Download or read book Digest written by IEEE Antennas and Propagation Society. International Symposium and published by . This book was released on 2002 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stepped Frequency Radar Sensors written by Cam Nguyen and published by Springer. This book was released on 2016-03-29 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theory, analysis and design of microwave stepped-frequency radar sensors. Stepped-frequency radar sensors are attractive for various sensing applications that require fine resolution. The book consists of five chapters. The first chapter describes the fundamentals of radar sensors including applications followed by a review of ultra-wideband pulsed, frequency-modulated continuous-wave (FMCW), and stepped-frequency radar sensors. The second chapter discusses a general analysis of radar sensors including wave propagation in media and scattering on targets, as well as the radar equation. The third chapter addresses the analysis of stepped-frequency radar sensors including their principles and design parameters. Chapter 4 presents the development of two stepped-frequency radar sensors at microwave and millimeter-wave frequencies based on microwave integrated circuits (MICs), microwave monolithic integrated circuits (MMICs) and printed-circuit antennas, and discusses their signal processing. Chapter 5 provides the electrical characterization and test results of the developed microwave and millimeter-wave stepped-frequency radar sensors. Finally, a summary and conclusion is provided.
Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.
Download or read book Electronic Warfare and Radar Systems Engineering Handbook written by and published by . This book was released on 1997-04-01 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is designed to aid electronic warfare and radar systems engineers in making general estimations regarding capabilities of systems. It is not intended as a detailed designer's guide, due to space limitations. Portions of the handbook and future changes will be posted on an internet link.
Download or read book Intelligence Revolution 1960 written by Ingard Clausen and published by . This book was released on 2012 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview: Provides a history of the Corona Satellite photo reconnaissance Program. It was a joint Central Intelligence Agency and United States Air Force program in the 1960s. It was then highly classified.
Download or read book Automotive Mechatronics Operational and Practical Issues written by B. T. Fijalkowski and published by Springer Science & Business Media. This book was released on 2010-11-25 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents operational and practical issues of automotive mechatronics with special emphasis on the heterogeneous automotive vehicle systems approach, and is intended as a graduate text as well as a reference for scientists and engineers involved in the design of automotive mechatronic control systems. As the complexity of automotive vehicles increases, so does the dearth of high competence, multi-disciplined automotive scientists and engineers. This book provides a discussion into the type of mechatronic control systems found in modern vehicles and the skills required by automotive scientists and engineers working in this environment. Divided into two volumes and five parts, Automotive Mechatronics aims at improving automotive mechatronics education and emphasises the training of students’ experimental hands-on abilities, stimulating and promoting experience among high education institutes and produce more automotive mechatronics and automation engineers. The main subject that are treated are: VOLUME I: RBW or XBW unibody or chassis-motion mechatronic control hypersystems; DBW AWD propulsion mechatronic control systems; BBW AWB dispulsion mechatronic control systems; VOLUME II: SBW AWS diversion mechatronic control systems; ABW AWA suspension mechatronic control systems. This volume was developed for undergraduate and postgraduate students as well as for professionals involved in all disciplines related to the design or research and development of automotive vehicle dynamics, powertrains, brakes, steering, and shock absorbers (dampers). Basic knowledge of college mathematics, college physics, and knowledge of the functionality of automotive vehicle basic propulsion, dispulsion, conversion and suspension systems is required.
Download or read book System Design Modeling and Simulation written by Claudius Ptolemaeus and published by Lee & Seshia. This book was released on 2013-09-27 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive introduction to models of computation for the design of complex, heterogeneous systems. It has a particular focus on cyber-physical systems, which integrate computing, networking, and physical dynamics. The book captures more than twenty years of experience in the Ptolemy Project at UC Berkeley, which pioneered many design, modeling, and simulation techniques that are now in widespread use. All of the methods covered in the book are realized in the open source Ptolemy II modeling framework and are available for experimentation through links provided in the book. The book is suitable for engineers, scientists, researchers, and managers who wish to understand the rich possibilities offered by modern modeling techniques. The goal of the book is to equip the reader with a breadth of experience that will help in understanding the role that such techniques can play in design.
Download or read book Department of Defense Dictionary of Military and Associated Terms written by United States. Joint Chiefs of Staff and published by . This book was released on 1979 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The GOES R Series written by Steven J. Goodman and published by Elsevier. This book was released on 2019-10-05 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The GOES-R Series: A New Generation of Geostationary Environmental Satellites introduces the reader to the most significant advance in weather technology in a generation. The world's new constellation of geostationary operational environmental satellites (GOES) are in the midst of a drastic revolution with their greatly improved capabilities that provide orders of magnitude improvements in spatial, temporal and spectral resolution. Never before have routine observations been possible over such a wide area. Imagine satellite images over the full disk every 10 or 15 minutes and monitoring of severe storms, cyclones, fires and volcanic eruptions on the scale of minutes. - Introduces the GOES-R Series, with chapters on each of its new products - Provides an overview of how to read new satellite images - Includes full-color images and online animations that demonstrate the power of this new technology
Download or read book Fundamentals of Radar Signal Processing written by Mark A. Richards and published by McGraw Hill Professional. This book was released on 2005-07-15 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in DSP (digital signal processing) have radically altered the design and usage of radar systems -- making it essential for both working engineers as well as students to master DSP techniques. This text, which evolved from the author's own teaching, offers a rigorous, in-depth introduction to today's complex radar DSP technologies. Contents: Introduction to Radar Systems * Signal Models * Sampling and Quantization of Pulsed Radar Signals * Radar Waveforms * Pulse Compression Waveforms * Doppler Processing * Detection Fundamentals * Constant False Alarm Rate (CFAR) Detection * Introduction to Synthetic Aperture Imaging
Download or read book Smart Transport for Cities and Nations written by Christian Claudel and published by . This book was released on 2018-06-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Smart Sensors written by Randy Frank and published by Artech House Publishers. This book was released on 1996 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Two of the most important trends in sensor development in recent years have been advances in micromachined sensing elements of all kinds, and the increase in intelligence applied at the sensor level. This book addresses both, and provides a good overview of current technology". -- I&CS
Download or read book The Art of Sound Reproduction written by John Watkinson and published by Taylor & Francis. This book was released on 2012-11-12 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to make life a little easier by providing all the theoretical background necessary to understand sound reproduction, backed up with practical examples. Specialist terms - both musical and physical - are defined as they occur and plain English is used throughout. Analog and digital audio are considered as alternatives, and the advantages of both are stressed. Audio is only as good as the transducers employed, and consequently microphone and loudspeaker technology also feature heavily - making this the most comprehensive, up-to-date text currently available on all aspects of sound reproduction.
Download or read book RFID Handbook written by Klaus Finkenzeller and published by John Wiley & Sons. This book was released on 2010-11-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third revised edition of the established and trusted RFID Handbook; the most comprehensive introduction to radio frequency identification (RFID) available. This essential new edition contains information on electronic product code (EPC) and the EPC global network, and explains near-field communication (NFC) in depth. It includes revisions on chapters devoted to the physical principles of RFID systems and microprocessors, and supplies up-to-date details on relevant standards and regulations. Taking into account critical modern concerns, this handbook provides the latest information on: the use of RFID in ticketing and electronic passports; the security of RFID systems, explaining attacks on RFID systems and other security matters, such as transponder emulation and cloning, defence using cryptographic methods, and electronic article surveillance; frequency ranges and radio licensing regulations. The text explores schematic circuits of simple transponders and readers, and includes new material on active and passive transponders, ISO/IEC 18000 family, ISO/IEC 15691 and 15692. It also describes the technical limits of RFID systems. A unique resource offering a complete overview of the large and varied world of RFID, Klaus Finkenzeller’s volume is useful for end-users of the technology as well as practitioners in auto ID and IT designers of RFID products. Computer and electronics engineers in security system development, microchip designers, and materials handling specialists benefit from this book, as do automation, industrial and transport engineers. Clear and thorough explanations also make this an excellent introduction to the topic for graduate level students in electronics and industrial engineering design. Klaus Finkenzeller was awarded the Fraunhofer-Smart Card Prize 2008 for the second edition of this publication, which was celebrated for being an outstanding contribution to the smart card field.
Download or read book Data Acquisition Systems written by Maurizio Di Paolo Emilio and published by Springer Science & Business Media. This book was released on 2013-03-21 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of data acquisition systems, how they enable users to sample signals that measure real physical conditions and convert the resulting samples into digital, numeric values that can be analyzed by a computer. The author takes a problem-solving approach to data acquisition, providing the tools engineers need to use the concepts introduced. Coverage includes sensors that convert physical parameters to electrical signals, signal conditioning circuitry to convert sensor signals into a form that can be converted to digital values and analog-to-digital converters, which convert conditioned sensor signals to digital values. Readers will benefit from the hands-on approach, culminating with data acquisition projects, including hardware and software needed to build data acquisition systems.
Download or read book The Handbook of Logistics and Distribution Management written by Alan Rushton and published by Kogan Page Publishers. This book was released on 2000 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for students, young managers and seasoned practitioners alike, this handbook explains the nuts and bolts of the modern logistics and distribution world in plain language. Illustrated throughout, this second edition includes new chapters on areas previously not covered, such as: intermodal transport; benchmarking; environmental matters; and vehicle and depot security.
Download or read book Digital System Design written by Dawoud Shenouda Dawoud and published by River Publishers. This book was released on 2010-04-10 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, embedded systems are widely deployed in just about every piece of machinery from toasters to spacecrafts, and embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but, more importantly, to satisfy numerous other constraints. To achieve these current goals, the designer must be aware of such design constraints and, more importantly, the factors that have a direct effect on them. One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand: single-purpose, general-purpose, or application specific. Microcontrollers are one member of the family of the application specific processors. Digital System Design concentrates on the use of a microcontroller as the embedded system's processor and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontrollers and is ideal for undergraduate students and engineers that are working in the field of digital system design.
