Download or read book Polymer Glasses written by Connie B. Roth and published by CRC Press. This book was released on 2016-12-12 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: "the present book will be of great value for both newcomers to the field and mature active researchers by serving as a coherent and timely introduction to some of the modern approaches, ideas, results, emerging understanding, and many open questions in this fascinating field of polymer glasses, supercooled liquids, and thin films" –Kenneth S. Schweizer, Morris Professor of Materials Science & Engineering, University of Illinois at Urbana-Champaign (from the Foreword) This book provides a timely and comprehensive overview of molecular level insights into polymer glasses in confined geometries and under deformation. Polymer glasses have become ubiquitous to our daily life, from the polycarbonate eyeglass lenses on the end of our nose to large acrylic glass panes holding water in aquarium tanks, with advantages over glass in that they are lightweight and easy to manufacture, while remaining transparent and rigid. The contents include an introduction to the field, as well as state of the art investigations. Chapters delve into studies of commonalities across different types of glass formers (polymers, small molecules, colloids, and granular materials), which have enabled microscopic and molecular level frameworks to be developed. The authors show how glass formers are modeled across different systems, thereby leading to treatments for polymer glasses with first-principle based approaches and molecular level detail. Readers across disciplines will benefit from this topical overview summarizing the key areas of polymer glasses, alongside an introduction to the main principles and approaches.
Download or read book Fundamentals of Deformation and Fracture written by International Union of Theoretical and Applied Mechanics and published by Cambridge University Press. This book was released on 1985-02-07 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: An international survey of work in the field of deformation and fracture, first published in 1985.
Download or read book Deformation Based Processing of Materials written by Heng Li and published by Elsevier. This book was released on 2019-03-11 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation Based Processing of Materials: Behavior, Performance, Modeling and Control focuses on deformation based process behaviors and process performance in terms of the quality of the needed shape, geometries, and the requested properties of the deformed products. In addition, modelling and simulation is covered to create an in-depth and epistemological understanding of the process. Other topics discussed include ways to efficiently reduce or avoid defects and effectively improve the quality of deformed parts. The book is ideal as a technical document, but also serves as scientific literature for engineers, scientists, academics, research students and management professionals involved in deformation based materials processing.
Download or read book Superalloys Supercomposites and Superceramics written by John K Tien and published by Elsevier. This book was released on 2012-12-02 with total page 789 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys, Supercomposites and Superceramics reviews the state of superalloy technology and some of the more salient aspects of alternative high temperature systems such as superceramics and supercomposites. Superalloy topics range from resource availability to advanced processing such as VIM, VAR, and VADAR, along with investment casting and single crystal growth, new superplastic forming techniques and powder metallurgy, structure property relationships, strengthening mechanisms, oxidation, hydrogen embrittlement, and phase predictions. This book is comprised of 22 chapters that explore key issues of high temperature materials in a synergistic manner. The first chapter reflects on the growth of the superalloy industry and its technology over the past 40 years. The discussion then turns to some of the trends in superalloy development, focusing on what is understood to be meant by the term strategic materials and the current status of resources and reserves in the United States. Particular attention is given to the supply sources and availability of strategic materials. The results achieved from the research program undertaken by NASA Lewis Research Center named Conservation Of Strategic Aerospace Materials (COSAM) are also presented. The chapters that follow explore alternative high temperature systems such as intermetallics, fiber reinforced superalloys, and the processing and high temperature properties of ceramics and carbon-carbon composites. This book will be a valuable resource for professionals and graduate students interested in learning about superalloys, supercomposites, and superceramics.
Download or read book An Introduction to Rheology written by Howard A. Barnes and published by Elsevier. This book was released on 1989-06 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the subject of rheology in terms understandable to non-experts and describes the application of rheological principles to many industrial products and processes.
Download or read book Structural Fabric in Deep Sea Drilling Project Cores from Forearcs written by J. Casey Moore and published by Geological Society of America. This book was released on 1986 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 2 provides a comprehensive macroscopic and microscopic description of the cores. Chapter 1 includes tectonic overviews of the forearcs sampled by the cores and chepters 3 through 6 provide indepth studies of especially significant structural features:faults, scaly fabrics, veins and cataclastic fabrics. Chapters 7 and 8 present detailed analysis of core mineralogy and physical properties, respectively, which lead to fundamental insights into the incipient alteration of sediment in accretionary wedges.Experiments relevant to the interpretation of structural fabrics of DSDP cores constitute the subject of chapter 9. The final chapter provides a theoretical overview of deformation mechanisms operative during deformation of materials from DSDP cores, and the transition to deformation mechanisms that appear to be dominant in equivalent, more buried rocks.
Download or read book Handbook of Software Solutions for ICME written by Georg J. Schmitz and published by John Wiley & Sons. This book was released on 2016-10-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the results of an ambitious project, this handbook provides a well-structured directory of globally available software tools in the area of Integrated Computational Materials Engineering (ICME). The compilation covers models, software tools, and numerical methods allowing describing electronic, atomistic, and mesoscopic phenomena, which in their combination determine the microstructure and the properties of materials. It reaches out to simulations of component manufacture comprising primary shaping, forming, joining, coating, heat treatment, and machining processes. Models and tools addressing the in-service behavior like fatigue, corrosion, and eventually recycling complete the compilation. An introductory overview is provided for each of these different modelling areas highlighting the relevant phenomena and also discussing the current state for the different simulation approaches. A must-have for researchers, application engineers, and simulation software providers seeking a holistic overview about the current state of the art in a huge variety of modelling topics. This handbook equally serves as a reference manual for academic and commercial software developers and providers, for industrial users of simulation software, and for decision makers seeking to optimize their production by simulations. In view of its sound introductions into the different fields of materials physics, materials chemistry, materials engineering and materials processing it also serves as a tutorial for students in the emerging discipline of ICME, which requires a broad view on things and at least a basic education in adjacent fields.
Download or read book Mechanics and Mechanisms of Fracture written by Alan F. Liu and published by ASM International. This book was released on 2005-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Biofluid Dynamics written by Clement Kleinstreuer and published by CRC Press. This book was released on 2016-04-19 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofluid Dynamics builds a solid understanding of medical implants and devices from a bioengineering standpoint. The text features extensive worked examples and mathematical appendices; exercises and project assignments to stimulate critical thinking and build problem solving skills; numerous illustrations, including a 16-page full-color insert; computer simulations of biofluid dynamics processes and medical device operations; tools for solving basic biofluid problems; and a glossary of terms. The text can be used as a primary selection for a comprehensive course or for a two-course sequence or as a reference for professionals in biomedical engineering and medicine.
Download or read book Deformation Theory of Plasticity written by Robert Millard Jones and published by Bull Ridge Corporation. This book was released on 2009 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage Mechanics written by D. Krajcinovic and published by Elsevier. This book was released on 1996-04-22 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the first truly comprehensive study of damage mechanics. All concepts are carefully identified and defined in micro- and macroscopic scales. In terms of the methods and observation scales, the main part of the book is divided into three chapters. These chapters consider the stochastic models applied to atomistic scale, micromechanical models (for arbitary concentrations of defects) on microscopic scale and continuum models on the macroscopic scale. It is intended for people who are doing or planning to do research in the mechanics and material science aspects of brittle deformation of solids with heterogeneous microstructure.
Download or read book Journal of Polymer Science written by and published by . This book was released on 1958 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.
Download or read book Glaciers written by Peter G. Knight and published by Psychology Press. This book was released on 1999 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview from 1999 of a general introduction to glacier study.
Download or read book Atlas of Deformational and Metamorphic Rock Fabrics written by G. J. Borradaile and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In May 1976 Lucian B. Platt organized a highly successful Penrose Confer ence on The Formation of Rock Cleavage at Bryn Mawr College in Penn sylvania, U. S. A. The meeting drew together about 70 specialists from both sides of the Atlantic and from Australasia, who contributed discussions on various aspects of rock cleavage and its formation. Even early in the meet ing it became clear to the participants that they lacked a common terminol ogy, that often the same technical word implied different things to different people and that observables and descriptors were loosely defined. In an at tempt to improve communication the present editors contacted about 190 workers after the conference with a view to compiling a set of photographs with captions to illustrate exactly what workers were talking about. As a re sult the compilation was published as a limited edition by an inexpensive offset process at the University of Tasmania. The success of that provisional edition of the Atlas of Rock Cleavage and the responses of the readers prompted us to make a more extensive collection of material, contact a wider range of workers and, with the support of Dr. Konrad Springer, to publish the present higher-quality reproduction of the contributors' plates.
Download or read book Advances in Plasticity 1989 written by Akhtar S. Khan and published by Elsevier. This book was released on 2016-07-29 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is now an established area of study within materials science and engineering mechanics. The proceedings of the Second International Symposium on Plasticity and its Current Applications brings together papers on all current areas of research into the plastic behaviour of solids. The main emphasis is on dynamic plasticity and study of deformation at crystal level but there are also papers on plasticity in particular materials such as superalloys and metal-matrix composites, the mechanics of damage, and the applications of plastic theory in metal-forming processes.
