Download or read book Delay Tolerant Networking for Cubesat Topologies and Platforms written by Paul D. Muri and published by . This book was released on 2013 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: A CubeSat is a pico-satellite platform with a volume as small as 10cm3. Universities, companies, and governments use CubeSats to conduct space technology experiments, demonstrations, and research at lower manufacturing costs. Traditionally, CubeSats communicate over amateur frequencies using point-to-point links. This severely limits both the data rate and the time window to downlink to a single ground station. However, CubeSats, as part of a spaced-based sensor network, have the potential to augment existing systems through interlinking with other spacecraft and ground stations. Through lower orbits and strategic topologies, CubeSat networks can provide data with increased temporal and spatial resolution to supplement low earth orbit missions. In this dissertation, Delay Tolerant Networking (DTN) communication protocols were designed to enable hop-by-hop store and forward communications between CubeSats. From analysis and testing, it was demonstrated that DTN protocols can be applied to address the limitations of CubeSat networks such as radio frequency link margins, topology management, intermittent connections, slow downlink data-rates, long propagation delays, and constrained processing resources. The major contributions of the dissertation are a deployable high gain S-band helical prototype network simulation of low earth orbits with optimized network timing parameters, a DTN network testbed with space link channel emulation, and an implementation of DTN on CubeSat hardware.
Download or read book Delay Tolerant Setellite Networks written by Juan A. Fraire, and published by Artech House. This book was released on 2017-12-31 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cutting-edge resource provides a comprehensive treatment of applying delay-tolerant networking (DTN) principles to satellite-based network communications. Detailed models and analytical tools are used to evaluate performance and provide guidance in the field. This book presents the state-of-the-art in existing on-board and ground technologies that support satellite applications, such as communications protocols, algorithms, and security procedures. Readers gain key insight into the fundamental concepts of DTN applied to satellite networks (DTSNs) and case studies are provided. This book presents an authoritative introduction to the methods for computing metrics for satellite network modeling. Satellite communications are examined, including satellite links, communication protocols, and distributed multiple access schemes, such as time division, code division, and frequency division. This book focuses on ways in which DTN might make terrestrial communication and observation via earth orbiting satellites less expensive and more robust. The fundamental concepts and analysis of the Ring Road Architecture are explored. Unique analyses on the motivating factors of using Inter-Satellite Links (ISL) to form networks in disruptive environments in space are discussed. This book explores the limits of larger and complex DTSNs as the number of satellites increase and different orbital formations become possible. As satellite networks become larger in upcoming years this book provides a guide for readers to stay informed about standard protocols such as DTN that will allow seamless interoperation, cost reduction, and risk mitigation.
Download or read book Delay Tolerant Networks written by Athanasios V. Vasilakos and published by CRC Press. This book was released on 2016-04-19 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: A class of Delay Tolerant Networks (DTN), which may violate one or more of the assumptions regarding the overall performance characteristics of the underlying links in order to achieve smooth operation, is rapidly growing in importance but may not be well served by the current end-to-end TCP/IP model. Delay Tolerant Networks: Protocols and Applicat
Download or read book Delay Tolerant Networks written by Longxiang Gao and published by Springer. This book was released on 2015-05-14 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief presents emerging and promising communication methods for network reliability via delay tolerant networks (DTNs). Different from traditional networks, DTNs possess unique features, such as long latency and unstable network topology. As a result, DTNs can be widely applied to critical applications, such as space communications, disaster rescue, and battlefield communications. The brief provides a complete investigation of DTNs and their current applications, from an overview to the latest development in the area. The core issue of data forward in DTNs is tackled, including the importance of social characteristics, which is an essential feature if the mobile devices are used for human communication. Security and privacy issues in DTNs are discussed, and future work is also discussed.
Download or read book Delay Tolerant Networks written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Delay Tolerant Networking DTN for Geo stationary Earth Orbit GEO Satellite Communications written by Harika Davuluri and published by . This book was released on 2010 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Small Satellites written by Joseph N. Pelton and published by Springer. This book was released on 2020-09-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decade, the field of small satellites has expanded the space industry in a powerful way. Hundreds, indeed thousands, of these innovative and highly cost-efficient satellites are now being launched from Earth to establish low-cost space systems. These smallsats are engaged in experiments and prototype testing, communications services, data relay, internet access, remote sensing, defense and security related services, and more. Some of these systems are quite small and are simple student experiments, while others in commercial constellations are employing state-of-the-art technologies to deliver fast and accurate services. This handbook provides a comprehensive overview of this exciting new field. It covers the technology, applications and services, design and manufacture, launch arrangements, ground systems, and economic and regulatory arrangements surrounding small satellites. The diversity of approach in recent years has allowed for rapid innovation and economic breakthroughs to proceed at a pace that seems only to be speeding up. In this reference work, readers will find information pertaining to all aspects of the small satellite industry, written by a host of international experts in the field.
Download or read book 5G Mobile and Wireless Communications Technology written by Afif Osseiran and published by Cambridge University Press. This book was released on 2016-06-02 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the 5G landscape covering technology options, most likely use cases and potential system architectures.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Ad Hoc Mobile and Wireless Networks written by Maria Rita Palattella and published by Springer Nature. This book was released on 2019-09-25 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 18th International Conference on Ad-Hoc, Mobile, and Wireless Networks, ADHOC-NOW 2019, held in Luxembourg, in October 2019. The 37 full and 10 short papers presented were carefully reviewed and selected from 64 submissions. The papers provide an in-depth and stimulating view on the new frontiers in the field of mobile, ad hoc and wireless computing. They are organized in the following topical sections: IoT for emergency and disaster management; scheduling and synchronization in WSN; routing strategies for WSN; LPWANs and their integration with satellite; performance improvement of wireless and sensor networks; optimization schemes for increasing sensors lifetime; vehicular and UAV networks; body area networks, IoT security and standardization.
Download or read book Spacewire User s Guide written by Steve Parkes (Prof.) and published by . This book was released on 2012 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book QoS Over Heterogeneous Networks written by Mario Marchese and published by John Wiley & Sons. This book was released on 2007-04-30 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of quality of service (QoS) has risen with the recent evolution of telecommunication networks, which are characterised by a great heterogeneity. While many applications require a specific level of assurance from the network; communication networks are characterized by different service providers, transmission means and implementer solutions such as asynchronous transfer mode (ATM), Internet protocol version 4 (IPv4), IPv6 and MPLS. Providing comprehensive coverage of QoS issues within heterogeneous network environments, “QoS Over Heterogeneous Networks” looks to find solutions to questions such as does QoS fit within heterogeneous networks and what is the impact on performance if information traverses different network portions that implement specific QoS schemes. Includes: A series of algorithms and protocols to help solve potential QoS problems. State of the art case studies and operative examples to illustrate points made. Information on QoS mapping in terms of service-level specification (SLS) and an in-depth discussion of related issues Chapters end-to-end (E2E) QoS, QoS architecture, QoS over heterogeneous networks and QoS internetworking and mapping. An ideal book for graduate students, researchers and lecturers. System designers, developers and engineers will also find “QoS Over Heterogeneous Networks” a valuable reference.
Download or read book CubeSat Handbook written by Chantal Cappelletti and published by Academic Press. This book was released on 2020-09-25 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: CubeSat Handbook: From Mission Design to Operations is the first book solely devoted to the design, manufacturing, and in-orbit operations of CubeSats. Beginning with an historical overview from CubeSat co-inventors Robert Twiggs and Jordi Puig-Suari, the book is divided into 6 parts with contributions from international experts in the area of small satellites and CubeSats. It covers topics such as standard interfaces, on-board & ground software, industry standards in terms of control algorithms and sub-systems, systems engineering, standards for AITV (assembly, integration, testing and validation) activities, and launch regulations. This comprehensive resource provides all the information needed for engineers and developers in industry and academia to successfully design and launch a CubeSat mission. Provides an overview on all aspects that a CubeSat developer needs to analyze during mission design and its realization Features practical examples on how to design and deal with possible issues during a CubeSat mission Covers new developments and technologies, including ThinSats and PocketQubeSats
Download or read book Small Satellites for Earth Observation written by Rainer Sandau and published by Springer Science & Business Media. This book was released on 2008-04-18 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 6th IAA Symposium on Small Satellites for Earth Observation, initiated by the International Academy of Astronautics (IAA), was again hosted by DLR, the German Aerospace Center. The participation of scientists, engineers, and managers from 24 countries reflected the high interest in the use of small satellites for dedicated missions applied to Earth observation. The contributions showed that dedicated Earth observation missions cover a wide range of very different tasks.
Download or read book Internet of Things From Hype to Reality written by Ammar Rayes and published by Springer. This book was released on 2016-10-22 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively describes an end-to-end Internet of Things (IoT) architecture that is comprised of devices, network, compute, storage, platform, applications along with management and security components. It is organized into five main parts, comprising of a total of 11 chapters. Part I presents a generic IoT reference model to establish a common vocabulary for IoT solutions. This includes a detailed description of the Internet protocol layers and the Things (sensors and actuators) as well as the key business drivers to realize the IoT vision. Part II focuses on the IoT requirements that impact networking protocols and provides a layer-by-layer walkthrough of the protocol stack with emphasis on industry progress and key gaps. Part III introduces the concept of Fog computing and describes the drivers for the technology, its constituent elements, and how it relates and differs from Cloud computing. Part IV discusses the IoT services platform, the cornerstone of the solution followed by the Security functions and requirements. Finally, Part V provides a treatment of the topic of connected ecosystems in IoT along with practical applications. It then surveys the latest IoT standards and discusses the pivotal role of open source in IoT. “Faculty will find well-crafted questions and answers at the end of each chapter, suitable for review and in classroom discussion topics. In addition, the material in the book can be used by engineers and technical leaders looking to gain a deep technical understanding of IoT, as well as by managers and business leaders looking to gain a competitive edge and understand innovation opportunities for the future.” Dr. Jim Spohrer, IBM “This text provides a very compelling study of the IoT space and achieves a very good balance between engineering/technology focus and business context. As such, it is highly-recommended for anyone interested in this rapidly-expanding field and will have broad appeal to a wide cross-section of readers, i.e., including engineering professionals, business analysts, university students, and professors.” Professor Nasir Ghani, University of South Florida
Download or read book Digital Satellite Communications written by Giovanni E. Corazza and published by Springer Science & Business Media. This book was released on 2007-12-03 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses long-term developments Addresses advanced physical layer techniques designed for broadband communications, for fixed and mobile terminals Considers 4G evolutions and possible convergence between different technologies
Download or read book Ames Research Center written by and published by . This book was released on 1968 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
