Download or read book The Designer s Guide to Jitter in Ring Oscillators written by John A. McNeill and published by Springer Science & Business Media. This book was released on 2009-04-09 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide emphasizes jitter for time domain applications so that there is not a need to translate from frequency domain. This provides a more direct path to the results for designing in an application area where performance is specified in the time domain. The book includes classification of oscillator types and an exhaustive guide to existing research literature. It also includes classification of measurement techniques to help designers understand how the eventual performance of circuit design is verified.

Download or read book Microelectronics Electromagnetics and Telecommunications written by Ganapati Panda and published by Springer. This book was released on 2018-11-02 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the latest developments and outlines future trends in the fields of microelectronics, electromagnetics and telecommunication. It contains original research works presented at the International Conference on Microelectronics, Electromagnetics and Telecommunication (ICMEET 2018), organised by GVP College of Engineering (A), Andhra Pradesh, India. The respective papers were written by scientists, research scholars and practitioners from leading universities, engineering colleges and R&D institutes from all over the world, and share the latest breakthroughs in and promising solutions to the most important issues facing today’s society.

Download or read book Design of High Performance CMOS Voltage Controlled Oscillators written by Liang Dai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of High-Performance CMOS Voltage-Controlled Oscillators presents a phase noise modeling framework for CMOS ring oscillators. The analysis considers both linear and nonlinear operation. It indicates that fast rail-to-rail switching has to be achieved to minimize phase noise. Additionally, in conventional design the flicker noise in the bias circuit can potentially dominate the phase noise at low offset frequencies. Therefore, for narrow bandwidth PLLs, noise up conversion for the bias circuits should be minimized. We define the effective Q factor (Qeff) for ring oscillators and predict its increase for CMOS processes with smaller feature sizes. Our phase noise analysis is validated via simulation and measurement results. The digital switching noise coupled through the power supply and substrate is usually the dominant source of clock jitter. Improving the supply and substrate noise immunity of a PLL is a challenging job in hostile environments such as a microprocessor chip where millions of digital gates are present.

Download or read book Ultra Low Voltage Frequency Synthesizer and Successive Approximation Analog to Digital Converter for Biomedical Applications written by Chung-Chih Hung and published by Springer Nature. This book was released on 2021-12-07 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the origin of biomedical signals and the operating principles behind them and introduces the characteristics of common biomedical signals for subsequent signal measurement and judgment. Since biomedical signals are captured by wearable devices, sensor devices, or implanted devices, these devices are all battery-powered to maintain long working time. We hope to reduce their power consumption to extend service life, especially for implantable devices, because battery replacement can only be done through surgery. Therefore, we must understand how to design low-power integrated circuits. Both implantable and in-vitro medical signal detectors require two basic components to collect and transmit biomedical signals: an analog-to-digital converter and a frequency synthesizer because these measured biomedical signals are wirelessly transmitted to the relevant receiving unit. The core unit of wireless transmission is the frequency synthesizer, which provides a wide frequency range and stable frequency to demonstrate the quality and performance of the wireless transmitter. Therefore, the basic operating principle and model of the frequency synthesizer are introduced. We also show design examples and measurement results of a low-power low-voltage integer-N frequency synthesizer for biomedical applications. The detection of biomedical signals needs to be converted into digital signals by an analog-to-digital converter to facilitate subsequent signal processing and recognition. Therefore, the operating principle of the analog-to-digital converter is introduced. We also show implementation examples and measurement results of low-power low-voltage analog-to-digital converters for biomedical applications.

Download or read book Analysis and Design of CMOS Clocking Circuits For Low Phase Noise written by Woorham Bae and published by Institution of Engineering and Technology. This book was released on 2020-06-24 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: As electronics continue to become faster, smaller and more efficient, development and research around clocking signals and circuits has accelerated to keep pace. This book bridges the gap between the classical theory of clocking circuits and recent technological advances, making it a useful guide for newcomers to the field, and offering an opportunity for established researchers to broaden and update their knowledge of current trends.

Download or read book The Design of Low Noise Oscillators written by Ali Hajimiri and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is hardly a revelation to note that wireless and mobile communications have grown tremendously during the last few years. This growth has placed stringent requi- ments on channel spacing and, by implication, on the phase noise of oscillators. C- pounding the challenge has been a recent drive toward implementations of transceivers in CMOS, whose inferior 1/f noise performance has usually been thought to disqualify it from use in all but the lowest-performance oscillators. Low noise oscillators are also highly desired in the digital world, of course. The c- tinued drive toward higher clock frequencies translates into a demand for ev- decreasing jitter. Clearly, there is a need for a deep understanding of the fundamental mechanisms g- erning the process by which device, substrate, and supply noise turn into jitter and phase noise. Existing models generally offer only qualitative insights, however, and it has not always been clear why they are not quantitatively correct.

Download or read book CMOS PLL Synthesizers Analysis and Design written by Keliu Shu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to the advance of semiconductor and communication technology, the wireless communication market has been booming in the last two decades. It evolved from simple pagers to emerging third-generation (3G) cellular phones. In the meanwhile, broadband communication market has also gained a rapid growth. As the market always demands hi- performance and low-cost products, circuit designers are seeking hi- integration communication devices in cheap CMOS technology. The phase-locked loop frequency synthesizer is a critical component in communication devices. It works as a local oscillator for frequency translation and channel selection in wireless transceivers and broadband cable tuners. It also plays an important role as the clock synthesizer for data converters in the analog-and-digital signal interface. This book covers the design and analysis of PLL synthesizers. It includes both fundamentals and a review of the state-of-the-art techniques. The transient analysis of the third-order charge-pump PLL reveals its locking behavior accurately. The behavioral-level simulation of PLL further clarifies its stability limit. Design examples are given to clearly illustrate the design procedure of PLL synthesizers. A complete derivation of reference spurs in the charge-pump PLL is also presented in this book. The in-depth investigation of the digital CA modulator for fractional-N synthesizers provides insightful design guidelines for this important block.

Download or read book Nanoscale VLSI written by Rohit Dhiman and published by Springer Nature. This book was released on 2020-10-03 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes methodologies in the design of VLSI devices, circuits and their applications at nanoscale levels. The book begins with the discussion on the dominant role of power dissipation in highly scaled devices.The 15 Chapters of the book are classified under four sections that cover design, modeling, and simulation of electronic, magnetic and compound semiconductors for their applications in VLSI devices, circuits, and systems. This comprehensive volume eloquently presents the design methodologies for ultra–low power VLSI design, potential post–CMOS devices, and their applications from the architectural and system perspectives. The book shall serve as an invaluable reference book for the graduate students, Ph.D./ M.S./ M.Tech. Scholars, researchers, and practicing engineers working in the frontier areas of nanoscale VLSI design.

Download or read book Analog Circuit Design written by Willy M.C. Sansen and published by Springer Science & Business Media. This book was released on 1999-10-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of Analog Circuit Design concentrates on three topics: (X)DSL and other communication systems; RF MOST models; and integrated filters and oscillators. The book comprises five chapters on the first topic with six each on the other two, all written by internationally recognized experts. They are tutorial in nature and together make a substantial contribution to improving the design of analog circuits. The book is divided into three parts: Part I: (X)DSL and other Communication Systems presents some examples of recent improved modem techniques which have resulted in much higher transmission speeds over the local telephone network. It also presents components for the implementation of different standards. Part II: RF MOST Models investigates the state of the art in RF MOST models. It compares the existing BSIM3v3, Philips' Model 9 and the EKV model with respect to their capability to accurately predict GHz performance with submicron CMOST technologies. It shows how it has now become quite feasible to model a MOST at very high frequencies, giving rise to an increased use of MOST technologies in RF applications. Part III: Integrated Filters and Oscillators illustrates how the increasing use of communication tools goes hand-in-hand with the design of analog filters and oscillators with greater flexibility and higher bandwidth.

Download or read book Low Voltage CMOS RF Frequency Synthesizers written by Howard Cam Luong and published by Cambridge University Press. This book was released on 2004-08-26 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: A frequency synthesizer is one of the most critical building blocks in any wireless transceiver system. Its design is getting more and more challenging as the demand for low-voltage low-power high-frequency wireless systems continuously grows. As the supply voltage is decreased, many existing design techniques are no longer applicable. This book provides the reader with architectures and design techniques to enable CMOS frequency synthesizers to operate at low supply voltage at high frequency with good phase noise and low power consumption. In addition to updating the reader on many of these techniques in depth, this book will also introduce useful guidelines and step-by-step procedure on behaviour simulations of frequency synthesizers. Finally, three successfully demonstrated CMOS synthesizer prototypes with detailed design consideration and description will be elaborated to illustrate potential applications of the architectures and design techniques described. For engineers, managers and researchers working in radio-frequency integrated-circuit design for wireless applications.

Download or read book CMOS Active Inductors and Transformers written by Fei Yuan and published by Springer Science & Business Media. This book was released on 2008-06-17 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many new topologies and circuit design techniques have emerged recently to improve the performance of active inductors, but a comprehensive treatment of the theory, topology, characteristics, and design constraint of CMOS active inductors and transformers, and a detailed examination of their emerging applications in high-speed analog signal processing and data communications over wire and wireless channels, is not available. This book is an attempt to provide an in-depth examination and a systematic presentation of the operation principles and implementation details of CMOS active inductors and transformers, and a detailed examination of their emerging applications in high-speed analog signal processing and data communications over wire and wireless channels. The content of the book is drawn from recently published research papers and are not available in a single, cohesive book. Equal emphasis is given to the theory of CMOS active inductors and transformers, and their emerging applications. Major subjects to be covered in the book include: inductive characteristics in high-speed analog signal processing and data communications, spiral inductors and transformers – modeling and limitations, a historical perspective of device synthesis, the topology, characterization, and implementation of CMOS active inductors and transformers, and the application of CMOS active inductors and transformers in high-speed analog and digital signal processing and data communications.

Download or read book Proceedings of the Multi Conference 2011 written by Himanshu B. Soni and published by Universal-Publishers. This book was released on 2011-06-06 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Signals, Systems and Automation (ICSSA 2011) aims to spread awareness in the research and academic community regarding cutting-edge technological advancements revolutionizing the world. The main emphasis of this conference is on dissemination of information, experience, and research results on the current topics of interest through in-depth discussions and participation of researchers from all over the world. The objective is to provide a platform to scientists, research scholars, and industrialists for interacting and exchanging ideas in a number of research areas. This will facilitate communication among researchers in different fields of Electronics and Communication Engineering. The International Conference on Intelligent System and Data Processing (ICISD 2011) is organized to address various issues that will foster the creation of intelligent solutions in the future. The primary goal of the conference is to bring together worldwide leading researchers, developers, practitioners, and educators interested in advancing the state of the art in computational intelligence and data processing for exchanging knowledge that encompasses a broad range of disciplines among various distinct communities. Another goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working in India and abroad.

Download or read book Proceedings written by and published by . This book was released on 2004 with total page 1306 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Design of Modern Microwave Oscillators for Wireless Applications written by Ulrich L. Rohde and published by John Wiley & Sons. This book was released on 2005-05-27 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Delivering the best possible solution for phase noise and outputpower efficiency in oscillators This complete and thorough analysis of microwave oscillatorsinvestigates all aspects of design, with particular emphasis onoperating conditions, choice of resonators and transistors, phasenoise, and output power. It covers both bipolar transistors andFETs. Following the authors' guidance, readers learn how to designmicrowave oscillators and VCOs that can be tuned over a very widefrequency range, yet have good phase noise, are low cost, and aresmall in size. All the essential topics in oscillator design anddevelopment are covered, including: * Device and resonator technology * Study of noise sources * Analysis methods * Design, calculation, and optimization methodologies * Practical design of single and coupled oscillators While most of the current literature in the field concentrates onclassic design strategies based on measurements, simulation, andoptimization of output power and phase noise, this text offers aunique approach that focuses on the complete understanding of thedesign process. The material demonstrates important design rulesstarting with the selection of best oscillator topology, choice oftransistors, and complete phase noise analysis that leads tooptimum performance of all relevant oscillator features. Alsoincluded are CMOS oscillators, which recently have become importantin cellular applications. For readers interested in specializedapplications and topics, a full chapter provides all the necessaryreferences. The contents of the text fall into two major categories: * Chapters 1 through 9 deal with a very detailed and expandedsingle resonator oscillator, including a thorough treatment of bothnonlinear analysis and phase noise * Chapters 10 and 11 use the knowledge obtained and apply it tomultiple coupled oscillators (synchronized oscillators) This text is partially based on research sponsored by the DefenseAdvanced Research Projects Agency (DARPA) and the United StatesArmy and conducted by Synergy Microwave Corporation. With thewealth of information provided for the analysis and practicaldesign of single and synchronized low-noise microwave oscillators,it is recommended reading for all RF microwave engineers. Inaddition, the text's comprehensive, step-by-step approach makes itan excellent graduate-level textbook.

Download or read book Design of Analog Circuits Through Symbolic Analysis written by Mourad Fakhfakh and published by Bentham Science Publishers. This book was released on 2012-08-13 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Symbolic analyzers have the potential to offer knowledge to sophomores as well as practitioners of analog circuit design. Actually, they are an essential complement to numerical simulators, since they provide insight into circuit behavior which numerical "

Download or read book Wireless Radio Frequency Standards and System Design Advanced Techniques written by Cornetta, Gianluca and published by IGI Global. This book was released on 2012-01-31 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-frequency (RF) integrated circuits in CMOS technology are gaining increasing popularity in the commercial world, and CMOS technology has become the dominant technology for applications such as GPS receivers, GSM cellular transceivers, wireless LAN, and wireless short-range personal area networks based on IEEE 802.15.1 (Bluetooth) or IEEE 802.15.4 (ZigBee) standards. Furthermore, the increasing interest in wireless technologies and the widespread of wireless communications has prompted an ever increasing demand for radio frequency transceivers. Wireless Radio-Frequency Standards and System Design: Advanced Techniques provides perspectives on radio-frequency circuit and systems design, covering recent topics and developments in the RF area. Exploring topics such as LNA linearization, behavioral modeling and co-simulation of analog and mixed-signal complex blocks for RF applications, integrated passive devices for RF-ICs and baseband design techniques and wireless standards, this is a comprehensive reference for students as well as practicing professionals.

Download or read book Sinusoidal Oscillators and Waveform Generators using Modern Electronic Circuit Building Blocks written by Raj Senani and published by Springer. This book was released on 2015-11-26 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a single-source reference to sinusoidal oscillators and waveform generators, using classical as well as a variety of modern electronic circuit building blocks. It provides a state-of-the-art review of a large variety of sinusoidal oscillators and waveform generators and includes a catalogue of over 600 configurations of oscillators and waveform generators, describing their relevant design details and salient performance features/limitations. The authors discuss a number of interesting, open research problems and include a comprehensive collection of over 1500 references on oscillators and non-sinusoidal waveform generators/relaxation oscillators. Offers readers a single-source reference to everything connected to sinusoidal oscillators and waveform generators, using classical as well as modern electronic circuit building blocks; Provides a state-of-the-art review of a large variety of sinusoidal oscillators and waveform generators; Includes a catalog of over 600 configurations of oscillators and waveform generators, with their relevant design details and their salient performance features/limitations.