Download or read book Iter Physics written by C Wendell Horton, Jr and published by World Scientific. This book was released on 2015-06-25 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The promise of a vast and clean source of thermal power drove physics research for over fifty years and has finally come to collimation with the international consortium led by the European Union and Japan, with an agreement from seven countries to build a definitive test of fusion power in ITER. It happened because scientists since the Manhattan project have envisioned controlled nuclear fusion in obtaining energy with no carbon dioxide emissions and no toxic nuclear waste products.This large toroidal magnetic confinement ITER machine is described from confinement process to advanced physics of plasma-wall interactions, where pulses erupt from core plasma blistering the machine walls. Emissions from the walls reduce the core temperature which must remain ten times hotter than the 15 million degree core solar temperature to maintain ITER fusion power. The huge temperature gradient from core to wall that drives intense plasma turbulence is described in detail.Also explained are the methods designed to limit the growth of small magnetic islands, the growth of edge localized plasma plumes and the solid state physics limits of the stainless steel walls of the confinement vessel from the burning plasma. Designs of the wall coatings and the special 'exhaust pipe' for spent hot plasma are provided in two chapters. And the issues associated with high-energy neutrons — about 10 times higher than in fission reactions — and how they are managed in ITER, are detailed.

Download or read book Tokamaks written by John Wesson and published by Oxford University Press. This book was released on 2011-10-13 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tokamak is the principal tool in controlled fusion research. This book acts as an introduction to the subject and a basic reference for theory, definitions, equations, and experimental results. The fourth edition has been completely revised, describing their development of tokamaks to the point of producing significant fusion power.

Download or read book Fusion Science and Technology written by and published by . This book was released on 2007 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Magnetic Fusion Energy written by George Neilson and published by Woodhead Publishing. This book was released on 2016-06-02 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Energy: From Experiments to Power Plants is a timely exploration of the field, giving readers an understanding of the experiments that brought us to the threshold of the ITER era, as well as the physics and technology research needed to take us beyond ITER to commercial fusion power plants. With the start of ITER construction, the world's magnetic fusion energy (MFE) enterprise has begun a new era. The ITER scientific and technical (S&T) basis is the result of research on many fusion plasma physics experiments over a period of decades. Besides ITER, the scope of fusion research must be broadened to create the S&T basis for practical fusion power plants, systems that will continuously convert the energy released from a burning plasma to usable electricity, operating for years with only occasional interruptions for scheduled maintenance. - Provides researchers in academia and industry with an authoritative overview of the significant fusion energy experiments - Considers the pathway towards future development of magnetic fusion energy power plants - Contains experts contributions from editors and others who are well known in the field

Download or read book Nuclear Fusion written by and published by . This book was released on 2006-12 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics Briefs written by and published by . This book was released on 1993 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fusion Technology written by and published by . This book was released on 2000 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Plasma Boundary of Magnetic Fusion Devices written by P.C Stangeby and published by CRC Press. This book was released on 2000-01-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Plasma Boundary of Magnetic Fusion Devices introduces the physics of the plasma boundary region, including plasma-surface interactions, with an emphasis on those occurring in magnetically confined fusion plasmas. The book covers plasma-surface interaction, Debye sheaths, sputtering, scrape-off layers, plasma impurities, recycling and control, 1D and 2D fluid and kinetic modeling of particle transport, plasma properties at the edge, diverter and limiter physics, and control of the plasma boundary. Divided into three parts, the book begins with Part 1, an introduction to the plasma boundary. The derivations are heuristic and worked problems help crystallize physical intuition, which is emphasized throughout. Part 2 provides an introduction to methods of modeling the plasma edge region and for interpreting computer code results. Part 3 presents a collection of essays on currently active research hot topics. With an extensive bibliography and index, this book is an invaluable first port-of-call for researchers interested in plasma-surface interactions.

Download or read book Applied Computational Geometry Towards Geometric Engineering written by Ming C. Lin and published by Springer. This book was released on 1996-09-25 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This anthology is based on the First ACM Workshop on Applied Computational Geometry, WACG '96, held in Philadelphia, PA, USA, in May 1996, as part of the FCRC Conference. Today, CG is in transition and applied computational geometry has established itself as a fertile meeting ground for theorists from core computational geometry and practitioners from the potential application areas to exchange their ideas and identify issues of common interest. The book presents 11 invited contributions and state-of-the-art reports by leading experts together with 12 refereed full papers selected from 32 submissions. It points the way towards geometrical engineering and addresses researchers and professionals sharing an interest in geometric algorithms and techniques and their use in computational sciences and engineering.

Download or read book Plasma Science written by National Academies of Sciences Engineering and Medicine and published by . This book was released on 2021-02-28 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma Science and Engineering transforms fundamental scientific research into powerful societal applications, from materials processing and healthcare to forecasting space weather. Plasma Science: Enabling Technology, Sustainability, Security and Exploration discusses the importance of plasma research, identifies important grand challenges for the next decade, and makes recommendations on funding and workforce. This publication will help federal agencies, policymakers, and academic leadership understand the importance of plasma research and make informed decisions about plasma science funding, workforce, and research directions.

Download or read book Reviews of Plasma Physics written by Vitaly D. Shafranov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews of Plasma Physics, Volume 23, presents two high quality reviews from the cutting-edge of Russian plasma physics research: "Plasma Models of Atom and Radiative-Collisional Processes", by V.A. Astapenko, L.A. Bureyeva, V.S. Lisitsa, is devoted to a unified description of the atomic core polarization effects in the free-free, free-bound and bound-bound transitions of the charged particles in the field of multielectron atom. "Asymptotic Theory of Charge Exchange And Mobility Processes for Atomic Ions" by B.M. Smirnov reviews the process of resonant charge exchange, and also the transport processes (mobility and diffusion coefficients) for ions in parent gases which are determined by resonant electron transfer.

Download or read book On the Edge of Magnetic Fusion Devices written by Sergei Krasheninnikov and published by Springer. This book was released on 2021-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current state of understanding concerning edge plasma, which bridges hot fusion plasma, with a temperature of roughly one million degrees Kelvin with plasma-facing materials, which have melting points of only a few thousand degrees Kelvin. In a fact, edge plasma is one of the keys to solution for harnessing fusion energy in magnetic fusion devices. The physics governing the processes at work in the edge plasma involves classical and anomalous transport of multispecies plasma, neutral gas dynamics, atomic physics effects, radiation transport, plasma-material interactions, and even the transport of plasma species within the plasma-facing materials. The book starts with simple physical models, then moves on to rigorous theoretical considerations and state-of-the-art simulation tools that are capable of capturing the most important features of the edge plasma phenomena. The authors compare the conclusions arising from the theoretical and computational analysis with the available experimental data. They also discuss the remaining gaps in their models and make projections for phenomena related to edge plasma in magnetic fusion reactors.

Download or read book Magnetic Fusion Technology written by Thomas J. Dolan and published by Springer Science & Business Media. This book was released on 2014-02-10 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.

Download or read book A Student s Guide to Numerical Methods written by Ian H. Hutchinson and published by Cambridge University Press. This book was released on 2015-04-30 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: The plain language style, worked examples and exercises in this book help students to understand the foundations of computational physics and engineering.

Download or read book The Fairy Tale of Nuclear Fusion written by L. J. Reinders and published by Springer Nature. This book was released on 2021-05-20 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This carefully researched book presents facts and arguments showing, beyond a doubt, that nuclear fusion power will not be technically feasible in time to satisfy the world's urgent need for climate-neutral energy. The author describes the 70-year history of nuclear fusion; the vain attempts to construct an energy-generating nuclear fusion power reactor, and shows that even in the most optimistic scenario nuclear fusion, in spite of the claims of its proponents, will not be able to make a sizable contribution to the energy mix in this century, whatever the outcome of ITER. This implies that fusion power will not be a factor in combating climate change, and that the race to save the climate with carbon-free energy will have been won or lost long before the first nuclear fusion power station comes on line. Aimed at the general public as well as those whose decisions directly affect energy policy, this book will be a valuable resource for informing future debates.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 2002 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: