Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1996 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition comprehensively updates the field of fracture mechanics by including details of the latest research programmes. It contains new material on non-metals, design issues and statistical aspects. The application of fracture mechanics to different types of materials is stressed.

Download or read book Non Linear Elastic Deformations written by R. W. Ogden and published by Courier Corporation. This book was released on 2013-04-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classic in the field covers application of theory of finite elasticity to solution of boundary-value problems, analysis of mechanical properties of solid materials capable of large elastic deformations. Problems. References.

Download or read book Mechanics Of Fluid Deformations Rigid Body Rotations And Plane Channel Flow Stability written by Oleg V Troshkin and published by World Scientific. This book was released on 2021-03-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a new approach to analyzing hydrodynamic stability.With the use of standard remedies of functional analysis, theory of boundary value problems and infinitesimal Lie algebras, it is shown in the book that large vortex mushrooms of an ideal incompressible fluid in a vertical strip behind a water hammer proves to be 2D (plane-parallel) nonlinear (for arbitrary disturbances of initial velocities) and long wave stable. It is one of the many examples provided in the book discussing hydrodynamic stability.

Download or read book Mechanics of Finite Deformation and Fracture written by Majid Aleyaasin and published by CRC Press. This book was released on 2016-01-05 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important work covers the fundamentals of finite deformation in solids and constitutive relations for different types of stresses in large deformation of solids. In addition, the book covers the fracture phenomena in brittle or quasi-brittle materials in which large deformation does not occur. The book provides a thorough understanding of frac

Download or read book Nonlinear Continuum Mechanics and Large Inelastic Deformations written by Yuriy I. Dimitrienko and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a rigorous axiomatic approach to continuum mechanics under large deformation. In addition to the classical nonlinear continuum mechanics – kinematics, fundamental laws, the theory of functions having jump discontinuities across singular surfaces, etc. - the book presents the theory of co-rotational derivatives, dynamic deformation compatibility equations, and the principles of material indifference and symmetry, all in systematized form. The focus of the book is a new approach to the formulation of the constitutive equations for elastic and inelastic continua under large deformation. This new approach is based on using energetic and quasi-energetic couples of stress and deformation tensors. This approach leads to a unified treatment of large, anisotropic elastic, viscoelastic, and plastic deformations. The author analyses classical problems, including some involving nonlinear wave propagation, using different models for continua under large deformation, and shows how different models lead to different results. The analysis is accompanied by experimental data and detailed numerical results for rubber, the ground, alloys, etc. The book will be an invaluable text for graduate students and researchers in solid mechanics, mechanical engineering, applied mathematics, physics and crystallography, as also for scientists developing advanced materials.

Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra Fine Microstructures written by M. Nastasi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an attempt to meet the demand for new ultra-high strength materials, the processing of novel material configurations with unique microstructure is being explored in systems which are further and further from equilibrium. One such class of emerging materials is the so-called nanophased or nanostructured materials. This class of materials includes metals and alloys, ceramics, and polymers characterized by controlled ultra-fine microstructural features in the form oflayered, fibrous, or phase and grain distribution. While it is clear that these materials are in an early stage of development, there is now a sufficient body of literature to fuel discussion of how the mechanical properties and deformation behavior can be controlled through control of the microstructure. This NATO-Advanced Study Institute was convened in order to assess our current state of knowledge in the field of mechanical properties and deformation behavior in materials with ultra fine microstructure, to identify opportunities and needs for further research, and to identify the potential for technological applications. The Institute was the first international scientific meeting devoted to a discussion on the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Included in these discussions were the topics of superplasticity, tribology, and the supermodulus effect. Lectures were also presented which covered a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties.

Download or read book Discontinuous Deformation Analysis in Rock Mechanics Practice written by Yossef H. Hatzor and published by CRC Press. This book was released on 2017-07-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community.

Download or read book Macro and Micro Mechanics of High Velocity Deformation and Fracture written by Kozo Kawata and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Macro- and Micro-Mechanics of High Velocity Deformation and Fracture (MMMHVDF) (August 12 - 15, 1985) was held at Science Council of Japan, under the sponsor ship of IUTAM, Science Council of Japan, Japan Society for the Promotion of Science, The Commemorative Association for the Japan World Exposition (1970), and The Japan Society for Aeronautical and Space Sciences. The proposal of the symposium was accepted by the General Assembly of IUTAM, and the scientists mentioned below were appointed by the Bureau of IUTAM to serve as member of the Scientific Committee. The main object of the Symposium was to make a general survey of recent developments in the re search of high velocity solid mechanics and to explore further new ideas for dealing with unsettled problems, of fundamental nature as well as of practical importance. The subjects covered theoretical, experimental, and numerical fields in macro- and micro-mechanics associated with high velocity de formatio~ and fracture in soldis, covering metals, ceramics, polymers, and composites.

Download or read book Multiscale Modeling in Continuum Mechanics and Structured Deformations written by Gianpetro Del Piero and published by Springer. This book was released on 2014-05-04 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated account of the state of the art in the subject, presenting recent progress in two active and related areas of continuum mechanics: fracture mechanics and structured deformations.

Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1989-01-17 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition of the well-received engineering materials book has been completely updated, and now contains over 1,100 citations. Thorough enough to serve as a text, and up-to-date enough to serve as a reference. There is a new chapter on strengthening mechanisms in metals, new sections on composites and on superlattice dislocations, expanded treatment of cast and powder-produced conventional alloys, plastics, quantitative fractography, JIC and KIEAC test procedures, fatigue, and failure analysis. Includes examples and case histories.

Download or read book The Mechanics of Finite Deformation with Applications in Metal Plasticity written by Kerry S. Havner and published by Cambridge Scholars Publishing. This book was released on 2024-07-03 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive background for analysis of the finite deformation of materials. It is intended for engineering scientists, applied mathematicians, and advanced students beginning their studies in the field. The book begins with the geometry of deformation and motion in finite straining. This is followed by the general theory of stress and stress measures (corresponding to each strain measure) and balance laws of continuum physics. Rotating reference frames and related issues of invariance, objective stress-rates, and material spin are then covered. Simple shearing examples illustrate and clarify stress and deformation measures in these chapters. Applications of the general equations to specific material behaviors are presented in chapters 4 to 6. Nonlinear elasticity of rubber, plastic deformation of polycrystalline metals, and multiple-slip (with additional kinematics) in metal crystals are covered. Selected original experiments and nonlinear analyses are included, with precise attributions and numerous illustrations.

Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.

Download or read book Mechanics of Plastic Deformation in Metal Processing written by Erich Gottfried Thomsen and published by . This book was released on 1965 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Materials 2 written by E.J. Hearn and published by Elsevier. This book was released on 1997-11-25 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most important subjects for any student of engineering or materials to master is the behaviour of materials and structures under load. The way in which they react to applied forces, the deflections resulting and the stresses and strains set up in the bodies concerned are all vital considerations when designing a mechanical component such that it will not fail under predicted load during its service lifetime.Building upon the fundamentals established in the introductory volume Mechanics of Materials 1, this book extends the scope of material covered into more complex areas such as unsymmetrical bending, loading and deflection of struts, rings, discs, cylinders plates, diaphragms and thin walled sections. There is a new treatment of the Finite Element Method of analysis, and more advanced topics such as contact and residual stresses, stress concentrations, fatigue, creep and fracture are also covered. Each chapter contains a summary of the essential formulae which are developed in the chapter, and a large number of worked examples which progress in level of difficulty as the principles are enlarged upon. In addition, each chapter concludes with an extensive selection of problems for solution by the student, mostly examination questions from professional and academic bodies, which are graded according to difficulty and furnished with answers at the end.

Download or read book Mechanics of Finite Deformation and Fracture written by Majid Aleyaasin and published by Apple Academic Press. This book was released on 2015-07-06 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important work covers the fundamentals of finite deformation in solids and constitutive relations for different types of stresses in large deformation of solids. In addition, the book covers the fracture phenomena in brittle or quasi-brittle materials in which large deformation does not occur. The book provides a thorough understanding of fracture mechanics as well. Since mathematical proof with full derivation is demonstrated throughout the book, readers will gain the skills to understand and drive the basic concepts on their own, enabling them to put forward new ideas and solutions. Finite deformations in material can occur with change of geometry such that the deformed shape may not resemble the initial shape. Analyzing these types of deformations needs a particular mathematical tool that is always associated with tensor notations. In general the geometry may be non-orthogonal, and the use of covariant and contra-variant tensor concepts to express the finite deformations and the associated mechanical strains are needed. In addition, it is obvious that in large deformations, there are several definitions for stress, each depending on the frame of the stress definitions. The constitutive equations in material also depends on the type of stress that is introduced. In simulation of the material deformation, components of the deformation tensor will be transformed from one frame to another either in orthogonal or in non-orthogonal coordinate of geometry. This informative book covers all this in detail.

Download or read book Inelastic Deformation of Metals written by Donald C. Stouffer and published by John Wiley & Sons. This book was released on 1996-01-05 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a totally new approach, this groundbreaking book establishesthe logical connections between metallurgy, materials modeling, andnumerical applications. In recognition of the fact that classicalmethods are inadequate when time effects are present, or whencertain types of multiaxial loads are applied, the new, physicallybased state variable method has evolved to meet these needs.Inelastic Deformation of Metals is the first comprehensivepresentation of this new technology in book form. It developsphysically based, numerically efficient, and accurate methods forpredicting the inelastic response of metals under a variety ofloading and environmental conditions. More specifically, Inelastic Deformation of Metals: * Demonstrates how to use the metallurgical information to developmaterial models for structural simulations and low cyclic fatiguepredictions. It presents the key features of classical and statevariable modeling, describes the different types of models andtheir attributes, and provides methods for developing models forspecial situations. This book's innovative approach covers such newtopics as multiaxial loading, thermomechanical loading, and singlecrystal superalloys. * Provides comparisons between data and theory to help the readermake meaningful judgments about the value and accuracy of aparticular model and to instill an understanding of how metalsrespond in real service environments. * Analyzes the numerical methods associated with nonlinearconstitutive modeling, including time independent, time dependentnumerical procedures, time integration schemes, inversiontechniques, and sub-incrementing. Inelastic Deformation of Metals is designed to give theprofessional engineer and advanced student new and expandedknowledge of metals and modeling that will lead to more accuratejudgments and more efficient designs. In contrast to existing plasticity books, which discuss few if anycorrelations between data and models, this breakthrough volumeshows engineers and advanced students how materials and modelsactually do behave in real service environments. As greater demandsare placed on technology, the need for more meaningful judgmentsand more efficient designs increases dramatically. Incorporatingthe state variable approach, Inelastic Deformation of Metals: * Provides an overview of a wide variety of metal responsecharacteristics for rate dependent and rate independent loadingconditions * Shows the correlations between the mechanical response propertiesand the deformation mechanisms, and describes how to use thisinformation in constitutive modeling * Presents different modeling options and discusses the usefulnessand limitations of each modeling approach, with material parametersfor each model * Offers numerous examples of material response and correlationwith model predictions for many alloys * Shows how to implement nonlinear material models in stand-aloneconstitutive model codes and finite element codes An innovative, comprehensive, and essential book, InelasticDeformation of Metals will help practicing engineers and advancedstudents in mechanical, aerospace, civil, and metallurgicalengineering increase their professional skills in the moderntechnological environment.

Download or read book Fundamentals of Continuum Mechanics written by Stephen Bechtel and published by Academic Press. This book was released on 2014-12-02 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Continuum Mechanics provides a clear and rigorous presentation of continuum mechanics for engineers, physicists, applied mathematicians, and materials scientists. This book emphasizes the role of thermodynamics in constitutive modeling, with detailed application to nonlinear elastic solids, viscous fluids, and modern smart materials. While emphasizing advanced material modeling, special attention is also devoted to developing novel theories for incompressible and thermally expanding materials. A wealth of carefully chosen examples and exercises illuminate the subject matter and facilitate self-study. Uses direct notation for a clear and straightforward presentation of the mathematics, leading to a better understanding of the underlying physics Covers high-interest research areas such as small- and large-deformation continuum electrodynamics, with application to smart materials used in intelligent systems and structures Offers a unique approach to modeling incompressibility and thermal expansion, based on the authors’ own research