Download or read book Personalized Hip and Knee Joint Replacement written by Charles Rivière and published by Springer Nature. This book was released on 2020-06-30 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book describes and illustrates the surgical techniques, implants, and technologies used for the purpose of personalized implantation of hip and knee components. This new and flourishing treatment philosophy offers important benefits over conventional systematic techniques, including component positioning appropriate to individual anatomy, improved surgical reproducibility and prosthetic performance, and a reduction in complications. The techniques described in the book aim to reproduce patients’ native anatomy and physiological joint laxity, thereby improving the prosthetic hip/knee kinematics and functional outcomes in the quest of the forgotten joint. They include kinematically aligned total knee/total hip arthroplasty, partial knee replacement, and hip resurfacing. The relevance of available and emerging technological tools for these personalized approaches is also explained, with coverage of, for example, robotics, computer-assisted surgery, and augmented reality. Contributions from surgeons who are considered world leaders in diverse fields of this novel surgical philosophy make this open access book will invaluable to a wide readership, from trainees at all levels to consultants practicing lower limb surgery

Download or read book Design Tools and Methods in Industrial Engineering written by Caterina Rizzi and published by Springer Nature. This book was released on 2019-09-19 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge design methods and tools in industrial engineering, advanced findings in mechanics and material science, and relevant technological applications. Topics span from geometric modelling tools to applications of virtual/augmented reality, from interactive design to ergonomics, human factors research and reverse engineering. Further topics include integrated design and optimization methods, as well as experimental validation techniques for product, processes and systems development, such as additive manufacturing technologies. This book is based on the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, held on September 9–10, 2019, in Modena, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering “Enzo Ferrari” of the University of Modena and Reggio Emilia, Italy. It provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.

Download or read book Essentials of 3D Biofabrication and Translation written by Anthony Atala and published by Academic Press. This book was released on 2015-07-17 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentials of 3D Biofabrication and Translation discusses the techniques that are making bioprinting a viable alternative in regenerative medicine. The book runs the gamut of topics related to the subject, including hydrogels and polymers, nanotechnology, toxicity testing, and drug screening platforms, also introducing current applications in the cardiac, skeletal, and nervous systems, and organ construction. Leaders in clinical medicine and translational science provide a global perspective of the transformative nature of this field, including the use of cells, biomaterials, and macromolecules to create basic building blocks of tissues and organs, all of which are driving the field of biofabrication to transform regenerative medicine. - Provides a new and versatile method to fabricating living tissue - Discusses future applications for 3D bioprinting technologies, including use in the cardiac, skeletal, and nervous systems, and organ construction - Describes current approaches and future challenges for translational science - Runs the gamut of topics related to the subject, from hydrogels and polymers to nanotechnology, toxicity testing, and drug screening platforms

Download or read book 3 D Imaging Technologies in Facial Plastic Surgery An Issue of Facial Plastic Surgery Clinics written by John Pallanch and published by Elsevier Health Sciences. This book was released on 2011-11-28 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: A global pool of surgeons and researchers using 3-dimensional imaging for facial plastic surgery present topics on: Image fusion in pre-operative planning; The use of 3D imaging tools including stereolithographic modeling and intraoperative navigation for maxillo-mandibular and complex orbital reconstruction; Custom-made, three-dimensional, intraoperative surgical guides for nasal reconstruction; The benefits and limits of using an integrated 3D virtual approach for maxillofacial surgery; 3D volume assessment techniques and computer-aided design and manufacturing for pre-operative fabrication of implants in head and neck reconstruction; A comparison of different new 3D imaging technologies in facial plastic surgery; 3-D photography in the objective analysis of volume augmentation including fat augmentation and dermal fillers; Assessment of different rhinoplasty techniques by overlay of before and after 3D images; 3D volumetric analysis of combined facial lifting and volumizing (volume enhancement); 3-D facial measurements and perceptions of attractiveness; Teaching 3-D sculpting to Facial Plastic Surgeons, 3-D insights on aesthetics; Creation of the virtual patient for the study of facial morphology; 3-dimensional video analysis of facial movement; 3D modeling of the behavior of facial soft tissues for understanding facial plastic surgery interventions.

Download or read book Visual Informatics Sustaining Research and Innovations written by Halimah Badioze Zaman and published by Springer Science & Business Media. This book was released on 2011-10-28 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 7066 and LNCS 7067 constitutes the proceedings of the Second International Visual Informatics Conference, IVIC 2011, held in Selangor, Malaysia, during November 9-11, 2011. The 71 revised papers presented were carefully reviewed and selected for inclusion in these proceedings. They are organized in topical sections named computer vision and simulation; virtual image processing and engineering; visual computing; and visualisation and social computing. In addition the first volume contains two keynote speeches in full paper length, and one keynote abstract.

Download or read book Virtual Surgical Planning and 3D Printing in Head and Neck Tumor Resection and Reconstruction written by Richard Yuxiong Su and published by Frontiers Media SA. This book was released on 2022-09-19 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Facial Aesthetics written by Farhad B. Naini and published by John Wiley & Sons. This book was released on 2011-03-21 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Facial Aesthetics: Concepts and Clinical Diagnosis is a unique new illustrated resource for facial aesthetic surgery and dentistry, providing the comprehensive clinical textbook on the art and science of facial aesthetics for clinicians involved in the management of facial deformities, including orthodontists, oral and maxillofacial surgeons, plastic and reconstructive surgeons and aesthetic dentists. It aims to provide readers with a comprehensive examination of facial aesthetics in the context of dentofacial and craniofacial diagnosis and treatment planning. This aim is achieved through coupling meticulous research and practical clinical advice with beautifully drawn supporting illustrations and diagrams. Structured over 24 logically arranged and easy-to-follow chapters, Part I of Facial Aesthetics covers the historical evidence for facial aesthetic canons and concepts in depth. It incorporates all aspects relevant to the work of the clinician, including the philosophical and scientific theories of facial beauty, facial attractiveness research, facial expression and the psychosocial ramifications of facial deformities. Part II of the book then goes on to examine clinical evaluation and diagnosis in considerable detail under four sections, from the initial consultation interview and acquisition of diagnostic records (section 1), complete clinical examination and analysis of the craniofacial complex (section 2), in depth analysis of each individual facial region using a top-down approach (section 3) and finally focussing on smile and dentogingival aesthetic evaluation (section 4). An in-depth, thoughtful, practical and absorbing reference, Facial Aesthetics will find an enthusiastic reception among facial aesthetic surgeons and aesthetic dentists with an interest in refining their understanding and appreciation of the human face and applying practical protocols to their clinical diagnosis and treatment planning. Key features: Examines facial aesthetics in a clinical context Promotes an interdisciplinary approach to facial aesthetic analysis Detailed description of the systematic clinical evaluation of the facial soft tissues and craniodentoskeletal complex Detailed, step-by-step aesthetic analysis of each facial region In-depth analysis of 2D and 3D clinical diagnostic records Evidence-based approach, from antiquity to contemporary scientific evidence, to the guidelines employed in planning the correction of facial deformities Treatment planning from first principles highlighted Clinical notes are highlighted throughout Clearly organized and practical format Highly illustrated in full colour throughout

Download or read book Computer Methods in Biomechanics and Biomedical Engineering 2 written by J. Middleton and published by CRC Press. This book was released on 2020-09-10 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers presented at the Third International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (1997), which provide evidence that computer-based models, and in particular numerical methods, are becoming essential tools for the solution of many problems encountered in the field of biomedical engineering. The range of subject areas presented include the modeling of hip and knee joint replacements, assessment of fatigue damage in cemented hip prostheses, nonlinear analysis of hard and soft tissue, methods for the simulation of bone adaptation, bone reconstruction using implants, and computational techniques to model human impact. Computer Methods in Biomechanics and Biomedical Engineering also details the application of numerical techniques applied to orthodontic treatment together with introducing new methods for modeling and assessing the behavior of dental implants, adhesives, and restorations. For more information, visit the "http://www.uwcm.ac.uk/biorome/international symposium on Computer Methods in Biomechanics and Biomedical Engineering/home page, or "http://www.gbhap.com/Computer_Methods_Biomechanic s_Biome dical_Engineering/" the home page for the journal.

Download or read book Medical Imaging written by and published by . This book was released on 2001 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The High risk Surgical Patient written by Paolo Aseni and published by Springer Nature. This book was released on 2023-03-07 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well known that certain diseases and patient conditions are associated with increased perioperative risk. The aim of this book is to define and identify the clinical factors that warrant a broader and more detailed assessment of pre-operative surgical risk in difficult and unusual clinical settings. One of the sections is dedicated to the main pathway of peri- and post-surgical critical care based on the patient-specific deterioration risk and associated diseases; here, a panel of selected experts describes the correct patient-oriented pathways for complex or unscheduled surgical operations in order to reduce the operative risk. In addition, the book describes the latest trends in minimally invasive surgical techniques that are associated with peri- and post-operative risk reduction, and provides an overview of recent advances in surgical simulation, focusing on perspectives in surgical research to increase patient safety. Guidance is also provided on extracorporeal membrane oxygenation (ECMO), Left Ventricular Assist Devices (LVADs), and their management in patients requiring emergency surgery. The book will help surgical trainees recognize cases with the highest surgical risk and identify the most common complications at an early stage.

Download or read book Inverse Problems Design and Optimization vol 2 written by and published by Editora E-papers. This book was released on with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Science ICCS 2003 written by Peter M.A. Sloot and published by Springer. This book was released on 2003-08-03 with total page 1188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 2657, LNCS 2658, LNCS 2659, and LNCS 2660 constitutes the refereed proceedings of the Third International Conference on Computational Science, ICCS 2003, held concurrently in Melbourne, Australia and in St. Petersburg, Russia in June 2003. The four volumes present more than 460 reviewed contributed and invited papers and span the whole range of computational science, from foundational issues in computer science and algorithmic mathematics to advanced applications in virtually all application fields making use of computational techniques. These proceedings give a unique account of recent results in the field.

Download or read book Lindhe s Clinical Periodontology and Implant Dentistry written by Niklaus P. Lang and published by John Wiley & Sons. This book was released on 2021-07-28 with total page 1369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the latest edition of the cornerstone reference on periodontology and implant dentistry that combines scholarship and science with practical clinical instruction The Seventh Edition of Lindhe's Clinical Periodontology and Implant Dentistry brings together a distinguished team of periodontal specialists and academics who deliver another must-have resource for students, researchers, and practitioners specializing in periodontal care and implant dentistry. Seamlessly integrating the foundational science behind periodontology with practical clinical protocols in two comprehensive volumes, the chapters cover anatomy, microbiology, occlusion trauma, pathology, tissue regeneration, treatment planning protocols, infection control, reconstructive therapy, occlusal and prosthetic therapy, and more. The Seventh Edition of Lindhe's Clinical Periodontology and Implant Dentistry: Provides an introduction to anatomy, including periodontal tissues, the edentulous ridge, the mucosa at teeth and implants, and osseointegration Discusses the epidemiology of periodontal and peri-implant diseases Explores the microbiology, including dental biofilms and calculus, periodontal infections, peri-implant infections, the pathogenesis of gingivitis and periodontitis, and the genetic susceptibility to periodontal disease Includes the latest perio- and peri-implant disease classifications Contains updated evidence-based preventive and treatment modalities for the treatment of periodontal and peri-implant diseases Features the latest evidence-based therapeutic alternatives on the use of dental implants to rehabilitate the lost dentition Perfect for postgraduate dental students, researchers, and practitioners specializing in periodontal care and implant dentistry, Lindhe's Clinical Periodontology and Implant Dentistry continues to be the cornerstone reference work on periodontology.

Download or read book 3D Printing in Orthopaedic Surgery written by Matthew Dipaola and published by Elsevier Health Sciences. This book was released on 2018-11-20 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get a quick, expert overview of the role of emerging 3D printing technology in orthopaedic surgery, devices, and implants. This concise resource by Drs. Matthew DiPaola and Felasfa Wodajo provides orthopaedic surgeons and residents with need-to-know information on the clinical applications of 3D printing, including current technological capabilities, guidance for practice, and future outlooks for this fast-growing area. - Covers basic principles such as engineering aspects, software, economics, legal considerations, and applications for education and surgery planning. - Discusses 3D printing in arthroplasty, trauma and deformity, the adult and pediatric spine, oncology, and more. - Includes information on setting up a home 3D printing "plant" and 3D printing biologics. - Consolidates today's available information on this burgeoning topic into a single convenient resource

Download or read book Mandibular Reconstruction written by Arnold Komisar and published by Thieme. This book was released on 1997 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive atlas describing the surgical options for reconstructing the mandible.

Download or read book AI empowered cerebrocardiovascular health engineering written by Lisheng Xu and published by Frontiers Media SA. This book was released on 2024-01-02 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computer Assisted Planning in Craniofacial Surgery E Book written by Amir H Dorafshar and published by Elsevier Health Sciences. This book was released on 2023-11-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in both scanning instruments and supporting software have made intraoperative 3D imaging a reality in today's plastic and reconstructive surgery. Computer-Assisted Planning in Craniofacial Surgery provides authoritative, state-of-the-art information on when and how to apply technologies such as virtual planning, stereolithography, and navigation in the practice of craniofacial surgery. This unique, clinically focused title discusses the history and evolution of current techniques, extensively covers the application of current technologies, and includes multidisciplinary perspectives throughout, providing a comprehensive, holistic view of this important topic. - Follows a standard format in each chapter: history of the topic, current literature and applications, key steps and techniques of virtual planning and navigation (with video), and pearls/pitfalls shared by a master surgeon with expertise in each particular area. - Includes preoperative photographs and postoperative results, radiological and computerized imaging, and clinical photos throughout. - Covers potential complications to be aware of in the postoperative period. - Offers expert perspectives on computer-assisted planning from surgeons, physicists, engineers, and other industry leaders. - Additional digital ancillary content may publish up to 6 weeks following the publication date.