs). After a basic introduction to the NoC design paradigm and architectures, routing algorithms for NoC architectures are presented and discussed at all abstraction levels, from the algorithmic level to actual implementation. Coverage emphasizes the role played by the routing algorithm and is organized around key problems affecting current and next generation, many-core SoCs. A selection of routing algorithms is included, specifically designed to address key issues faced by designers in the ultra-deep sub-micron (UDSM) era, including performance improvement, power, energy, and thermal issues, fault tolerance and reliability.
Download or read book Algorithms and Parallel Computing written by Fayez Gebali and published by John Wiley & Sons. This book was released on 2011-03-29 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a software gap between the hardware potential and the performance that can be attained using today's software parallel program development tools. The tools need manual intervention by the programmer to parallelize the code. Programming a parallel computer requires closely studying the target algorithm or application, more so than in the traditional sequential programming we have all learned. The programmer must be aware of the communication and data dependencies of the algorithm or application. This book provides the techniques to explore the possible ways to program a parallel computer for a given application.
Download or read book High Performance Computing Systems and Applications written by Nikitas J. Dimopoulos and published by Springer Science & Business Media. This book was released on 2002 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Computing Systems and Applications contains a selection of fully refereed papers presented at the 14th International Conference on High Performance Computing Systems and Applications held in Victoria, Canada, in June 2000. This book presents the latest research in HPC Systems and Applications, including distributed systems and architecture, numerical methods and simulation, network algorithms and protocols, computer architecture, distributed memory, and parallel algorithms. It also covers such topics as applications in astrophysics and space physics, cluster computing, numerical simulations for fluid dynamics, electromagnetics and crystal growth, networks and the Grid, and biology and Monte Carlo techniques. High Performance Computing Systems and Applications is suitable as a secondary text for graduate level courses, and as a reference for researchers and practitioners in industry.
Download or read book Interconnection Networks written by Jose Duato and published by Morgan Kaufmann. This book was released on 2003 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword -- Foreword to the First Printing -- Preface -- Chapter 1 -- Introduction -- Chapter 2 -- Message Switching Layer -- Chapter 3 -- Deadlock, Livelock, and Starvation -- Chapter 4 -- Routing Algorithms -- Chapter 5 -- CollectiveCommunicationSupport -- Chapter 6 -- Fault-Tolerant Routing -- Chapter 7 -- Network Architectures -- Chapter 8 -- Messaging Layer Software -- Chapter 9 -- Performance Evaluation -- Appendix A -- Formal Definitions for Deadlock Avoidance -- Appendix B -- Acronyms -- References -- Index.
Download or read book Handbook of Hardware Software Codesign written by Soonhoi Ha and published by Springer. This book was released on 2017-10-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents fundamental knowledge on the hardware/software (HW/SW) codesign methodology. Contributing expert authors look at key techniques in the design flow as well as selected codesign tools and design environments, building on basic knowledge to consider the latest techniques. The book enables readers to gain real benefits from the HW/SW codesign methodology through explanations and case studies which demonstrate its usefulness. Readers are invited to follow the progress of design techniques through this work, which assists readers in following current research directions and learning about state-of-the-art techniques. Students and researchers will appreciate the wide spectrum of subjects that belong to the design methodology from this handbook.
Download or read book Dictionary of Acronyms and Technical Abbreviations written by Jakob Vlietstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Dictionary covers information and communication technology (ICT), including hardware and software; information networks, including the Internet and the World Wide Web; automatic control; and ICT-related computer-aided fields. The Dictionary also lists abbreviated names of relevant organizations, conferences, symposia and workshops. This reference is important for all practitioners and users in the areas mentioned above, and those who consult or write technical material. This Second Edition contains 10,000 new entries, for a total of 33,000.
Download or read book Designing 2D and 3D Network on Chip Architectures written by Konstantinos Tatas and published by Springer Science & Business Media. This book was released on 2013-10-08 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers key concepts in the design of 2D and 3D Network-on-Chip interconnect. It highlights design challenges and discusses fundamentals of NoC technology, including architectures, algorithms and tools. Coverage focuses on topology exploration for both 2D and 3D NoCs, routing algorithms, NoC router design, NoC-based system integration, verification and testing, and NoC reliability. Case studies are used to illuminate new design methodologies.
Download or read book Network Processor Design written by Patrick Crowley and published by Morgan Kaufmann. This book was released on 2003 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past few years have seen significant change in the landscape of high-end network processing. In response to the formidable challenges facing this emerging field, the editors of this series set out to survey the latest research and practices in the design, programming, and use of network processors. Through chapters on hardware, software, performance and modeling, Volume 3 illustrates the potential for new NP applications, helping to lay a theoretical foundation for the architecture, evaluation, and programming of networking processors. Like Volume 2 of the series, Volume 3 further shifts the focus from achieving higher levels of packet processing performance to addressing other critical factors such as ease of programming, application developments, power, and performance prediction. In addition, Volume 3 emphasizes forward-looking, leading-edge research in the areas of architecture, tools and techniques, and applications such as high-speed intrusion detection and prevention system design, and the implementation of new interconnect standards. *Investigates current applications of network processor technology at Intel; Infineon Technologies; and NetModule. Presents current research in network processor design in three distinct areas: *Architecture at Washington University, St. Louis; Oregon Health and Science University; University of Georgia; and North Carolina State University. *Tools and Techniques at University of Texas, Austin; Academy of Sciences, China; University of Paderborn, Germany; and University of Massachusetts, Amherst. *Applications at University of California, Berkeley; Universidad Complutense de Madrid, Spain; ETH Zurich, Switzerland; Georgia Institute of Technology; Vrije Universiteit, the Netherlands; and Universiteit Leiden, the Netherlands.
Download or read book Networks on Chips written by Giovanni De Micheli and published by Elsevier. This book was released on 2006-08-30 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of today's semiconductor chips for various applications, such as telecommunications, poses various challenges due to the complexity of these systems. These highly complex systems-on-chips demand new approaches to connect and manage the communication between on-chip processing and storage components and networks on chips (NoCs) provide a powerful solution. This book is the first to provide a unified overview of NoC technology. It includes in-depth analysis of all the on-chip communication challenges, from physical wiring implementation up to software architecture, and a complete classification of their various Network-on-Chip approaches and solutions.* Leading-edge research from world-renowned experts in academia and industry with state-of-the-art technology implementations/trends* An integrated presentation not currently available in any other book* A thorough introduction to current design methodologies and chips designed with NoCs
Download or read book Networks on Chip written by Axel Jantsch and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the number of processor cores and IP blocks integrated on a single chip is steadily growing, a systematic approach to design the communication infrastructure becomes necessary. Different variants of packed switched on-chip networks have been proposed by several groups during the past two years. This book summarizes the state of the art of these efforts and discusses the major issues from the physical integration to architecture to operating systems and application interfaces. It also provides a guideline and vision about the direction this field is moving to. Moreover, the book outlines the consequences of adopting design platforms based on packet switched network. The consequences may in fact be far reaching because many of the topics of distributed systems, distributed real-time systems, fault tolerant systems, parallel computer architecture, parallel programming as well as traditional system-on-chip issues will appear relevant but within the constraints of a single chip VLSI implementation.
Download or read book Nano CMOS Circuit and Physical Design written by Ban Wong and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the authors' expansive collection of notes taken over the years, Nano-CMOS Circuit and Physical Design bridges the gap between physical and circuit design and fabrication processing, manufacturability, and yield. This innovative book covers: process technology, including sub-wavelength optical lithography; impact of process scaling on circuit and physical implementation and low power with leaky transistors; and DFM, yield, and the impact of physical implementation.
Download or read book On Chip Networks written by Natalie Enright Jerger and published by Morgan & Claypool Publishers. This book was released on 2017-06-19 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book targets engineers and researchers familiar with basic computer architecture concepts who are interested in learning about on-chip networks. This work is designed to be a short synthesis of the most critical concepts in on-chip network design. It is a resource for both understanding on-chip network basics and for providing an overview of state of the-art research in on-chip networks. We believe that an overview that teaches both fundamental concepts and highlights state-of-the-art designs will be of great value to both graduate students and industry engineers. While not an exhaustive text, we hope to illuminate fundamental concepts for the reader as well as identify trends and gaps in on-chip network research. With the rapid advances in this field, we felt it was timely to update and review the state of the art in this second edition. We introduce two new chapters at the end of the book. We have updated the latest research of the past years throughout the book and also expanded our coverage of fundamental concepts to include several research ideas that have now made their way into products and, in our opinion, should be textbook concepts that all on-chip network practitioners should know. For example, these fundamental concepts include message passing, multicast routing, and bubble flow control schemes.
Download or read book Distributed Computing written by David Peleg and published by SIAM. This book was released on 2000-01-01 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives a thorough exposition of network spanners and other locality-preserving network representations such as sparse covers and partitions.
Download or read book Algorithms and Architectures for Parallel Processing written by Shadi Ibrahim and published by Springer. This book was released on 2017-08-12 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 17th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2017, held in Helsinki, Finland, in August 2017. The 25 full papers presented were carefully reviewed and selected from 117 submissions. They cover topics such as parallel and distributed architectures; software systems and programming models; distributed and network-based computing; big data and its applications; parallel and distributed algorithms; applications of parallel and distributed computing; service dependability and security in distributed and parallel systems; service dependability and security in distributed and parallel systems; performance modeling and evaluation.This volume also includes 41 papers of four workshops, namely: the 4th International Workshop on Data, Text, Web, and Social Network Mining (DTWSM 2017), the 5th International Workshop on Parallelism in Bioinformatics (PBio 2017), the First International Workshop on Distributed Autonomous Computing in Smart City (DACSC 2017), and the Second International Workshop on Ultrascale Computing for Early Researchers (UCER 2017).
Download or read book On chip Networks written by Natalie D. Enright Jerger and published by Morgan & Claypool. This book was released on 2009 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the ability to integrate a large number of cores on a single chip, research into on-chip networks to facilitate communication becomes increasingly important. On-chip networks seek to provide a scalable and high-bandwidth communication substrate for multi-core and many-core architectures. High bandwidth and low latency within the on-chip network must be achieved while fitting within tight area and power budgets. In this lecture, we examine various fundamental aspects of on-chip network design and provide the reader with an overview of the current state-of-the-art research in this field. Table of Contents: Introduction / Interface with System Architecture / Topology / Routing / Flow Control / Router Microarchitecture / Conclusions
