Download or read book Demonstration of Removal Separation and Recovery of Heavy Metals from Industrial Wastestreams Using Molecular Recognition Technology MRT written by Katherine H. Ford and published by . This book was released on 2002-11-01 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report validates the performance and life cycle costs of molecular recognition technology (MRT) for selective heavy metal recovery from industrial process waste streams. MRT selectively removes heavy metal ions using synthetic chemical compounds called macrocyclic ligands. These ligands complex with the targeted heavy metal ions while allowing alkaline earth and alkali metal ions to pass through the MRT system. The captured heavy metal ions can be regenerated in a highly purified concentrated form, which can be recycled back to the industrial process or sold to a metal reclaimer. IBC Technologies, Inc., has patented these macrocyclic ligands as Superligs. MRT can recover in a single process Cu, Cd, Cr (Cr VI or Cr III), Ni, Pb, Zn, and Ag to below regulated discharge limits for industrial wastewater treatment plants. For other applications, MRT can be designed to remove single metal ions such as arsenic (As). This report includes all the data from the operational runs of the pilot scale MRT demonstration at Puget Sound Naval Shipyard's industrial wastewater pretreatment facility (IWPF). At the IWPF, two MRT mixed bed columns were used where Superlig 327 recovered copper, lead, silver, nickel, cadmium and zinc from the influent stream. Superlig 3O7 and Superlig 310 were used to recover chromium (VI) and chromium (III) respectively. The efficiency of MRT system was calculated and cost data presented along with a discussion of regulatory issues.
Download or read book Tools for Green Chemistry Volume 10 written by Evan S. Beach and published by John Wiley & Sons. This book was released on 2017-06-12 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 10 in the Handbook of Green Chemistry series provides useful and practical tools, databases, and laboratory approaches to support chemists working in both academia and industry in achieving their green chemistry goals. Among many other helpful techniques covered, the authors offer prediction software, life cycle assessment methodology, and screening tools.
Download or read book Waste Production and Utilization in the Metal Extraction Industry written by Sehliselo Ndlovu and published by CRC Press. This book was released on 2017-06-27 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasingly stringent environmental regulations and industry adoption of waste minimization guidelines have thus, stimulated the need for the development of recycling and reuse options for metal related waste. This book, therefore, gives an overview of the waste generation, recycle and reuse along the mining, beneficiation, extraction, manufacturing and post-consumer value chain. This book reviews current status and future trends in the recycling and reuse of mineral and metal waste and also details the policy and legislation regarding the waste management, health and environmental impacts in the mining, beneficiation, metal extraction and manufacturing processes. This book is a useful reference for engineers and researchers in industry, policymakers and legislators in governance, and academics on the current status and future trends in the recycling and reuse of mineral and metal waste. Some of the key features of the book are as follows: Holistic approach to waste generation, recycling and reuse along the minerals and metals extraction. Detailed overview of metallurgical waste generation. Practical examples with complete flow sheets, techniques and interventions on waste management. Integrates the technical issues related to efficient resources utilization with the policy and regulatory framework. Novel approach to addressing future commodity shortages.
Download or read book Metal Sustainability written by Reed M. Izatt and published by John Wiley & Sons. This book was released on 2016-07-29 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sustainable use of natural resources is an important global challenge, and improved metal sustainability is a crucial goal for the 21st century in order to conserve the supply of critical metals and mitigate the environmental and health issues resulting from unrecovered metals. Metal Sustainability: Global Challenges, Consequences and Prospects discusses important topics and challenges associated with sustainability in metal life cycles, from mining ore to beneficiation processes, to product manufacture, to recovery from end-of-life materials, to environmental and health concerns resulting from generated waste. The broad perspective presented highlights the global interdependence of the many stages of metal life cycles. Economic issues are emphasized and relevant environmental, health, political, industrial and societal issues are discussed. The importance of applying green chemistry principles to metal sustainability is emphasized. Topics covered include: • Recycling and sustainable utilization of precious and specialty metals • Formal and informal recycling from electronic and other high-tech wastes • Global management of electronic wastes • Metal reuse and recycling in developing countries • Effects of toxic and other metal releases on the environment and human health • Effect on bacteria of toxic metal release • Selective recovery of platinum group metals and rare earth metals • Metal sustainability from a manufacturing perspective • Economic perspectives on sustainability, mineral development, and metal life cycles • Closing the Loop – Minerals Industry Issues The aim of this book is to improve awareness of the increasingly important role metals play in our high-tech society, the need to conserve our metal supply throughout the metal life cycle, the importance of improved metal recycling, and the effects that unhindered metal loss can have on the environment and on human health.
Download or read book Minewater Treatment written by Melanie Brown and published by IWA Publishing. This book was released on 2002-03-31 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of Groundwater Set - Buy all six books and save over 30% on buying separately! Biffaward Winner 2002 The Clean Rivers Trust has fought off stiff competition to become the Research and Development - Technology Category winner at the Biffaward Awards 2002, with its project "Technology Analysis of Acid Mine Drainage Treatment Methods". Minewater Treatment - Technology, Application and Policy, was produced based on the findings of the research to aid in the selection, design and implementation of the most appropriate treatment techniques for particular minewater discharges. Much work has been carried out in recent decades concerning minewater treatment, both in the UK and worldwide. Many different bodies and organizations are involved in developing minewater treatment processes and schemes. Minewater Treatment addresses the need for a single source of state-of-the-art information that draws all the latest research material together. Key features of the book include: a full literature review of minewater treatment throughout the world an overview of relevant legislation and policy in a global context a review of currently available methods for treating minewater worldwide a site specific inventory of minewater treatment schemes within the UK, including compilation of available monitoring data and assessment of performance a review of emerging and innovative minewater treatment technologies and consideration of related academic research within the UK a comprehensive list of active and innovative minewater treatment technologies that are not currently compiled in a book or other review publication a detailed summary and recommendations section assessing the applicability, efficiency and cost-effectiveness of minewater treatment schemes Relevant scientific subject matter is presented in a concise, easily accessible manner to assist with the objective assessment of the progress made to date. Heavily illustrated with many colour photographs, the book allows best use to be made of the collective experience of minewater treatment practitioners throughout the UK, whilst at the same time placing the UK experience within a global context. An invaluable reference work for mining companies, consultants, planning officers, environmental research scientists, environmental agencies, water utilities and regulatory bodies, Minewater Treatment is a definitive source of information on minewater treatment technologies and will help facilitate the selection of the most appropriate technique required to tackle particular minewater discharge problems. Contents The minewater problem Treatment options Existing sites in the UK: Case studies Existing sites in the UK: Site summaries Summary & conclusions
Download or read book Actinide Separations written by James D. Navratil and published by . This book was released on 1980 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biochar Systems for Smallholders in Developing Countries written by Sebastian B. Scholz and published by World Bank Publications. This book was released on 2014-06-23 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report offers a review of what is known about opportunities and risks of biochar systems in developing countries. Its aim is to fill in critical knowledge gaps between the biochar research community and development practicioners on the ground.
Download or read book Applications of Ion Exchange Materials in the Environment written by Inamuddin and published by Springer. This book was released on 2019-02-01 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the applications of ion-exchange materials in the area of environmental analysis and treatment. It includes chapters on applications of organic, inorganic and composite ion exchange materials and hexacyanoferrates in various fields such as chemical and biochemical separations, water purification, removal of harmful impurities, dyes and cationic and anionic complexes. This title is a highly valuable source of knowledge on ion-exchange materials and their applications suitable for postgraduate students and researchers but also to industrial R&D specialists in chemistry, chemical, and biochemical technology. Additionally, this book will provide an in-depth knowledge of ion-exchange column and operations suitable for engineers and industrialists.
Download or read book Rare Metal Technology 2018 written by Hojong Kim and published by Springer. This book was released on 2018-01-04 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Topics include the extraction and processing of elements such as antimony, arsenic, gold, indium, palladium, platinum, rare earth metals including yttrium and neodymium, titanium, tungsten, and vanadium. Rare processing techniques are covered, including direct extraction processes for rare-earth recovery, biosorption of precious metals, fluorination behavior of uranium and zirconium mixture of fuel debris treatment, and recovery of valuable components of commodity metals such as zinc, nickel, and metals from slag.
Download or read book Industrial Pharmaceutical Biotechnology written by Heinrich Klefenz and published by Wiley-VCH. This book was released on 2002-04-22 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on pharmaceutical biotechnology as a key area of life sciences. The complete range of concepts, processes and technologies of biotechnology is applied in modern industrial pharmaceutical research, development and production. The results of genome sequencing and studies of biological-genetic function are combined with chemical, micro-electronic and microsystem technology to produce medical devices and diagnostic biochips. A multitude of biologically active molecules is expanded by additional novel structures created with newly arranged gene clusters and bio-catalytic chemical processes. New organisational structures in the co-operation of institutes, companies and networks enable faster knowledge and product development and immediate application of the results of research and process development. This book is the ideal source of information for scientists and engineers in research and development, for decision-makers in biotech, pharma and chemical corporations, as well as for research institutes, but also for founders of biotech companies and people working for venture capital corporations.
Download or read book Resource Recovery and Recycling from Metallurgical Wastes written by S.R. Ramachandra Rao and published by Elsevier. This book was released on 2011-08-29 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource recovery and recycling from millions of tons of wastes produced from industrial activities is a continuing challenge for environmental engineers and researchers. Demand for conservation of resources, reduction in the quantity of waste and sustainable development with environmental control has been growing in every part of the world. Resource Recovery and Recycling from Metallurgical Wastes brings together the currently used techniques of waste processing and recycling, their applications with practical examples and economic potentials of the processes. Emphasis is on resource recovery by appropriate treatment and techniques. Material on the subject is scatterend in waste management and environmental related journals, conference volumes and government departmental technical reports. This work serves as a source book of information and as an educational technical reference for practicing scientists and engineers, as well as for students. - Describes the currently used and potential techniques for the recovery of valuable resources from mineral and metallurgical wastes - Discusses the applications to specific kinds of wastes with examples from current practices, as well as eht economics of the processes - Presents recent and emerging technologies of potentials in metal recycling and by-product utilization
Download or read book Post Treatments of Anaerobically Treated Effluents written by Vinay Kumar Tyagi and published by IWA Publishing. This book was released on 2019-06-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The anaerobic process is considered to be a sustainable technology for organic waste treatment mainly due to its lower energy consumption and production of residual solids coupled with the prospect of energy recovery from the biogas generated. However, the anaerobic process cannot be seen as providing the ‘complete’ solution as its treated effluents would typically not meet the desired discharge limits in terms of residual carbon, nutrients and pathogens. This has given impetus to subsequent post treatment in order to meet the environmental legislations and protect the receiving water bodies and environment. This book discusses anaerobic treatment from the perspective of organic wastes and wastewaters (municipal and industrial) followed by various post-treatment options for anaerobic effluent polishing and resource recovery. Coverage will also be from the perspective of future trends and thoughts on anaerobic technologies being able to support meeting the increasingly stringent disposal standards. The resource recovery angle is particularly interesting as this can arguably help achieve the circular economy. It is intended the information can be used to identify appropriate solutions for anaerobic effluent treatment and possible alternative approaches to the commonly applied post-treatment techniques. The succeeding discussion is intended to lead on to identification of opportunities for further research and development. This book can be used as a standard reference book and textbook in universities for Master and Doctoral students. The academic community relevant to the subject, namely faculty, researchers, scientists, and practicing engineers, will find the book both informative and as a useful source of successful case studies.
Download or read book Abandoned Mine Site Characterization and Cleanup Handbook written by Nick Cato and published by . This book was released on 2001-01-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook has been developed by the EPA as a resource for project managers working on addressing the environmental concerns posed by inactive mines and mineral processing sites. This is not policy or guidance, but a compendium of info. gained during many years of experience on mine site cleanup projects. Chapters: Overview of Mining and Mineral Processing Operations; Environmental Impacts from Mining; Setting Goals and Measuring Success; Community Involve. at Mining Waste Sites; Scoping Studies of Mining and Mineral Processing Impact Areas; Sampling and Analysis of Impacted Areas; Scoping and Conducting Ecological and Human Health Risk Assessments at Superfund Mind Waste Sites; Site Mgmt. Strategies; and Remediation and Cleanup Options.
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has precededan understandingofthescientificprinciples. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding ofthe chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who requirea more fundamental understanding oflubricants.
Download or read book Introduction to Soil Chemistry written by Alfred R. Conklin and published by John Wiley & Sons. This book was released on 2005-08-08 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to soil analysis for chemists and environmental scientists Soil-so essential to life on earth-is one of the most complicated of materials. A complex mixture of inorganic and organic solids, liquids, and gases, soil presents a challenging material for analysis, especially for researchers who are not specialists in soil chemistry. This clear, broadly applicable reference provides chemists and environmental scientists with the background they need to analyze soil, interpret their findings, and develop new analytical methods for soil. Introduction to Soil Chemistry will also be valuable to the soil scientist confronting soil analyses that appear to be incorrect or do not work. Introduction to Soil Chemistry: Analysis and Instrumentation investigates the most important soil characteristics that impact analysis and the procedures, chemicals, and equipment used to determine the composition and quantity of soil constituents. It also discusses factors that interfere with accurate soil analysis. Chapters examine such topics as: * Large features-horizons, peds, soil color, and soil naming * Microscopic to atomic orbital description of soil chemical characteristics * Soil components in combination * The biological and organic components in soil * The soil solution and soil air * Electrical measurements, titration, and extraction * Spectroscopy and chromatography * Speciation This book is enhanced by numerous examples within the text, which provide the reader with a practical understanding of various analytical procedures, along with the pitfalls and interferences that may be encountered. Bibliographies and additional resources appear at the end of each chapter.
Download or read book Phytoremediation Potential of Bioenergy Plants written by Kuldeep Bauddh and published by Springer. This book was released on 2017-03-29 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The globally escalating population necessitates production of more goods and services to fulfil the expanding demands of human beings which resulted in urbanization and industrialization. Uncontrolled industrialization caused two major problems – energy crisis and accelerated environmental pollution throughout the world. Presently, there are technologies which have been proposed or shown to tackle both the problems. Researchers continue to seek more cost effective and environmentally beneficial pathways for problem solving. Plant kingdom comprises of species which have the potential to resolve the couple problem of pollution and energy. Plants are considered as a potential feedstock for development of renewable energy through biofuels. Another important aspect of plants is their capacity to sequester carbon dioxide and absorb, degrade, and stabilize environmental pollutants such as heavy metals, poly-aromatic hydrocarbons, poly-aromatic biphenyls, radioactive materials, and other chemicals. Thus, plants may be used to provide renewable energy generation and pollution mitigation. An approach that could amalgamate the two aspects can be achieved through phytoremediation (using plants to clean up polluted soil and water), and subsequent generation of energy from the phyto-remediator plants. This would be a major advance in achieving sustainability that focuses on optimizing ‘people’ (social issues), ‘planet’ (environmental issues), and ‘profit’ (financial issues). The “Phytoremediation-Cellulosic Biofuels” (PCB) process will be socially beneficial through reducing pollution impacts on people, ecologically beneficial through pollution abatement, and economically viable through providing revenue that supplies an energy source that is renewable and also provides less dependence on importing foreign energy (energy-independence). The utilization of green plants for pollution remediation and energy production will also tackle some other important global concerns like global climate change, ocean acidification, and land degradation through carbon sequestration, reduced emissions of other greenhouse gases, restoration of degraded lands and waters, and more. This book addresses the overall potential of major plants that have the potential to fulfil the dual purposes of phytoremediation and energy generation. The non-edible bioenergy plants that are explored for this dual objective include Jatropha curcas, Ricinus communis, Leucaena leucocephalla, Milletia pinnata, Canabis sativa, Azadirachta indica, and Acacia nilotica. The book addresses all possible aspects of phyto-remediaton and energy generation in a holistic way. The contributors are one of most authoritative experts in the field and have covered and compiled the best content most comprehensively. The book is going to be extremely useful for researchers in the area, research students, academicians and also for policy makers for an inclusive understanding and assessment of potential in plant kingdom to solve the dual problem of energy and pollution.
Download or read book Critical Metals Handbook written by Gus Gunn and published by John Wiley & Sons. This book was released on 2014-01-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mankind is using a greater variety of metals in greater quantities than ever before. As a result there is increasing global concern over the long-term availability of secure and adequate supplies of the metals needed by society. Critical metals, which are those of growing economic importance that might be susceptible to future scarcity, are a particular worry. For many of these we have little information on how they are concentrated in the Earth’s crust, how to extract them from their ores, and how to use, recycle and dispose of them effectively and safely. Published with the British Geological Survey, the Critical Metals Handbook brings together a wealth of knowledge on critical metals and provides a foundation for improving the future security and sustainability of critical metal supplies. Written by international experts, it provides a unique source of authoritative information on diverse aspects of the critical metals, including geology, deposits, processing, applications, recycling, environmental issues and markets. It is aimed at a broad non-specialist audience, including professionals and academics working in the exploration and mining sectors, in mining finance and investment, and in mineral processing and manufacturing. It will also be a valuable reference for policy makers concerned with resource management, land-use planning, eco-efficiency, recycling and related fields.
