Download or read book Densified Biomass written by Thomas B. Reed and published by . This book was released on 1979 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass Densification written by Jaya Shankar Tumuluru and published by Springer Nature. This book was released on 2021-01-26 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph discusses the various biomass feedstocks currently available for biofuels production, and mechanical preprocessing technologies to reduce the feedstock variability for biofuels applications. Variability in the properties of biomass—in terms of moisture, particle size distribution, and low-density—results in storage, transportation, handling, and feeding issues. Currently, biorefineries face serious particle bridging issues, uneven discharge, jamming of equipment, and transportation problems. These issues must be solved in order for smooth operations to be possible. Mechanical preprocessing technologies, such as size reduction, densification, and moisture management using drying and dewatering, can help to overcome these issues. Many densification systems exist that will assist in converting low-density biomass to a high-density commodity type feedstock. In 6 chapters, the impact of densification process variables, such as temperature, pressure, moisture, etc., on biomass particle agglomeration, the quality of the densified products, and the overall energy consumption of the process are discussed, as are the various compression models for powders that can be used for biomass particles agglomeration behavior and optimization of the densification process using statistical and evolutionary methods. The suitability of these densified products for biochemical and thermochemical conversion pathways is also discussed, as well as the various international standards (CEN and ISO) they must adhere to. The author has worked on biomass preprocessing at Idaho National Laboratory for the last ten years. He is the principal investigator for the U.S. Department of Energy Bioenergy Technologies Office-funded “Biomass Size Reduction and Densification” project. He has developed preprocessing technologies to reduce cost and improve quality. The author has published many papers and books focused on biomass preprocessing and pretreatments. Biomass process engineers and biorefinery managers can benefit from this book. Students in chemical, mechanical, biological, and environmental engineering can also use the book to understand preprocessing technologies, which greatly assist in improving the biomass critical material attributes. The book can help policymakers and energy systems planners to understand the biomass properties limitations and technologies to overcome the same.
Download or read book The Biomass Assessment Handbook written by Frank Rosillo-Calle and published by Earthscan. This book was released on 2012 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing importance of biomass as a renewable energy source has lead to an acute need for reliable and detailed information on its assessment, consumption and supply. Responding to this need, and overcoming the lack of standardized measurement and accounting procedures, this handbook provides the reader with the skills to understand the biomass resource base, the tools to assess the resource, and explores the pros and cons of exploitation. Topics covered include assessment methods for woody and herbaceous biomass, biomass supply and consumption, remote sensing techniques as well as vital policy issues.International case studies, ranging from techniques for measuring tree volume to transporting biomass, help to illustrate step-by-step methods and are based on field work experience. Technical appendices offer a glossary of terms, energy units and other valuable resource data.
Download or read book Densified Biomass written by Thomas B. Reed and published by . This book was released on 1979 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Densification Impact On Raw Chemically And Thermally Pretreated Biomass Physical Properties And Biofuels Production written by Jaya Shankar Tumuluru and published by World Scientific. This book was released on 2023-05-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: First-generation ethanol plants did not have many operational challenges as the feedstocks (e.g., corn) used for fuel production are dense, stable, storable, and shippable commodity-type products with fewer conversion challenges. These feedstock properties led the first-generation large-scale biorefineries to grow exponentially. In the second-generation biofuels, the feedstocks used are agricultural and forest residues, dedicated energy crops, industrial wastes, and municipal solid waste. When the industry tested these feedstocks for biofuel production, they faced flowability, storage, transportation, and conversion issues. One way to overcome some of the feeding, handling, transportation, and variable moisture challenges is to densify the biomass. Pellet mills and briquette presses are commonly used to produce densified products. The densified products have uniform size, shape, higher bulk density, and better downstream conversion performance. Also, the densified products are aerobically stable and can be stored for longer durations without any loss in quality.This book's focus is on understanding how the densification process variables, biomass types and their blends, mechanical preprocessing, and thermal and chemical pretreatment methods impact the quality of the densified products produced for biofuel production. Finally, the book also explores the conversion performance of densified biomass for biofuel production.
Download or read book Biomass Biofuels Biochemicals written by Le Zhang and published by Elsevier. This book was released on 2022-01-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbial Fermentation of Biowastes summarizes new advances in the development of various strategies for enhanced microbial fermentation for organic waste conversion to bioenergy/biochemicals, and for biodegradation of plastic waste. Sections cover principles of additive strategies, multi-stage bioreactors, microbial bioaugmentation strategies, genetically engineered microorganisms, co-digestion strategies, feedstock pre-treatment strategies, enzyme technologies, and hybrid technologies methods. In addition, the book reviews progress in the conversion of common wastes to bioenergy and biochemicals via enhanced anaerobic digestion, also summarizing the significant progress achieved on enhancing anaerobic digestion via additive strategy, multi-stage bioreactor strategy, microbial bioaugmentation strategy, genetic engineering approach, and much more. Includes enhancing strategies for microbial fermentation technologies for biowastes conversion to bioenergy and biochemicals Provides progress on bioenergy/resource recovery from common biowastes, including food waste, agricultural waste, manure, wastewater and algal residues Includes microbial biodegradation of plastic waste
Download or read book Energy from Biomass written by and published by . This book was released on 1986 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Handbook of Biomass Combustion and Co firing written by Jaap Koppejan and published by Earthscan. This book was released on 2012-05-16 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique handbook presents both the theory and application of biomass combustion and co-firing, from basic principles to industrial combustion and environmental impact, in a clear and comprehensive manner. It offers a solid grounding on biomass combustion, and advice on improving combustion systems.Written by leading international academics and industrial experts, and prepared under the auspices of the IEA Bioenergy Implementing Agreement, the handbook is an essential resource for anyone interested in biomass combustion and co-firing technologies varying from domestic woodstoves to utility-scale power generation. The book covers subjects including biomass fuel pre-treatment and logistics, modelling the combustion process and ash-related issues, as well as featuring an overview of the current R&D needs regarding biomass combustion.
Download or read book Biomass and Biofuels written by Shibu Jose and published by CRC Press. This book was released on 2015-04-22 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The long-held tenets of the energy sector are being rewritten in the twenty-first century. The rise of unconventional oil and gas and of renewables is transforming our economies and improving our understanding of the distribution of the world’s energy resources and their impacts. A complete knowledge of the dynamics underpinning energy markets is necessary for decision-makers reconciling economic, energy, and environmental objectives. Those that anticipate global energy developments successfully can derive an advantage, while those that fail to do so risk making poor policy and investment decisions. Focused on solving the key challenges impeding the realization of advanced cellulosic biofuels and bioproducts in rural areas, Biomass and Biofuels: Advanced Biorefineries for Sustainable Production and Distribution provides comprehensive information on sustainable production of biomass feedstock, supply chain management of feedstocks to the biorefinery site, advanced conversion processes, and catalysts/biocatalysts for production of fuels and chemicals using conventional and integrated technologies. The book also presents detailed coverage of downstream processing, and ecological considerations for refineries processing lignocellulosic and algal biomass resources. Discussions of feedstock raw materials, methods for biomass conversion, and its effective integration to make biorefinery more sustainable – economically, environmentally, and socially – give you the tools to make informed decisions.
Download or read book Bioenergy Engineering written by Mahendra S. Seveda and published by CRC Press. This book was released on 2021-10-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides information on recent advancements in bioenergy engineering to graduates, post-graduates, research scholars, faculty members, academician, researchers and practitioners studying and working in field of the bioenergy engineering. It is an invaluable information resource on biomass-based biofuels for fundamental and applied research, catering to researchers in the areas of biogas technology, densification techniques, biomass gasification, torrefaction of biomass, biochar production, micro algae production, improved biomass cookstoves, bio-ethanol production and the use of microbial processes in the conversion of biomass into biofuels. It will also be useful to faculties and researchers to understand the present status, advancements and policies in implementation of bioenergy technologies in India. This book will definitely provide a direction to the young researchers in identification of thrust areas of research in the field of bioenergy. The book concludes with research and development endeavours and aspects relating to implementation of advance bioenergy technologies.
Download or read book Biomass Preprocessing and Pretreatments for Production of Biofuels written by Jaya Shankar Tumuluru and published by CRC Press. This book was released on 2018-07-26 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering the physical, chemical, and energy properties of lignocellulosic biomass is important to produce high-quality consistent feedstocks with reduced variability for biofuels production. The emphasis of this book will be the beneficial impacts that mechanical, chemical, and thermal preprocessing methods can have on lignocellulosic biomass quality attributes or specifications for solid and liquid biofuels and biopower production technologies. "Preprocessing" refers to treatments that can occur at a distance from conversion and result in an intermediate with added value, with improved conversion performance and efficiency. This book explores the effects of mechanical, chemical, and thermal preprocessing methods on lignocellulosic biomass physical properties and chemical composition and their suitability for biofuels production. For example, biomass mechanical preprocessing methods like size reduction (which impacts the particle size and distribution) and densification (density and size and shape) are important for feedstocks to meet the quality requirements for both biochemical and thermochemical conversion methods like enzymatic conversion, gasification, and pyrolysis process. Thermal preprocessing methods like drying, deep drying, torrefaction, steam explosion, hydrothermal carbonization, and hydrothermal liquefaction effect feedstock's proximate, ultimate and energy property, making biomass suitable for both solid and liquid fuel production. Chemical preprocessing which includes washing, leaching, acid, alkali, and ammonia fiber explosion that can enable biochemical composition, such as modification of lignin and hemicellulose, and impacts the enzymatic conversion application for liquid fuels production. This book also explores the integration of these preprocessing technologies to achieve desired lignocellulosic biomass quality attributes for biofuels production.
Download or read book Recent Advancements in Biofuels and Bioenergy Utilization written by Prakash Kumar Sarangi and published by Springer. This book was released on 2018-09-29 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concerns relating to global warming, climate change, and increasing energy demands have led to significant research towards the development of alternative energy to substitute the fossil energy sources. Biomass-based energy or biofuels are highly promising due to many perceptible environmental and socio-economic advantages. Cutting-edge academic research and advanced industrial product development have created tremendous scope for the implementation of biofuels at a global scale to reduce the greenhouse gas emissions and supplement the escalating energy demands. The prime focus of this book is to provide an overview of the different technologies utilized to harness the chemical energy from plant-based non-edible biomass and other organic wastes in the form of solid, liquid, and gaseous biofuels. The opportunities and challenges of different biomass conversion technologies, especially biomass-to-liquid, biomass-to-gas and gas-to-liquid routes, as well as biomass pretreatments, densification, anaerobic digestion, reforming, transesterification, supercritical fluid extraction, microalgal carbon sequestration, life-cycle assessment and techno-economic analysis have been comprehensively discussed in this book. This book is an amalgamation of fifteen different chapters each with distinctive investigations and a collective focus relating to the transition from fossil fuels towards carbon-neutral biofuels. This book serves as a benchmark for academic and industrial researchers involved in exploring the true potentials of plant residues and waste organic matter to produce alternative renewable fuels. To realize the real promises of bioenergy, this book attempts to assess the biorefining approaches, biofuel production and application, and environmental sustainability.
Download or read book Wood Pellet as a Renewable Source of Energy written by Mohammad Ali Abdoli and published by Springer. This book was released on 2018-05-30 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes the reader on a journey from the moment that raw wood material enters the factory to the final pellet consumption. It starts by reviewing biomass application and its role for the future development of renewable energies, discussing different biomass conversion methods as alternatives to direct utilization. The second chapter then comprehensively examines densification processes, with a focus on the pelleting process. Chapter three further elaborates on the pelleting process, including an overview of the pellet structure and properties, and the history of this process. The subsequent chapters provide a detailed account of the production process from raw material delivery to final distribution, addressing the chemical and physical quality, and presenting measurement methods and standards. In the final chapters, the authors describe in detail the pellet combustion process and emissions.
Download or read book Renewable Energy and Green Technology written by Narendra Kumar and published by CRC Press. This book was released on 2021-12-09 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Energy and Green Technology: Principles and Practices is based on the present need to understand the principles and utility of renewable energy and green technology to minimize dependency on fossil fuels in global development. Renewable energy is the best and cheapest source of energy as an alternate resource. There is massive potential for renewable energy globally, including in India. The efficient utilization of renewable energy resources could minimize the impact of climate change globally. Generally, renewable energy is generated from essentially inexhaustible sources, including wind power, solar power, geothermal energy, tidal energy, biomass energy, and other sources. Hence, encouraging renewable energy use could save our tomorrow from the climate change perspective and in terms of sustainable food production. This book promotes the exchange of ideas, policy formulation, and collective action to ensure a smooth transition to renewable energy. It describes the technological interventions for reducing environmental and economic damage resulting from the use of conventional energy sources. In this book, the focus is on utilizing various renewable energy sources in diverse sectors. It also elaborates the descriptive methodology of different renewable energies, accompanied by figures and tables. It provides information on biogas energy plants, gasifier technologies, and hydropower technologies, among others, along with their applications. Further, it delves into energy concepts and details significant advantages of the energy resources for sustaining the future world. Lastly, this book will provide instant access to comprehensive, cutting-edge knowledge, making it possible for academicians and researchers to utilize this ever-growing wealth of information. Key features Emphasizes the understanding of the principles and utility of renewable energy and green technology to minimize dependency on fossil fuels in the era of global development Focuses on recent trends in renewable energy with principles and practices in relation to climate change Highlights advanced approaches for sustainable use of renewable energy sources Illustrates the methodology for various aspects of renewable energy with figures and charts Discusses the green technology usages of the agriculture and forestry sectors Provides comprehensive cutting-edge information for policymakers in the field of renewable energy
Download or read book Bioenergy Guidebook written by Raelen Williard and published by DIANE Publishing. This book was released on 1994 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass for Energy Country Specific Show Case Studies written by Tariq Al-Shemmeri and published by MDPI. This book was released on 2018-04-27 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Biomass for Energy Country Specific Show Case Studies" that was published in Energies
Download or read book Biofuels from Agricultural Wastes and Byproducts written by Hans P. Blaschek and published by John Wiley & Sons. This book was released on 2016-06-14 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional agriculture and emerging biofuels technology produce a number of wastes and by-products, ranging from corn fiber and glycerin to animal manure, that have the potential to serve as the basis for additional sources of bioenergy that includes both liquid biofuels and biogas. Biofuels from Agricultural Wastes and Byproducts is the first book to focus solely on the production of biofuels primarily from agricultural waste and by-products. The book is divided roughly into two sections. The first section looks at liquid biofuel production from agricultural byproducts, densification of agricultural residues, and the delivery from farm to processing plant of waste and byproducts for use in biofuel production. The second section focuses on anaerobic digestion of food and animal wastes, microbial diversity, molecular and biochemical aspects of methanogensis. Together these sections solidify Biofuels from Agricultural Wastes and Byproducts as a definitive source of information on the use of agricultural waste and by-products in biofuel production.
