Download or read book Design and Analysis of Centrifugal Compressors written by Rene Van den Braembussche and published by John Wiley & Sons. This book was released on 2019-01-14 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of fluid dynamic models and experimental results that can help solve problems in centrifugal compressors and modern techniques for a more efficient aerodynamic design. Design and Analysis of Centrifugal Compressors isacomprehensive overview of the theoretical fluid dynamic models describing the flow in centrifugal compressors and the modern techniques for the design of more efficient centrifugal compressors. The author — a noted expert in the field, with over 40 years of experience — evaluates relevant numerical and analytical prediction models for centrifugal compressors with special attention to their accuracy and limitations. Relevant knowledge from the last century is linked with new insights obtained from modern CFD. Emphasis is to link the flow structure, performance and stability to the geometry of the different compressor components. Design and Analysis of Centrifugal Compressors is an accessible resource that combines theory with experimental data and previous research with recent developments in computational design and optimization. This important resource Covers the basic information concerning fluid dynamics that are specific for centrifugal compressors and clarifies the differences with axial compressors Provides an overview of performance prediction models previously developed in combination with extra results from research conducted by the author Describes helpful numerical and analytical models for the flow in the different components in relation to flow stability, operating range and performance Includes the fundamental information for the aerodynamic design of more efficient centrifugal compressors Explains the use of computational fluid dynamics (CFD) for the design and analysis of centrifugal compressors Written for engineers, researchers and designers in industry as well as for academics specializing in the field, Design and Analysis of Centrifugal Compressors offers an up to date overview of the information needed for the design of more effective centrifugal compressors.

Download or read book Centrifugal Compressors written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mechanical engineer with a Pennsylvania turbomachinery company, A ungier describes his own system and strategy for designing and analyzing centrifugal compressor aerodynamics. To address the novice as well as the experienced in the field, he presents the basic thermodynamic and fluid dynamic principles, empirical models, and key numerical methods that form the basis of his methods. His strategy, or design practice, he found harder to describe because it involves a process of reasoning rather than following an established set of principles. He recognizes that his is only one of many possible methods, but makes no effort to compare or contrast his with any other.

Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.

Download or read book Design and Flow Analysis of Volutes for Centrifugal Compressors written by Fahua Gu and published by . This book was released on 2000 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Process Centrifugal Compressors written by Klaus H. Lüdtke and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originating in the process compressor industry, this text primarily addresses: rotating equipment engineers, project engineers, engineering contractors, and compressor user companies in oil and gas field operations, natural gas processing, petroleum refining, petrochemical processing, industrial refrigeration, and chemical industries. It enables the reader to assess compressors and defines the constraints influencing the compressor design.

Download or read book Radial Flow Turbocompressors written by Michael Casey and published by Cambridge University Press. This book was released on 2021-06-10 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the theory and engineering practice that underpins the component design and analysis of radial flow turbocompressors. Drawing upon an extensive theoretical background and years of practical experience, the authors provide descriptions of applications, concepts, component design, analysis tools, performance maps, flow stability, and structural integrity, with illustrative examples. Features wide coverage of all types of radial compressor over many applications unified by the consistent use of dimensional analysis. Discusses the methods needed to analyse the performance, flow, and mechanical integrity that underpin the design of efficient centrifugal compressors with good flow range and stability. Includes explanation of the design of all radial compressor components, including inlet guide vanes, impellers, diffusers, volutes, return channels, de-swirl vanes and side-streams. Suitable as a reference for advanced students of turbomachinery, and a perfect tool for practising mechanical and aerospace engineers already within the field and those just entering it.

Download or read book Centrifugal Compressors Design Analysis written by Mohammad H. Danesh and published by . This book was released on 1982 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Axial flow Compressors written by Ronald H. Aungier and published by American Society of Mechanical Engineers. This book was released on 2003 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough description of an aerodynamic design and analysis systems for Axial-Flow Compressors. It describes the basic fluid dynamic and thermodynamic principles, empirical models and numerical methods used for the full range of procedures and analytical tools that an engineer needs for virtually any tupe of Axial-Flow Compressor, aerodynamic design or analysis activity. It reviews and evaluates several design strategies that have been recommended in the literature or which have been found to be effective. It gives a complete description of an actual working system, such that readers can implement all or part of the system. Engineers responsible for developing, maintaining of improving design and analysis systems can benefit greatly from this type of reference. The technology has become so complex and the role of computers so pervasive that about the only way this can be done today is to concentrate on a specific design and analysis system. The author provides practical methodology as well as the details needed to implement the suggested procedures.

Download or read book Compressor Performance written by Theodore Gresh and published by Newnes. This book was released on 2001-05-17 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compressor Performance is a reference book and CD-ROM for compressor design engineers and compressor maintenance engineers, as well as engineering students. The book covers the full spectrum of information needed for an individual to select, operate, test and maintain axial or centrifugal compressors. It includes basic aerodynamic theory to provide the user with the "how's" and "why's" of compressor design. Maintenance engineers will especially appreciate the troubleshooting guidelines offered. Includes many example problems and reference data such as gas properties and flow meter calculations to enable easy analysis of compressor performance in practice. Includes companion CD with computer programs.M. Theodore Gresh has been with the Elliot Company in Jeannette, Pennsylvania, since 1975, initially working on the mechanical and aerodynamic design and application of centrifugal compressors.Unrivalled coverage of the theory and practical use of all kinds of compressors in industrial use from an industry-leading company sourceComplete subject reference and learning resource in one stop, suitable for newly graduated engineers and experienced professional reference useIncludes companion CD-ROM

Download or read book Design and Off design Analysis of a Highly Loaded Centrifugal Compressor for SCO2 Applications Operating in Near critical Conditions written by Alessandro Romei and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Compressors written by Royce N. Brown and published by Elsevier. This book was released on 2011-08-30 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides in-depth information required to understand and properly estimate compressor capabilities and to select the proper designs. Engineers and students will gain a thorough understanding of compression principles, equipment, applications, selection, sizing, installation, and maintenance. The many examples clearly illustrate key aspects to help readers understand the "real world" of compressor technology.Compressors: Selection and Sizing, third edition is completely updated with new API standards. Additions requested by readers include a new section on diaphragm compressors in the reciprocating compressors chapter, and a new section on rotor dynamics stability in the chapter on diaphragm compressors.The latest technology is presented in the areas of efficiency, 3-D geometry, electronics, CAD, and the use of plant computers. The critical chapter on negotiating the purchase of a compressor now reflects current industry practices for preparing detailed specifications, bid evaluations, engineering reviews, and installation. A key chapter compares the reliability of various types of compressors.*Everything you need to select the right compressor for your specific application.*Practical information on compression principles, equipment, applications, selection, sizing, installation, and maintenance.*New sections on diaphragm compressors and an introduction to rotor dynamics stability.

Download or read book Design of Radial Turbomachines written by A. Whitfield and published by Longman. This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past three decades advances have been made in the fluid dynamic and thermodynamic design and understanding of radial flow turbomachines. Radial turbomachines possess their own distinctive characteristics, and present the engineer with as full a range of complexities as any fluid flow problem. This book describes the current technology and design methods for centrifugal compressors and radial turbines working in compressible flow. These are of particular relevance to gas turbine engines, internal combustion engine turbochargers, process compressors and cryogenic expanders. The aerodynamic design of the turbomachine is preliminary design to the specification of blade forms and computational fluid dynamic analysis of vane and blade passage flows. The treatment throughout is modern, with full recognition of current computer-aided design methods. However throughout the book a clear separation is made between the fundamental gas dynamics and the empiricism necessary to close the gap between theory and practice in situations of such complexity. Computer program listings for preliminary design are included. The problems posed by specific applications are dealt with in details: for example, techniques for the suppression of surge in centrifugal compressors and a consequent widening of the operating range, and the problems of pulse operation of radial turbines as encountered in turbocharger applications. The book contains comprehensive surveys of the literature in all these fields.

Download or read book The Design and Analysis of Pipe Diffusers for Centrifugal Compressors written by Ian Bennett and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Blade Design and Analysis for Steam Turbines written by Murari P. Singh and published by McGraw Hill Professional. This book was released on 2011-03-22 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE LATEST STEAM TURBINE BLADE DESIGN AND ANALYTICAL TECHNIQUES Blade Design and Analysis for Steam Turbines provides a concise reference for practicing engineers involved in the design, specification, and evaluation of industrial steam turbines, particularly critical process compressor drivers. A unified view of blade design concepts and techniques is presented. The book covers advances in modal analysis, fatigue and creep analysis, and aerodynamic theories, along with an overview of commonly used materials and manufacturing processes. This authoritative guide will aid in the design of powerful, efficient, and reliable turbines. COVERAGE INCLUDES: Performance fundamentals and blade loading determination Turbine blade construction, materials, and manufacture System of stress and damage mechanisms Fundamentals of vibration Damping concepts applicable to turbine blades Bladed disk systems Reliability evaluation for blade design Blade life assessment aspects Estimation of risk

Download or read book Control of Surge in Centrifugal Compressors by Active Magnetic Bearings written by Se Young Yoon and published by Springer Science & Business Media. This book was released on 2012-06-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surge Control of Active-magnetic-bearing-suspended Centrifugal Compressors sets out the fundamentals of integrating active magnetic bearing (AMB) rotor suspension technology in compressor systems, and describes how this relatively new bearing technology can be employed in active control of compressor surge initiation. The authors provide a self-contained and comprehensive review of rotordynamics and the fundamentals of AMB technology. The active stabilization of compressor surge employing AMBs in a machine is fully explored, from modeling of instability and controller design, to the implementation and experimental testing of the control algorithm in a specially-constructed, industrial-size centrifugal compression system. The results of these tests demonstrate the great potential of the new surge control method suggested in this text. This book will be useful for engineers in industries that involve turbocompressors and magnetic bearings, as well as for researchers and graduate students in the field of applied control. Whatever their level of experience, engineers working in the fields of turbomachinery, magnetic bearings, rotordynamics and controls will find the material in this book absorbing as all these important aspects of engineering are integrated to create a multi-disciplinary solution to a real-life industrial problem and the book is a suitable introduction to the area for newcomers.

Download or read book 14th International Conference on Turbochargers and Turbocharging written by Institution of Mechanical Engineers and published by CRC Press. This book was released on 2020-09-30 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: 14th International Conference on Turbochargers and Turbocharging addresses current and novel turbocharging system choices and components with a renewed emphasis to address the challenges posed by emission regulations and market trends. The contributions focus on the development of air management solutions and waste heat recovery ideas to support thermal propulsion systems leading to high thermal efficiency and low exhaust emissions. These can be in the form of internal combustion engines or other propulsion technologies (eg. Fuel cell) in both direct drive and hybridised configuration. 14th International Conference on Turbochargers and Turbocharging also provides a particular focus on turbochargers, superchargers, waste heat recovery turbines and related air managements components in both electrical and mechanical forms.

Download or read book Development of a Design and Performance Analysis Tool for a Family of Centrifugal Compressor Volutes written by Guy Phuong and published by . This book was released on 2003 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: